Пікірлер
@YayFlyingCat 10 сағат бұрын
i think this saw and the milwaukee version are pretty similar. ive owned both and they seem pretty much the same when it comes to power and weight. the only real issues i have with this saw are the single bevel and the awful LED light it has. i really dont see what the point of it is. it doesnt cast a shadow line and it hardly lights up the work area
@XX-sz6qh 12 сағат бұрын
The grip on the milwaukee is how you drill if you want to deill straight. Thats how we are taught in aviaition
@TeamDIYNow 12 сағат бұрын
BOSCH GCM18V-07SN PROFACTOR™ 18V 7-1/4 In. Single-Bevel Slide Miter Saw (Bare Tool): amzn.to/4c6oMHD BOSCH GAS18V-3N 18V 1.6 gallon Vacuum Bare Tool: amzn.to/4canVpk BOSCH GCM18V-10SDN PROFACTOR™ 18V 10 In. Dual-Bevel Slide Miter Saw (Bare Tool): amzn.to/3RG991r BOSCH GCM18V-12SDN PROFACTOR™ 18V 12 In. Dual-Bevel Slide Miter Saw (Bare Tool): amzn.to/3KYyOP5 BOSCH GXS18V-16N14 18V Starter Kit with (1) CORE18V 8 Ah High Power Battery and (1) 18V 16 Amp Battery Turbo Charger: amzn.to/3xmnFoh BOSCH 18v CORE Battery (4ah, 8ah, 12ah): amzn.to/47EktQA
@kermitefrog64 18 сағат бұрын
I tried this and it is still not staying lit. I am having to relight the pilot light at least once a week.
@TeamDIYNow 12 сағат бұрын
Check the vents to make sure they are not clogged. Some will stay on for years by just turning down the heat setting which is just bypassing the questionable thermostat and others may need repaired. My guess the core problem with these thermostats is they give off incorrect high temp readings which triggers the safety feature to shut off pilot. If that reading is somewhat in range, you can get by with the temp setting being lowered (mine hasn't went off in 3 years now)...if its way off then you may need to replace the thermostat. Good luck.
@giorgipachuashvili2173 Күн бұрын
wich model is more reliable?
@TeamDIYNow 12 сағат бұрын
The 887 has been around for years so I know its reliable. The 845 is about a year or so old so the verdict is still out, however I'm guessing it will be very similar to the 887.
@giorgipachuashvili2173 Күн бұрын
what is the weight of milwaukee bare tool?
@TeamDIYNow Күн бұрын
The Milwaukee bare drywall screw gun is 2.9 lbs. The collated attachment adds another 1 lb if added.
@jakelotter9130 2 күн бұрын
These companies are just copying Festool's CXS which has been out for over a decade.
@TeamDIYNow 2 күн бұрын
Yea I agree the Milwaukee is basically a clone of the Festool version.
@abbondanze 2 күн бұрын
In the beginning of the video you mention your dad's old saw and that the long life of that saw is reason enough to consider the same brand today. Not for me - these days, nothing is built to last like it was when your Dad's saw was new, no matter the brand. I'll bet your dad's saw was not made in China. I'll buy this saw because it's "cheap" and then it will crap out in a year or two and it'll probably end up in a land fill with a million other crapped out power tools made in China. Sad, but that's today's way versus back in the day when your dad's saw was new.
@TeamDIYNow 2 күн бұрын
Yea I agree, there isn't hardly any brand that makes things as they did 50 years ago as they have to be able to compete at a fair price. I was coming more from the fact that Skil invented the first circular saw many years ago and the brand is still around today. Milwaukee, Dewalt, etc all make the majority of their tools in China as well. The reality is we all want made in US tools, but only a fraction would pay the premium price in order to do so which forces these companies to produce in other countries.
@JA-lj9ij 3 күн бұрын
Great vid! Could you do a vid or tell me where the condenser coils are that I need to clear are located?... usually behind the front bottom grill or in the back bottom, but can't find them on this model. Thank you!
@TeamDIYNow 2 күн бұрын
Glad you liked it! Most of the coils are built into the freezer walls anymore. For this model, you should be able to remove the cover from the inside by removing a few screws. Open the door, look at the bottom in the back and remove those screws and the evaporator should be tucked behind that panel.
@originaljackofhearts 3 күн бұрын
Is there just the 1 black "o" ring on the high pressure line?
