I had to stop reading comments in most videos. Woodworking is often helpful though. Usually there are good tips shared with an honest desire to share knowledge. This comment section reminds me of a young woman who was so hassled by viewers, she left the platform. Her hair was waist length and flawless. Normally, this is because we’ve never had a big hair cut. Hers was a conscious effort and she wanted to share what she learned. It’s shocking how many people came to learn something and left horrible comments. If they knew so much, why were they looking for instructions? “You’re not brushing correctly!” the desperate short-haired women yelled at the long-haired woman with hair they worship. I think it’s great to see modifications for safety and I appreciate the ideas! Anyone who doesn’t can make their own ******* video.
@TheNewbieWoodworker2 сағат бұрын
LOL. I don't worry too much about the negative comments I get - honestly I don't get that many negative comments. I knew this video would be different because I brought it on myself. So I'm cool with them.
@diydavemanКүн бұрын
This seems like the bucket on the inside would still be collapsing but you just can't see it? Hmm
@TheNewbieWoodworkerКүн бұрын
Some times that does happen, but you can tell because it changes the shape of the outer bucket. So as with most things, this doesn't always work. With that said, I suspect some hot glue could solve that problem.
@Ted_James2 күн бұрын
Very informative video! Brilliant idea about the box over the T-track when cutting. I'm going to make one of those for wood cutting as well as T-track cutting. It seems like a great way to keep dust from flying all over the place. Also, great idea about using carriage bolts (got a ton of them). I'll be checking out more of your videos.
@TheNewbieWoodworker2 күн бұрын
Awesome! Glad I could help. 🙂
@ridingunicorn64762 күн бұрын
Perfect video. I'm sitting here looking at my options for the Jobsite Sawstop. Thank you!
@TheNewbieWoodworker2 күн бұрын
Awesome! Glad I could help. 🙂
@bigpete42273 күн бұрын
Cheers mate. Just followed your vid and did the job, subscribed.
@TheNewbieWoodworker2 күн бұрын
Awesome! Glad I could help. 🙂
@charlesburnett92094 күн бұрын
Excellent video! I am trying to drill ipe(ironwood) bench slats to accomodate carriage bolts. Can I use a Forstner bit on my hand drill? I anticipate using carbide bits due to hardness of the ipe.Thanks.
@TheNewbieWoodworker3 күн бұрын
I wouldn't use forstner bits to cut into pipes - they're designed for wood. I'm not sure what you could use, actually.
@danbromberg4 күн бұрын
Well presented but I was hoping for an example of drilling through the side of an already hung cabinet.
@TheNewbieWoodworker3 күн бұрын
Sorry, but showing examples for every way you could use them isn't really practical.
@jacob-thegoat5 күн бұрын
Very informative video. Thank you 🙏
@TheNewbieWoodworker5 күн бұрын
Awesome! Glad I could help. 🙂
@katecindy4145 күн бұрын
Thank you
@TheNewbieWoodworker5 күн бұрын
You're quite welcome! 🙂
@graham88548 күн бұрын
genius!
@TheNewbieWoodworker8 күн бұрын
When it works, anyway. 😂
@GemCityPhotons11 күн бұрын
I have this exact model drill press, I bought it from Sears when they were going out of business for a quarter and a song. As I was drilling tonight. POP! You were the first search result. How incredibly handy. The model you've linked to doesn't appear to be the same size as the one you originally selected. You think it will work ok in this 10" craftsman? Thanks!
@TheNewbieWoodworker11 күн бұрын
Honestly, this was so long ago that I just don't remember. Sorry!
@GemCityPhotons11 күн бұрын
@@TheNewbieWoodworker Oh no worries, for ~$7 I just ordered one, and if it fits, great, if not, I can poke around and find another one.
@TheNewbieWoodworker10 күн бұрын
@@GemCityPhotons The nice thing is, if it doesn't fit, you'll have a better idea of what you need to get.
@GemCityPhotons10 күн бұрын
@@TheNewbieWoodworker Yeah, honestly, I didn't realize it would be this easy. I should have, because a spring is a consumable part, but I suppose I just never thought about it until it popped.
