What you are feeling with the shock is the “brain” tuning, it’s going to ride like a hard tail unless there is enough impact to get past that stiff spot in the start of the stroke. The bike will definitely make you pick your lines a lot cleaner, vs a longer travel bike, but that’s not a bad thing. And practice those wheelies, a little pedal power from the seat, a bit of a wheelie and you can pivot off the rear and swing the front end around really tight corners with ease. Keep putting the miles on it and you will get the muscle memory locked in on it. I bought mine to replace my old camber, since that had such a steep head tube angle it was really hard to from that to my stumpy evo, now with the chisel I can jump on either bike n go. One climbs way better and the other rips down way better, and lets me ride sloppy lines😂
@djberg348313 сағат бұрын
Nice build, I started with the comp for the wheels n fork, and it’s full XT now, and being an XL it’s just barely under 29#, but I’m already oogling a set of hunt xc race wheel that should get me down another pound and change so here’s to another $500🤣, but the stock wheels can go on my daughters bike for when we do xc rides, and keep her other set for chunkier stuff. But I love mine, how was your first ride on yours?
@DaBinChe7 сағат бұрын
I have a video about the the first ride.
@BayawKhem2 күн бұрын
Did you balance the tire after installing it?
@DaBinChe2 күн бұрын
no need too small and light
@BayawKhem2 күн бұрын
@@DaBinChe thank you!
@sk8moto2 күн бұрын
saw some kid in a modded out Honda Fit on Hwy 9, very impressive! supposedly the chassis is quite stiff.
@DaBinChe2 күн бұрын
it is pretty stiff for an econobox but the rest of the suspension is very flexy/soft. I have swaybars and that helps but can still feel the softness of the stock springs....but compared to my Miata it is night and day
@sk8moto2 күн бұрын
@@DaBinChe yeah, his is far from stock, I can see his rear modded suspension because it was missing the rear bumper. I pulled over to let him by on the downhill, he was gone right away, but then I am in a stock Camry, LOL.
@mgphotostudio2 күн бұрын
You talk to much man.. its just a tach.
@keatoncampbell8203 күн бұрын
As a pro welder im so glad you figured this out. A lil harbor freight helmet is my backup and i forgot my fancy miller! Lifesaver!
@mourecebrown33373 күн бұрын
Why u decided to clean it... What was the symptoms of the car?
@DaBinChe3 күн бұрын
Was doing valve adjustment and intake valve cleaning, since the throttle valve was off clean it while there
@1blackpaper3 күн бұрын
Hey Ben ! can you give me you experienced opinon on a 2010 honda sh150i with 8,000 miles. I am thinking of buying for 2,000. parts seem to be available still. how many worry free miles you think i can expect from this scooter ?
@DaBinChe3 күн бұрын
I would say honda scooters are good for 50k miles before things wear and needs attention. Other wise it is the normal scooter stuff: drive belt, variator, roller weights, brake pads, and fluids.
@selwyn135 күн бұрын
I like how he specified that u only need to wait for a single fan cycle.
@bandejabros5 күн бұрын
Just got this frame. Thanks to your videos. Considering changing the rear shock. What do you think?
@DaBinChe4 күн бұрын
I'm think of that too but not sure if it is worth it to do so. From what I hear the internals are the same setup just the materials is higher grade in the higher end shock. I think as is it rides well. Depending on what fork, if using a Fox, might want to try a FoxShox
@watersystems60455 күн бұрын
Why wouldn't you use a Shopvac and save hours of clean-up later. I'm going to say don't follow your advice, you are an accident waiting to happen.
@tdatu6 күн бұрын
hmm... is the CF number the one suppose to be printed or the Sticker Issued number?
@DaBinChe4 күн бұрын
yes, that is the "license plate number"
@2LiterJayThe20YrOldDouche_bag7 күн бұрын
How do you turn on the Bluetooth
@s0yoderz8 күн бұрын
i have a CBR 300R and im around 7k-8k @ 70mph. i weigh 145lbs + full gear and a backpack. i have an K&N air filter and Arkapovic exhaust, and Sex Machine Racing 6 Disc Clutch with 60% firmer springs. i do a lot of commuting on the highway and was wondering if this 15t would be a good with all my mods. i can hit 97 mph full tuck @ rev limiter.