@TeamDIYNow 3 күн бұрын
Yes on the pump side there should only be 1 o-ring on the high pressure line. The return line at the pump only uses hose clamp. On the other end of those lines that goes to the power steering rack you will have an o-ring on both lines.
@italianozuzu1232 4 күн бұрын
Open them up . They need to have samsung batterys.
@TeamDIYNow 2 күн бұрын
Thanks for sharing!
@GeorgeXCIX 4 күн бұрын
Maintenance electricians best friend is the impact, hands down.
@TeamDIYNow 3 күн бұрын
Yea the impact has great balance and control for nearly every application. I find myself using both of these regularly.
@jesuscruz5097 5 күн бұрын
Here man, extra two thumbs up👍👍 for such a good and well explained video
@TeamDIYNow 4 күн бұрын
Glad you liked it! My goal in my videos is to not only show how to complete these jobs but also explain every step in detail so no one is left behind. Everyone has a different level of experience, so it has always been important to me to provide as much detail as possible. Thanks again for your comment!
@jesuscruz5097 5 күн бұрын
Well explained! Thanks once again for another great do it your self video.
@TeamDIYNow 4 күн бұрын
Glad you liked it! Thanks for watching.
@jesuscruz5097 5 күн бұрын
Thank you for this video, is certainly not difficult to replace this part!
@TeamDIYNow 4 күн бұрын
Glad you liked it! Agreed this job may seem intimidating but with a little patience it's definitely something that can be done easily.
@rubberbandman343 5 күн бұрын
Great video very descriptive thank you
@TeamDIYNow 4 күн бұрын
Glad you liked it! Thanks for watching.
@EunoiaAnrkyuk 6 күн бұрын
I've been using that Bosch now for a little over 6 months. The angle light is a gimmick, it isn't even close to 100% accurate and it isn't what I'd call active, once you get the drill to the set level it turns green, then goes out, it doesn't stay green or turn red if you go off angle. The Aux handle is NOT optional. The Kickback control is both a blessing and a pain the backside, does it work, yes, yes it does, however when you turn it off, it doesn't stay off, once you release the trigger it re-enables, which can be annoying if you are using the drill for something other than drilling a hole, such as a wire wheel or detailing brush, that said, I'd never buy another drill without it.
@TeamDIYNow 6 күн бұрын
Thanks for sharing your experience using the drill. The angle setting hasn't really been something I use, however I have wondered how accurate it would be in a real-life application.
@keithspencer1509 6 күн бұрын
I'm pretty sure using a Dewalt blade on a Milwaukee is a felony. If you're not gonna use a Milwaukee blade at least use a Diablo.
@TeamDIYNow 6 күн бұрын
Haha guess maybe I could scrape the Dewalt label off before I use again on my Milwaukee saws! Locally some of the Milwaukee 40 teeth are hard to find and these Dewalt were on sale so couldn’t pass it up.
@ZENO357 6 күн бұрын
I wanted to want this tool, but now I'm feeling like my grinders, jig saw and multitools are going to work just fine for this DIY guy. However, I can see how it would be useful to some people. Good demonstration.
@TeamDIYNow 6 күн бұрын
Glad you liked it! Thanks for watching.
@FortyTwoAnswerToEverything 7 күн бұрын
Nice, I even bought the same brand, passenger one, waiting to go in the 07 GT. Another bookmark. Oh heck, I'll just subscribe
@TeamDIYNow 6 күн бұрын
Glad you liked it. Thanks for subscribing, I greatly appreciate it!
@FortyTwoAnswerToEverything 7 күн бұрын
I can't believe how worn struts/shocks make my 07 GT feel soooo freakin' sloppy! Nice video, definitely bookmarking!
@TeamDIYNow 7 күн бұрын
Yea the GP in this video is approaching 400k and with the new struts makes it ride like a new car. Glad you liked it, thanks for watching!