@TheNewbieWoodworker10 күн бұрын
@@GemCityPhotons Actually, same here. I found an obscure video that mentioned it, and it was one of those forehead-smacking moments - of course!
@rc0101010111 күн бұрын
So many issues. One I haven't seen mentioned is tapping into plywood for the machine screws. They'll come loose and out of alignment constantly, not to mention wood makes a terrible sled guide.
@TheNewbieWoodworker11 күн бұрын
Baltic Birch Plywood is plenty strong enough for the threads - I've never had a probem even after 4 years. But if threading the runners bothers you, then don't do it. As for wood making a terrible sled guide, I'm not sure where you got that from, but it's wrong. Yes, *some* wood isn't good for it, and you should always take grain direction into account, unless it's good quality plywood in which case the grain direction doesn't really matter. I have multiple sleds for various usages, and the wood runners have never been an issue.
@dougthomson554412 күн бұрын
You’re not alone brother, not at all. After years of no accidents, I was cutting some very old, very hard maple and had about 1/8” above the saw blade. I should have cut 1/2 depth and flipped the board over and cut the other half, but the board was thick and very heavy and I just didn’t. My old Unisaw could cut the whole thing in a single pass, so off I went. The saw wasn’t pooped, but I was and I cut the power, leaned on the board to rest and put my right hand (good hand) right on the spinning down blade. Remember only 1/8”, maybe less above the wood, so luckily I still have my fingers, but there was a lot of blood. I just grabbed my hand and said to my wife, “Linda, it’s time to go to the hospital now.” So off we went and I ended up with an emergency doc who did the most beautiful stitching (about 80 or 90 stitches on four fingers). The scars are now barely visible but my finger tips are quite numb, get very cold and painful in the winter, and don’t do things like chopsticks very well. Stupid, tired and impatient … I knew better and got VERY lucky as did you. That could have hit your face or a carotid, or … Thanks for the story.
@TheNewbieWoodworker12 күн бұрын
Thanks for your story too. Your story is one of the reasons I own a SawStop. Because you just never know...
@tombosanko308513 күн бұрын
Ouch I always try to be careful around any power tools. No matter how careful a person can be, accidents happen.
@TheNewbieWoodworker13 күн бұрын
True enough!
@raymundomarroquin710513 күн бұрын
Thank you!
@TheNewbieWoodworker13 күн бұрын
You're quite welcome! 🙂
@MrWetnutz14 күн бұрын
Well, I did kill myself and it's all your fault.
@TheNewbieWoodworker14 күн бұрын
Wow, what ISP works from the afterlife?
@MrWetnutz14 күн бұрын
@@TheNewbieWoodworker Spectral, Eternity Warner, Deceased Online, just to name a few.
@TheNewbieWoodworker14 күн бұрын
@@MrWetnutz LOL! I prefer "Time's Up Warner". Damn, I should be better than this, but that's all I got.
@user-pd7hk8ux9c16 күн бұрын
The reading sliding gauge part on your video is not the same as on your website? Is there any difference in calibrating?
@TheNewbieWoodworker15 күн бұрын
Honestly, I don't know. I'm sure they've changed things in the 4 years since I put out this video.
@tonycosta330216 күн бұрын
The Dust Deputy is the real deal. It’s so efficient I have barely a handful of dust in my vacuum after more than two years. You will. Never buy a filter again.
@TheNewbieWoodworker15 күн бұрын
👍
@kkbell18 күн бұрын
Thank you! This was helpful on calibration with the current unit. I have the original version but have recently ordered the new sliding gauge part. I never liked the blade routine on the old unit, so this is what I did in case it helps anyone. Set your fence anywhere, rip a stable hardwood at some random width, and zero the Wixey. Then measure the ripped board and back the fence up to negative that number. When you get there, zero the Wixey again. Done.
@TheNewbieWoodworker18 күн бұрын
👍
@yzn712218 күн бұрын
it was a small piece stuck in the clutch ,it works thank you<3.
