Technology is key, if you don’t have night vision. You’ll get killed by someone who does have it.

Schizo doomsday preper wasting your life

Can it be used on a crossbow for deer hunting?

My socket wrench is a Husky and it won't lock, thanks for the video

Found this accidentally awesome video looking to repair a different device. No electrician so no idea what the button end mother board should look

Ok dumb question but how do you charge it!?

Just picked one of these up brand new for 30 bucks in sk5. Can't wait to test it out.

Yes yes I know it's a 12-year-old video but I had to make a comment semi-automatic shotguns maybe the best of both worlds some are even magfed if I use Buckshot I'm actually shooting multiple 32 rounds compared to firing one 556 or the Russian variant and I do like to feed as tactically feed my ammo in my shotguns whether I'm using slugs or a buck shot with that said there is still a place for my AR-15 Bushmaster but I still have five shotguns one is semi-automatic one is a Bullpup with 18 rounds available to Fire and two separate tubes a Mossberg 500 and a really short marsburgh 500 which I think is a model 88 for every Close Encounters if s*** hits the fan I could have family members carry the simplest shotguns while I have the AR-15 which is a little bit more fragile when it comes to using in a situation where I have to make sure the gas points or that the unit does not jam up or malfunction and I know how to clear it shotguns are really good because it's simple ' I have a CZ semi-automatic shotgun I love a thing it's a little bit on the long side so you don't want to take it in close Quarters but if you got the room it's a beautiful firearm One in the Chamber and holds five in the tube two and three quarters kiss keep it simple stupid

Which saiga AK 47 model is this with that stock on it

I spent over 3 hours trying to remove the mag tube. My mossberg 12 gauge is from 1988. Yes it has been very well cared for. Some guy saying he heated it up 15 seconds. I find that hard to believe unless it was removed once before. I did the 1/8 rubber with a pair of vice grips, that didn’t work. Im starting to believe the person that said he had to cut it off. Looks like I’m having to do the same. And that puff shit is BS. I called Mossberg and they said it may have been cleaning oil that did that.

There is NO solvent that can remove red Loctite due to the Limited space for the solvent to penetrate. Heat is the only way. Loctite does make a solvents to remove the product from the threads once removed.

Or you can put around handle for extra grip , i like it

Condor Tactical now sells bags just like this.

You van also ill that botle..plastic bottle filled with water on a fire and it will boil without melting the bottle. I dont suggest doing unless severely in need of hydrating

I wonder why 16 gauge has become extinct.

9.99?? Shit where that at

I started out with a CVA Apollo in stainless. There was a barrel recall on them. I then bought a T.C. Black Diamond great Muzzleloader. Only issue that I can comment on is the small piece of the bolt they are a bogger to keep track of. I like the CVA Striker better.

Nice thing is you can carry a bunch of ammo and not be too heavy and the guns themselves are typically lightweight also, my dad grew up during the depression and hunted boar and dear with a 22, successfully

Why does every American review of a knife contain the words “for the money”?? Can’t you Yanks just judge a knife for its actual capability, watch a British review - No mention of cost!! Just can it do the job! If it can buy it, and stop worrying about ‘ best for the buck!! ‘.. nation of cheapskates!

This is why I love this ammo. 10000 rnds.......not 1 failure at all.

Just got them in and put them on my Keltec, same as yours, and I am very happy with them. Great Video.

i just bought a cattaraugus ..are they all ww2

Judging by the comments here it looks like pmc is not bad after all

My goodness, less talk more action pleaseee. These type of videos should be banned!!!

Hello how did you come across this? Such as what gave you the idea. Also I have a problem if you had any ideas on how to fix. So i purchased a cheap scout light on ebay. Works good. However it will drain a 18650 overnight. Iv owned a bunch of cheap 18650 flashlights and none of the other ones have drained the battery like this unit. It seems to have a parasitic draw. Do you have any ideas on this? Thanks

At one time ??? Vintage Wagner and Griswold are STILL the gold standard today !!!