@TeamDIYNow 7 күн бұрын
GM Genuine 13272000 Steering Linkage Outer Tie Rod (CXL AWD): amzn.to/4chTZHK MOOG ES800852 Steering Tie Rod End for Buick LaCrosse (CXL): amzn.to/3VMEG4k MOOG ES801169 Steering Tie Rod End for Buick LaCrosse (CXS): amzn.to/4b9VSoT GM Genuine Parts 13219141 Front Suspension Stabilizer Bar Link: amzn.to/4esshJR MOOG K750519 Suspension Stabilizer Bar Link: amzn.to/3XmTrMm GEARWRENCH 20 Pc. Ratcheting Combination Wrench SAE/Metric - 35720A-02: amzn.to/4bavICm GEARWRENCH 28 Pc. 6 Pt. Combination Wrench Set, SAE/Metric - 81923: amzn.to/3Rzzlux GEARWRENCH 44 Pc. 3/8" Drive 6 Point Standard & Deep Impact SAE/Metric Socket Set - 84916N: amzn.to/3z4qlHB
@switcharooski 7 күн бұрын
Thank you, sir
@TeamDIYNow 7 күн бұрын
Glad I was able to help. Thanks for watching!
@blt981 8 күн бұрын
Tnx
@TeamDIYNow 8 күн бұрын
Glad I was able to help. Thanks for watching.
@MyDeere3320 8 күн бұрын
Is there a reason for not filling the gear lube from the top instead of the drain plug on the bottom?
@TeamDIYNow 8 күн бұрын
The reason you need to fill from the bottom is it minimizes air bubbles that could get trapped inside which could prevent the lube from getting to the bottom of gearcase on startup. Also, if there are air bubble voids inside you risk not putting the correct amount of lube inside the gearcase. By filling from the bottom, you are slowly pushing the air bubbles out of the vent on the top.
@MyDeere3320 7 күн бұрын
@@TeamDIYNow Thanks for the explanation!
@TeamDIYNow 7 күн бұрын
@@MyDeere3320 No problem, glad I was able to help.
@brucesmithoutdoors 6 күн бұрын
From the top creates air pockets causing the unit to run dry.
@benakamyar135 9 күн бұрын
Thank so much for taking your time in making this video. It was so clear and concise. I’m your new subscriber now. I have a 2013 that I have been driving for almost 12 years now. It’s at 147000 miles now and I’m running into this issue. Thank you again
@TeamDIYNow 9 күн бұрын
Glad I was able to help. Thank you very much for subscribing! One note on the 2013 Enclave, it has the 9T75 transmission which holds roughly 5.3 quarts for the drain/refill. The 2018+ has the 9T65 transmission which is the 5.5 quarts. Make sure you measure the amount of fluid that comes out as it should roughly be the 5.3. Good luck!
@artlm2002 9 күн бұрын
Would difference in weight be a way of determining fakes?
@TeamDIYNow 9 күн бұрын
Thats a good question. I may have to do follow up video as now I'm curious as well.
@TeamDIYNow 9 күн бұрын
GM GENUINE 2134777 Engine Coolant Sensor (2007-2016 GMC Acadia, Buick Enclave, Chevy Traverse and more): amzn.to/49AYv2d
@TeamDIYNow 9 күн бұрын
Rain-X 630529 Glass Treatment Trigger, 16 fl oz - Exterior Glass Treatment to Drastically Improve Wet Weather Driving Visibility During All Weather Conditions (Pack of 2): amzn.to/3TecA0t Rain-X 800002243 Glass Treatment, 7 oz: amzn.to/49VbXyx Invisible Glass 92164 22-Ounce Premium Glass Cleaner and Window Spray for Auto and Home Provides a Streak-Free Shine on Windows: amzn.to/48sEcDq Rain-X 630035 X-Treme Clean Shower Door Cleaner: amzn.to/49weRcW
@kylebrown1866 10 күн бұрын
You spoke about replacing lines while you have the rack pinion out. Which lines are you talking about the lions they connect to the pump
@TeamDIYNow 10 күн бұрын
The lines I was referring to are the ones that connect the rack to the pump. The same pressure and return lines that connect to the power steering pump connect to the steering rack. While you have the rack out, it makes replacing these lines a lot easier and is something I typically do when replacing a rack and pinion.
@brandonm6052 10 күн бұрын
I'm getting ready to start a job in aviation airframe maintenance and I was recommended to pick up the screwdriver. That's why I'm here.
@TeamDIYNow 10 күн бұрын
The screwdriver is a great all-around drill you won't be disappointed. Good luck with the new job.
@originaljackofhearts 10 күн бұрын
Do you bleed the air with the motor running or off?