@TheNewbieWoodworker18 күн бұрын
Awesome! Glad I could help. 🙂
@RishikaRaghava19 күн бұрын
THANK YOU ❤
@TheNewbieWoodworker19 күн бұрын
You're quite welcome! 🙂
@alistermunro709020 күн бұрын
I've spent more time watching videos such as this than I have with my power tools. Thanks for posting.
@TheNewbieWoodworker20 күн бұрын
You're welcome, and I know exactly what you mean!
@pidgeonpost21 күн бұрын
Perfect! Just the information I need. Thanks fella!
@TheNewbieWoodworker20 күн бұрын
Glad I could help! 👍
@BowlCupNIXC7522 күн бұрын
Bro my 0.3mm MP Wont work. If I flip the pencil down the head literally just falls out. And IF I REPLACE THE 0.3MM refill. What happens? Breaks easily. Didn't work well enough. Got even worse- wasted my 1 dollar for it.
@TheNewbieWoodworker21 күн бұрын
Sorry, I can't help.
@BowlCupNIXC7520 күн бұрын
@@TheNewbieWoodworker just found out that there's so many refills inside the eraser part. Still not easy to replace tho,New subscriber also.
@TheNewbieWoodworker20 күн бұрын
@@BowlCupNIXC75 👍
@NotBobMemes23 күн бұрын
Do you know how to fix a mono graph?
@TheNewbieWoodworker23 күн бұрын
No, sorry.
@Brandon-lz5xc24 күн бұрын
I wonder if this is the future of woodworking in the western world. As more and more jobs are displaced, many people will try to enter into the trades while thinking hazards are just a matter of opinion. Never take cuts deeper than half the diameter of the bit. Take several passes and save time from going to the hospital. Always be prepared to put on a torniquet. Remember to never ask the tool to do something it doesn't want to do.
@TheNewbieWoodworker23 күн бұрын
Cynical much? Read the name of the channel. This has nothing to do with someone wanting to "enter into the trades", and it's definitely not about someone (me) thinking hazards are a matter of opinion. It's about someone who obviously didn't know enough about what he was doing, and is lucky this is all that happened.
@TosaNewsense24 күн бұрын
Lovely mechanical lift you've built they're sir.
@TheNewbieWoodworker24 күн бұрын
Thanks! 🙂
@wireaddict9924 күн бұрын
People saying thanks for sharing like they learned something… what actually happened??!!! How the heck did the router catch and climb up the wood and across the room? I want to know how you were holding it and if you were even going the right direction. This should never have happened. I use routers all the time and have been woodworking for 30 year without ever drawing blood. This is not a lessons learned, this is an advertisement for how a safe tool like a router can become dangerous if you don’t understand the tool.
@TheNewbieWoodworker24 күн бұрын
You are completely correct. Unfortunately I don't have any answers. I have some guesses, but no answers.
@frankb28019 күн бұрын
The answer is given at 3:48, though expressed as probable explanation. By inadvertently tilting the router, the bit gets a grip into the wood at an angle, then climbs/stair steps the wood in an instant. When attempting to move the router away from the wood, it may feel more natural to tilt the router grip towards the outside, while, at the same time, that gets the lower, rotational side closer to the wood., actually, into it. Bam. I am happy to learn from videos like this and spend time on familiarizing to use tools safely. To the latter: note the big red emergency off button that can be activated by knee. You should have that in a self-made router table. Something in the design of the router table catched my eye: The lever seems clever but is it fastened in its position so it will not move if accidentially hit by your body/knee/leg (read: with some force)? If not, shortening the lever and putting a frame around it might be an idea.
@TheNewbieWoodworker19 күн бұрын
@@frankb280 Thanks. The weight of the router keeps it from moving. Yes, you can make the lever shorter if you want, but in practice I'm much more likely to hit the corner of the table (because I'm a klutz) than the lever. You'd have to stand a lot closer to the table to hit the lever than you might think. Here's the build video: kzfaq.info/get/bejne/grChg6dyqc-cfYE.html
@RobertDickens200225 күн бұрын
Kit cost too much could be built so much cheaper
@billylusk351525 күн бұрын
Wow! Crazy ! And youre very lucky
@TheNewbieWoodworker25 күн бұрын
Yes I am - thanks.