@donkublon96268 күн бұрын
when i wanna charge my battery in the bike should i have discharger out and braker off ?
@mtb7178 күн бұрын
I love aluminum frames. I have my 2018 Chisel and I love it
@jas35010 күн бұрын
You need to tighten the axle nuts alot tighter
@dragostank648510 күн бұрын
Great upgrade. How do you like those footpegs, they look lower like 1/4 inch then stock?
@DaBinChe10 күн бұрын
They are slightly lower cause the stock has the rubber..but once removed think the metal spikes are still slighter higher up
@dragostank648510 күн бұрын
@@DaBinChe is feeling much better, comfy?
@mikehawkswollen581912 күн бұрын
What is the reason for stem lock if the riser is directly mounted to triple tree? Thank you
@DaBinChe11 күн бұрын
It replaces the star nut that bicycles use to preload the headset bearings.
@mikehawkswollen58199 күн бұрын
@@DaBinChe thank you 👍
@mikehawkswollen58199 күн бұрын
@@DaBinChe so the stem lock preloads the bearings more efficiently than the star nut or is it just more secure than the star nut?
@DaBinChe4 күн бұрын
@@mikehawkswollen5819 no it is just a different way about the same result
@mikehawkswollen58194 күн бұрын
@@DaBinChe thank you 👍😎
@2367rguzman12 күн бұрын
Great wheels. I have them on my eg6. For the price they are really good. Very light.
@JG-bl5nm13 күн бұрын
Do you have sufficient head room with the rigging above your head or do you have to duck Everytime you tack your boom over.
@DaBinChe11 күн бұрын
Have to duck a little everytime, not too bad at all
@cordobes13 күн бұрын
Missed the whales, what's the motor?
@DaBinChe11 күн бұрын
yamaha 90 outboard I think, pretty quiet if not rev high
@cordobes5 күн бұрын
@@DaBinChe Thanks. Impressively so, I genuinely thought it was electric up to the last few seconds of the video
@LuckyNikitaBoba15 күн бұрын
Jesus Chris! Enough with the JIS specification talk. Actually, you talk too much. The stock handlebar is garbage. Apparently, you don't ride off-road.
@DaBinChe14 күн бұрын
stock handlebar is fine unless you crash a lot
@MikeM-mv1ru16 күн бұрын
This CS-AC490-MKD Shift Well Cover for Mazda MX-5 Miata RF 4th gen ND 2017 to 2024 is only designed to fit the CS-AA100-SPW Short Shifter for Mazda MX-5 Miata RF 4th gen ND 2017 to 2024 New. It will not fit the standard Mazda longer throw shifter. From CravenSpeed's website description of this item Fitment The shift well cover was designed specifically for use with our short throw shifter for the ND. It is not compatible with the stock shifter due to the width of the shifter. This kit does not include a shifter or shift knob, which can be purchased here.
@steve273616 күн бұрын
Smart, well planned, logical and realistic. You are a true competitor. Good luck for you in ‘25!
@572229116 күн бұрын
Link for the windscreen please
@DaBinChe16 күн бұрын
Don't remember where I got it, maybe revzilla
@MilesToRoam8517 күн бұрын
I was thinking the same thing as first comment
@biggusdickus373917 күн бұрын
Lower (3rd) downtube bottle screw was for the swatbox on the epic versions.
@pingislife265317 күн бұрын
I was afraid of breaking the securing mechanism on my fuel line. Thank you for showing how to remove it.
@thomcazel37217 күн бұрын
Need to learn to speak more clearly, with logical sentences……. Otherwise thanks……👍
@dangareau18 күн бұрын
Thanks for this. I got so pissed that I grabbed that mushroom shaped metal piece barehanded and pulled the whole insert out. I was twisting it with the same Vessel screwdriver that you have there and just yanked out the throttle side. If you didn't know those grey handled ones are self contained impact screwdrivers. Hit the end with a hammer and it'll twist counter clockwise.
@assisimo976919 күн бұрын
21 is too much 20 is aight
@DaBinChe18 күн бұрын
20 is not a common size good luck finding many tires for 20, 21/18 is the most common size and that is what dirt bikes normally come in...even the stock 19 is not a common size.