@TeamDIYNow 10 күн бұрын
Front wheels off the ground and the motor off.
@shadow-wulf 11 күн бұрын
excellent comparison, it was exactly what i wanted to seed and hear. thanks very much for your time and effort to do this post.
@TeamDIYNow 11 күн бұрын
Glad I was able to help! Thanks for watching!
@jmark1298 12 күн бұрын
One big thing you are not taking into consideration here- you will get many, many more full charges with the powerstack over other and also, as the battery power is drained, the powerstack with hold it's power output consistently until almost completely drained whereas the other type will steadily lose more and more power until dead.
@TeamDIYNow 12 күн бұрын
Yea you're right I should have mentioned as that is something to consider when comparing these batteries. I know I talked about that in one of my other powerstack videos but failed to mention here. Thanks for the comment.
@AngPontello 12 күн бұрын
Been searching online for a couple hours. Love to do this project, but sadly unable to find the seat covers for a 2007 Buick Lucerne CXL.. Great video tho!
@TeamDIYNow 12 күн бұрын
Glad you liked it! Which version you need (color, heated or cooled)? I do see a few of the black for the drivers side and handful of the passenger covers. Let me know and I will see what I can find.
@AngPontello 11 күн бұрын
@@TeamDIYNow wow, thanks for responding, not expecting that.. for my 2007 Lucerne, Seats are Heated not cooled. The color is the same as video, Biege Sandy color? Drivers side.. besides the seat cover, i'm looking for the back cover as well for drivers side. Any info you can provide is greatly appreciated. Thanks again.
@TeamDIYNow 10 күн бұрын
@@AngPontello No problem glad to help. I'm not sure if you have the Cashmere or Coco/Shale color as they look very similar. It appears maybe the V8 has the Shale color but can't confirm. I do see the cooled and heated cashmere (19169448 RPO KA1) available on ebay, however the heated only doesn't appear to be available for the Cashemere but it is on ebay for the Shale (25986753). Go to this GM parts site once and put in your VIN to see if will narrow down the exact part number you need and we can go from there: www.gmpartsgiant.com/parts-list/2007-buick-lucerne/interior_trim_front_seat_trim_seat_belts/seat_assembly_driver_back.html?
@AngPontello 10 күн бұрын
@@TeamDIYNow Thanks again. According to my vin.. at GMparts giant. Drivers side: bottom seat is : 15276510 COVER, DRIVER SEAT CUSHION(SHALE) The Driver seat reclining is : 15216160 COVER, DRIVER SEAT RECLINING FINISH(INCLUDES 4) And is states Shale...
@TeamDIYNow 10 күн бұрын
@@AngPontello Unfortunately, looks like those part numbers aren't available anywhere including ebay. Maybe one last thing you can try is to get used one...this is site that helps located used part numbers: car-part.com/ . Good luck...sorry I wasn't able to locate one for you.
@user-fb4si1ug4l 12 күн бұрын
did you say that there is a 1/4in drive craftsman torque wrench?? what is the # for that
@TeamDIYNow 12 күн бұрын
I thought there was a year ago when I did video, however when I go out and look now I don't see an available 1/4 either. I have used this Tekton one for about 10 years and works good as well: amzn.to/3z4bI6Y
@houseofstylz 13 күн бұрын
Nice vid…where’s it made?
@TeamDIYNow 13 күн бұрын
Glad you liked it! This scaffold is made in China.
@CheapCheerful 14 күн бұрын
Very helpful video, thank you. Currently in Thailand really enjoying Lazada online shopping with fast delivery, and genuine Dewalt tools here are ~20-30% cheaper than at home. However the fakes are EVERYWHERE. Generally you can tell simply by the price, but not always, so this was a helpful video. Also, it's often not the IT Departments fault when "IT" problems like the QR codes being useless happens. Unfortunately most IT teams are under the control of the Finance department, and you know what that means! Rule by accountants, dumb decisions everywhere. Then there's the general business users who love to corrupt data, not follow basic instructions, and end up screwing up the data so its no longer reliable (as I suspect has happened with DeWalt's QR system). Eitherway, take care, and thank you.
@TeamDIYNow 13 күн бұрын
Glad you liked it! You're right, probably not fair for me to blame it on the IT dept as hard telling where the process broke down. Hopefully they get it resolved, as I feel like these QR codes could be used somehow in the future to easily spot genuine vs fake (just like watermarks are on legit dollar bills). Thanks for watching!