@josephsirianni658626 күн бұрын
Can't find part2
@TheNewbieWoodworker25 күн бұрын
It wasn't very good, so I removed it.
@josephsirianni658623 күн бұрын
Thank you
@TheNewbieWoodworker23 күн бұрын
@@josephsirianni6586 👍
@phil03106626 күн бұрын
Lost half my thumb after a bracket holding the router under the (cheap) table failed . The surgeon flapped skin over the joint but but the joint ended up seized. I think they are potentially the most dangerous tool due to their small size but fierce speed.
@TheNewbieWoodworker26 күн бұрын
Man, that sucks. And I agree - they're so easy to underestimate. Along with the size and speed, they're pretty quiet when turned on but not cutting anything. Easy to get complacent.
@SurviveTheDay27 күн бұрын
You opened talking about saw safety and you cut your runners by pushing your left hand right up to the turning blade with no guard in place. At this point I stopped watching.
@TheNewbieWoodworker26 күн бұрын
You aren't the first to mention that. It took me awhile to get used to using a blade guard - I'm not perfect.
@garrettguitar28 күн бұрын
The body is seriously amazing, isn't it?!? I'm happy for you that it's gone back to normal!
@TheNewbieWoodworker28 күн бұрын
It really is, isn't it? And thanks.
@randsipe22428 күн бұрын
It’s wise to use a blade guard but I find it’s only useful when ripping long boards. The thing is, kick back is rare in that operation. It’s when ripping a short piece of wood it’s most likely. Ironically that’s when you’re least likely to use the blade guard because it obstructs your ability to use a push stick. I think one accessory that can help mitigate kick back is Board buddies, stock guides or overhead feather boards. They hold the workpiece against the fence, force it down and keep it from lifting on to the teeth of the blade. That’s when you’re most likely to get kick back.
@TheNewbieWoodworker28 күн бұрын
👍
@randsipe22428 күн бұрын
The danger of kickback is 1. that it’s so unexpected and 2. That you don’t even have to be anywhere near the blade to get hurt by the missile. When you think about A table saw injury the first thing that comes to mind is contact with the blade itself, not kickback. Yet kickback is so unexpected you are more vulnerable. It’s the stealth weapon of the table saw that is out to get you.
@TheNewbieWoodworker28 күн бұрын
👍
@randsipe22428 күн бұрын
The only power tool that hasn’t bitten me is my chop saw. Most recently I made a really stupid mistake. I took the riving knife off my table saw because I was using a thin kerf blade to do some resawing . I needed to make a simple rip cut before continuing with the resawing so rather than replacing the blade and riving knife I proceeded with the same setup. The workpiece got caught between blade and fence and kicked back at me at high speed. It took 3 chunks of my flesh. One on my palm, one on my forearm and one on my chest. The one on my arm was bad. Very deep into the tissue. It was a bloody mess. I was 6 hrs in the ER. I had 10 stitches . This was a week and a half ago and I’m just starting to heel up. So fellow woodworkers I do not advise removing the riving knife, use feather boards and push sticks whenever possible. And if you can afford it get a Sawstop table saw.
@TheNewbieWoodworker28 күн бұрын
That's horrible - I hope you heal up well. But just an FYI, a SawStop (which I have and love) wouldn't have helped in that situation.
@sylvano195529 күн бұрын
Great! Thank you.
@TheNewbieWoodworker28 күн бұрын
You're quite welcome! 🙂
@daveliss808Ай бұрын
Nicely done!
@TheNewbieWoodworker29 күн бұрын
Thanks! I appreciate it! 🙂
@GeneralPublic0000Ай бұрын
Great idea! I’m going to do that below my workbench for the Harbor Freight cases.
@TheNewbieWoodworkerАй бұрын
Awesome! Glad I could help. 🙂
@GeneralPublic0000Ай бұрын
Excellent video and very informative! I have a similar set-up, but I replaced my ShopVac with a 9 gallon one from Harbor Freight. I found the suction improved tremendously, the noise was less, and the filter and bags were much cheaper.