@COOLBIKEyt19 күн бұрын
Hi, mud gurad on the seattube is glued, or bolted?
@DaBinChe18 күн бұрын
Was looking at it today and it is glued I think, didn't see a bolt/screw. But the hole where the cables run thru is bolted, you can see it.
@COOLBIKEyt18 күн бұрын
@@DaBinChe Thanks for the answer, cable port is the same as in my Stumpjumer. I was just curious about this smal fender ;)
@DaBinChe18 күн бұрын
@@COOLBIKEyt if the stumpy doesn't have that small fender could maybe get one for it
@COOLBIKEyt18 күн бұрын
@@DaBinChe You probably can't buy them :D
@DaBinChe17 күн бұрын
@@COOLBIKEyt Was looking at the owner's manual and it has a part number: S246900004 also says it is double sided adhesive tape so yeah not bolted on Specialized has the owners manual PDF on their website.
@thanasimamais32019 күн бұрын
Woah this frame looks so sick. On the website it looks like a plain boring dark red but this colour is amazing
@erincollins882819 күн бұрын
Silly me, I thought you were actually going to show us how to use it. lol
@JudemanArt20 күн бұрын
Thank you. I was going to trade up my SH150i, but I love the thing. It's a fun and capable bike.
@DaBinChe20 күн бұрын
Yes it is a great bike and now rare in the US.
@edwinthompson15920 күн бұрын
what kind of cruising speed do you get from the Trail?
@DaBinChe20 күн бұрын
50mph cruise, 45mph if you are heavier Tucking while drafting a truck going steep downhill it'll do 60mph.
@edwinthompson15920 күн бұрын
@@DaBinChe Thanks, as much as I wanted a Trail I went with the Cub for the extra cruising speed. Enjoying the vids on the Cub you have, very helpful
@DaBinChe20 күн бұрын
@@edwinthompson159 Yeah the SuperCub is way faster than the Trail.
@sk8moto21 күн бұрын
bummer... btw I seen u riding on hicks, you caught up to me before on that zero, lol, u are quick on that thing.
@DaBinChe21 күн бұрын
That's my backyard so got home court advantage.
@sk8moto14 күн бұрын
@@DaBinChe It's my backyard also, I am just slow, lol
@kevjones891521 күн бұрын
try resettig the bms
@DaBinChe21 күн бұрын
I heard about resetting the bike, not sure how but I'll look into it.
@myopinion35321 күн бұрын
I was waiting for you to bleed the line before using, per instructions.
@DaBinChe21 күн бұрын
It worked fine without bleeding so it was good. If it didn't would need to bleed
@lucutes293622 күн бұрын
12:02 what's happening here
@DaBinChe21 күн бұрын
That is the chain tensioning dial, give it slack so it goes in easy.
@SergeyPopach23 күн бұрын
you need to learn how to make videos. Put your camera closer to what you are doing. Who cares what you are saying. It’s video, not radio session. Show the process in details.
@DaBinChe23 күн бұрын
You buying me camera equipment?
@TomyTekOutdoors23 күн бұрын
Is the 4200 still holding up well? I was told that Marine Good should work just fine. I'm about to install one now.
@DaBinChe23 күн бұрын
There is one edge that about 4inches that has seperated. I tried to find the 5200 but seems like it has been banned in CA
@TomyTekOutdoors23 күн бұрын
@@DaBinChe thanks for the reply. 5200 is pretty nasty when you get it on things you didn't intend to. I'm going to try Marine Goop.
@nadiasalman154525 күн бұрын
What size these wrench you using
@Valdemar126 күн бұрын
You are not doing it proper way...
@jeffamador964225 күн бұрын
He over complicated everything then the stuff he did wrong made it even more confusing
@mtb71728 күн бұрын
Will you make video with building this bike?
@DaBinChe28 күн бұрын
No, already built up and ridden. I have a build and weight video
@mtb71728 күн бұрын
@@DaBinChe Yes, I’ve already seen. Beautiful bike. I have 2018 Chisel and it’s amazing. There’s building video on my channel. Hello from Ukraine
@SAMen0729 күн бұрын
good point, tnx for the review.
@JaydenParris-k7z29 күн бұрын
My lead 110 shut off when driving and the engine light stays on