@mortishyn6664 14 күн бұрын
Hi is there option to switch bluetooth complitly in tools or bosch radio.
@TeamDIYNow 13 күн бұрын
On the radio, it will not broadcast bluetooth if the source is not on bluetooth. When its on AM/FM or AUX, the bluetooth will not broadcast/connect to any devices. On the tools, if you get a connected tool (bluetooth built in) I dont believe there is a way to turn off the bluetooth. For connected ready tools that require you to purchase the optional bluetooth module...you can turn off by not installing the module.
@TeamDIYNow 14 күн бұрын
Permatex 24125 Ceramic Extreme Brake Parts Lubricant, 8 oz., Pack of 1: amzn.to/3vORGvY CRC BRAKLEEN Brake Parts Cleaner (05089): amzn.to/3woIX3Q OTC 7317A Disc Park Brake Caliper Tool Kit: amzn.to/3RrjHBp GM GENUINE 1771224 Rear Brake Rotors: www.rockauto.com/en/moreinfo.php?pk=8327720&cc=3438692&pt=1896&jsn=275 GM GENUINE 84769879 Rear Brake Pads: www.rockauto.com/en/moreinfo.php?pk=11530880&cc=3438692&pt=1684&jsn=273 How to Fix 2018-2019 Buick Enclave & Chevy Traverse Rear Brake Squeal (GM TSB 19-NA-115): static.nhtsa.gov/odi/tsbs/2019/MC-10165100-9999.pdf
@oldowl4290 14 күн бұрын
I'd like to see this compared to the 15amp Craftsman corded saw (on sale for $69). While $30 more, it has a much better footplate made of ribbed magnesium. I had a Skil Mag 77 worm drive (circa 200 model) and it's one drawback was the crap plate which bent over time. You'll notice any high end saw now has a ribbed plate. It's simply better in the long run. Even my cordless 20v Hercules has it (oddly their $99 corded doesn't which is why I'm buying the Craftsman).
@TeamDIYNow 14 күн бұрын
Yea I agree the magnesium construction is definitely the better option, but it usually comes at a cost. I will have to check out that Craftsman saw as I'm not familiar with that specific model.
@mortishyn6664 14 күн бұрын
Hi Is it possible to block bluetooth on this radio ?
@TeamDIYNow 14 күн бұрын
The bluetooth will only connect to devices when the source is on bluetooth. If the source is on FM/AM or AUX, it doesn't broadcast the bluetooth signal, so it won't connect to any devices.
@NathanSmith-ut4ur 14 күн бұрын
This detailed review was helpful. Thank you
@TeamDIYNow 14 күн бұрын
Glad I was able to help! Thanks for watching.
@barkers0609 15 күн бұрын
I’m 69 years old and never in my life have I changed that in any vehicle I’ve owned. Never knew it was there! Weird!! Thanks for the info!
@TeamDIYNow 15 күн бұрын
Glad I was able to help! It's definitely something that is often overlooked since its hidden in the dash. Typically, when the cabin air filter needs replaced you will either smell a musty smell in car or will notice less air flow coming out of air vents as the filter is plugged.
@360escapades 16 күн бұрын
Do u have to pump or bleed the brakes or anything ?
@TeamDIYNow 16 күн бұрын
The only time you need to bleed the brakes is if you change brake calipers or disconnect a brake hose as that allows air to get into the system. When your done changing the rotors/pads and the vehicle is lowered back to the ground...all you need to do is press the brake pedal 1-2 times and the pedal will firm up and you are done.
@fifthamendment1 16 күн бұрын
I do not know which model I have, but I HATED it. There is an order as to which leg folds up first, and 50% of the time I got it folder in the wrong order. You have to make sure the feet are in the correct orientation to get the legs to fold up. If the sawhorse is on its side, the feet will not orient properly. They are not very durable. If you open the legs too far apart, the metal would bend. The only benefit is that they are compact when folded up. In a nutshell, I hated folding it up and they do not seem very durable. When I am on the job site, I don’t want to focus on the sawhorse. Regret wasting my money on it.
@TeamDIYNow 16 күн бұрын
Yea it took me some time to get use to which leg needs to get folded up first and which one opened up first. On the one I have it shows a label pointing to which leg to open 1st, open 2nd which helps. There are some give and takes for sure to have the convenience of being able to collapse when done.