@TheNewbieWoodworkerАй бұрын
👍
@jerrycollins4893Ай бұрын
Great video! Timely for me as I am setting up my shop and dust collection is on the agenda.
@TheNewbieWoodworkerАй бұрын
Awesome! Glad I could help. 🙂
@skeeter197140Ай бұрын
I got REALLY lucky a few years ago using a trim router. The boss had an old router with no guards and a roundover bit that we used for rounding over (duh) sharp edges on Azek trim. I was WALKING with it running, and something about that gyroscopic feel made it swing and hit my other hand. But just the fingers. I just grabbed electrical tape and wrapped them as fast as I could. An hour later, they hurt so bad, I decided to take the tape off, and I had the tape wrapped too tightly- it felt a little better as soon as the pressure was off. I looked down and I had pretty deep and ragged gashes across three fingers, but it wasn't as bad as I thought. It was really dumb of me, and I never used that router again.
@TheNewbieWoodworkerАй бұрын
Wow! Maybe the takeaway should be to turn the router off before walking with it.
@goodie2shoesАй бұрын
I'm forcing myself to watch this. I never want to get too comfortable around my powertools
@TheNewbieWoodworkerАй бұрын
👍
@Meme4every1Ай бұрын
hey! a lead got stuck in the tip of graph gear 500 and when I tried to use hammer and a thin needle and the tip of the needle broke and it is stuck inside there with the lead.So i was wondering should i cut the tip a bit or it is broken? I also cannot buy another one because it cost 5$ to get another.
@TheNewbieWoodworkerАй бұрын
LOL. Go borrow $5 from a friend.
@sw4ncuhАй бұрын
use the eraser's sharp thing to get it out
@bp97borispolsekАй бұрын
Wow, really interesting cause of this accident. Never thought of this. I am researching more accidents since I chipped my finger on the jointer with a workpiece that was too small the other day. Luckily nothing too serious, but need to be more careful. I am happy you healed up so quick an nicely
@TheNewbieWoodworkerАй бұрын
That made me shudder just thinking ahout it! Glad your OK too.
@wisloka1997Ай бұрын
Tip. Measure distance from the fence to the cutting blade it's more accurate ❤
@TheNewbieWoodworkerАй бұрын
👍
@swope9633Ай бұрын
I had my own hand held router incident recently. After a lot of bad decisions my biggest router bit ended up caught in my pants and got pulled into my calf. I didn't feel anything and thought it only got caught in my pants which bound up the router up. As I started to try and get the router out from my pants I realized it was in my leg as well. Still felt no pain so I just yanked it hard enough to free it from everything. My leg was an absolute mess to look at but I managed to drive myself to the urgent care nearby. I will say when they had to clean it out it was some of the worst pain I've ever felt in my life. That a few months ago and I'm all healed up now. Thankfully no major damage just a nice scar. I know it could have been much worse and thankful it wasn't. I'm glad you made out as well as you could with your injury as well.
@TheNewbieWoodworkerАй бұрын
Holy crap! Yeah, I think it could have been MUCH worse. That was too close for comfort. I'm glad you made it out with just a scar.
@fredio54Ай бұрын
Did you ever find a track saw tslot compatible cutter?
@TheNewbieWoodworkerАй бұрын
I don't understand the question.
@fredio54Ай бұрын
@@TheNewbieWoodworker You went over what fits/doesn't for each - what we all want, and I presume that includes you, is one that creates the same dimension slot that every festool clone rail has on the top and bottom and every generic t-track extrusion uses - ie 8mm opening 12mm width at bottom. I have contemplated using a diamond wheel to make my own out of a generic cutter the right size eg half inch straight ground down could do it in combo with an 8mm straight to clear the path in advance similar to the rockler one but smaller.
@fredio54Ай бұрын
@@TheNewbieWoodworker In particular you stated at some point "there may be a better cutter than either of these" and it was to this that I replied. :-)
@TheNewbieWoodworkerАй бұрын
@@fredio54 Ah, got it. Thanks for the explanation. No, I haven't, but then again, I haven't really needed one in a while.