Mine was pretty dull out of the box but fixed that. But also wanted to have edges on the under aspect of the beard and edges to top & bottom of the spike. Makes it a better fighting tool imho. Thanks for the video

I have an AR pistol 7.5 inch with a tactical law fold. This wilson bag is still too big....Starting to think I'll need a badminton bag

What is that 4th knife? I found one at work trying to identify

I almost bought one. It is too heavy for me. I don't know what it weighs but to Me too much..

You just got the gun, haven't fired it, and you're already doing a critique on it? Rediculous. I wish people would at least own their firearm for at least a month before they have anything to say about it.

Que idiotas son los americanos...comprar relojes solo para burlarse de ellos...digno de ellos...

Hello. My tactical zoom flashlight gets super hot, and the light will often flicker from high to low beam when using same size rechargeable batteries. All batteries tested at 1.5 volts before use. Any idea why the flashlight would getting too hot and flickering?

Fully agree with your message Great video. Thank you.

Thats barrel tolerance not ammo had a g2c that no matter what nickel plated federal i ran in it and i wouldnt trust federal ive had 3 bad boxes in 3 different calibers in 3 different years

Underneath the hard plasic pommel is steel. This is a full tang knife.

Mine came with a simmons scope. Its ended many groundhogs.

What you are showing is simple but what about doing these things with a REGULAR SIZE FLASHLIGHT?????

Get a couple of magnets to hold those bars in place.

Wazikashi? They are not a toy. They are budget but also a practical tool....I took down 4" diameter maple and oak trees with small bites like a hatchet with my katana machete. De limbs and can even be used as a draw knife to debark poles. Though it does cut better with a slicing drawn swing then a chop. Slippery? Did you test it? The grip is so harsh it needs to be sanded smooth and then it still grips well bare handed or gloved.

First and last time using this brand. Had problem with two of my Glocks and one CZ pistols with about 4 or 5 light strikes. Never had this issue with any other 9mm ammo brands.

I love that I used to watch these as a teenager when I either couldn’t afford or wasn’t old enough to buy a lot of these things…now I’m in my 30’s, have collected a bunch over the years, and now I come back for nostalgia and to see how far I’ve come lol Funny how my love for zombies eventually morphed into becoming knowledgeable about all kinds of weapons, gear, medical, survival, bush craft, being an EDC guy, etc. lol Gotta be honest, it’s guys like you back then making videos for fun who helped me get to where I am today.

Just got rid of my thumbhole stock for a side folder

I'll take your advice apart from being recommended by the world heath organism

This is a 12 year old Video and my my how things have changed. First off OKC Sp-1 is by far the DULLEST "OUT of the Box" knife I have ever acquired. It took hours to bring the blade to KA-BAR standards. Secondly OKC is not producing knives anymore and I can quess why. QUALITY CONTROL!!!!! -- The knife I acquired did not have a sharpened back blade. So, the only difference is the OKC has a hole in the handle. Whooopie freakin do. I'll take KA-BAR everytime AND KA-BAR is still in business.

I've had 6 of these over the years, including the OMG, I can't believe they're still around pair from a surplus store. Kids got the rest. I'm rigging mine with a slip through bar for Alice clips. Or just use 550 cord through pistol belt grommets. BTW, as to quality, I've seen photos of Indian SpecOps using these. Back center on belt kit. Probably as blow out / boo-boo kit. I couldn't tell if they're nylon or canvas, mounting technique, but the configuration is the same. Rothco should bring these out with PALS type webbing, or Alice type. I'd definitely bite.

Do I need to shoot and re-zero my .22 after swapping the turrents for bullet weight?

Sticking your hand there. I dont use gloves. Ive never cut myself sharpening or using knives. I only cut myself when i fell asleep with my knife out of sheath. Minor cut. You slammed down on your hand with the axe coming down. I see so many videos of guys cutting towards themselves or notching without putting their hands and fingers well behind the blade. They cut thru wood to the fingers

When I bought my Mossberg 590 Retro, the first thing I did was field strip it and reassemble it 8 times so I thoroughly knew how to clean it. Then I took it to the range. I do that with every new gun I acquired over the years. Master it before you use it.

Thanks. Really helpful. I appreciate you keeping in all the possible things that can go wrong.