@TruthLiesAmerica 16 күн бұрын
Pontiac people. 97 GTP blew up. Now 99 gonna be GTP when I change over the supercharger. KZfaq helped me with the AC compressor and you with the power steering. I'm a 35-year carpenter. Not a mechanic. But I did it. Thank you.
@TeamDIYNow 16 күн бұрын
Glad I was able to help, good job on the repair! I'm a Pontiac guy as well, my first car in high school was a 93 GP with the 3.4 DOHC. What I would do to have that car today!
@TruthLiesAmerica 8 күн бұрын
I'm trying to replace the high pressure hose. Have any tips on get that loose on other side. I finally got up in there and broke it loose. Going to buy a set of crowsfoot this morning. That's a tight space. I can't feel my hands this morning.
@TeamDIYNow 8 күн бұрын
@@TruthLiesAmerica Yea it's a tight fit for sure in there. Crowsfoot to break loose and stubby wrench is going to be your best bet. Here are a few stubby wrench sets that I have had for many years ( amzn.to/45y9F7x or amzn.to/4emiRzE ). Good luck!
@TruthLiesAmerica 8 күн бұрын
Thank you. Have a 18mm cF on the way. I have any carpentry too anyone needs. Just basic mechanics tool.
@TeamDIYNow 8 күн бұрын
@@TruthLiesAmerica Glad I was able to help. Good luck.
@user-ne5vg1dv9c 16 күн бұрын
I have a Monte2003 Chevy Monte Carlo ss and this has been the best video yet surprisingly the Monte Carlo videos on this suck
@TeamDIYNow 16 күн бұрын
Glad you liked it! Thanks for watching.
@JColeOG 11 күн бұрын
Got a 01 Monte ss and gotta replace it all the videos suck for us lol 😂
@sunnydays4966 17 күн бұрын
Amazon begging for class action lawsuit. There need disallow this
@TeamDIYNow 17 күн бұрын
This is why I always tell people the importance of shipped and sold by Amz as those are the only items that are actually sold by Amz. All the other items that are still prime but sold by a 3rd party are a wildcard unless you recognize the name (Grainger, etc). In the legal disclaimer they talk about when the ownership is Amz (sold by Amz) and when its the 3rd party seller who takes responsibility. Amazon prime just means they take ownership of the delivery. This isn't just a tool thing either, there are so many counterfeit items out there in every single industry its getting ridiculous.
@KLondike5 17 күн бұрын
The website didn't reject the counterfeit numbers that I entered from my purchase.
@TeamDIYNow 17 күн бұрын
What makes you feel that you have a counterfeit battery? Dewalts warranty process sometimes requires a receipt from an authorized seller and other times just the serial/date code they will honor warranty. The counterfeit batteries that don't have a valid serial/date code are for sure going to be rejected by Dewalt. However, if you happen to get a counterfeit that also has a legit serial/date code printed and it passes Dewalts serial number check through customer service then you may have a good chance it will be protected by Dewalts warranty.
@KLondike5 17 күн бұрын
@@TeamDIYNow Maybe they figured out the algorithm for generating valid codes. That's been common with software. Project Farm also noted his fakes were accepted by the website. It's possible the DeWalt website is just taking the numbers to track even if they're not legit. I didn't know it at the time but obviously the price I paid for my batteries makes it impossible for them to be genuine. They both have generic named cells in them. One was a better fake by having the proper security screws and plating a couple terminals so that they look like fully copper. But It appears newer DeWalt batteries don't necessarily have the copper terminals anymore. But I only entered it via the QR scan. It is a legit DeWalt site but I didn't try the "add a tool" in the personal profile. section.
@TeamDIYNow 16 күн бұрын
@@KLondike5 Yea I don't think the copper terminals or the security torx is something we can rely on anymore. All genuine Powerstacks come with standard torx. In addition, some XR 5.0 batteries have regular torx as well. I have 5 XR batteries all purchased from Lowes in the last 5 years and some have the security torx and others don't. If you go to your local HD or Lowes, check some on the shelf some have some dont. Im not sure about the QR scan as none of the batteries use to work via the QR the last time I checked (just checked now and mine still dont). The tool QR codes always took you right to the specs but for me the batteries never did.