14 күн бұрын
21 күн бұрын
2 ай бұрын
2 ай бұрын
Пікірлер
@Erkkremlinklum Сағат бұрын
This shit took me 3hrs 😂
@steevegmtech7326 Сағат бұрын
How 🤣🤣
@Erkkremlinklum 44 минут бұрын
@@steevegmtech7326 idk guess I’m retarded lol but yeah the one bolt for the caliper was balls tight and had to take it all apart and move everything to the side to get an impact on it and then a ton of tension was on the strut so had to take more apart to relieve the tension. Yeah good time s
@JustDontBeThatGuy 4 сағат бұрын
What a bunch of psychopaths ...... why tf would they do this
@steevegmtech7326 3 сағат бұрын
I feel you man
@ExtinctInsanity 5 сағат бұрын
Never take your vehicle to the dealer to get worked on. Way overpriced.
@steevegmtech7326 5 сағат бұрын
Well that's very reason why this one is in my bay , he attempted to replace brake line and front brakes, he ended up frying his brake module , it set a hard fault he ended up spending $2,500 to fix it
@AlphadogFJB 7 сағат бұрын
U can put it in break service mode no scan tool needed
@steevegmtech7326 6 сағат бұрын
I posted a video months later about that
@JulesDetailingServices 22 сағат бұрын
How did you have to break these in? Or are they good to use as soon as they're installed?
@steevegmtech7326 17 сағат бұрын
No break in is necessary for the OEM They are good once you installed them
@Paulinerasmo Күн бұрын
Man I sell Chevys and this no sound thing is always a problem!
@Paulinerasmo Күн бұрын
Was this a permanent solution?
@steevegmtech7326 Күн бұрын
It was due to faulty wireless charger
@vipserious 2 күн бұрын
What is part number? 😢
@dominickfrancois7944 3 күн бұрын
I looked. Couldn’t find any loose wires. Anywhere in particular? Can the passenger side be the culprit?
@steevegmtech7326 3 күн бұрын
Did you scan the vehicle for code? If so what is it
@dominickfrancois7944 3 күн бұрын
@@steevegmtech7326 I don't think my Scanner (Foxwell NT-301) is picking it up. I will check with another scanner shortly.
@steevegmtech7326 3 күн бұрын
@dominickfrancois7944 ok let me know what you get
@scottdunahoo 4 күн бұрын
Great video. Thank you. That car is disgusting. All that hair and funk
@jorgepulidovaladez9418 4 күн бұрын
What’s the issue on most trucks? Mines in the shop for same reason
@steevegmtech7326 4 күн бұрын
That's not a common issue on those traverse, that was mouse damage
@joshuafields497 4 күн бұрын
Thank you! Best version I’ve seen for this job.
@steevegmtech7326 4 күн бұрын
You welcome and thanks for the support 👍
@johntragis2040 6 күн бұрын
Did the rotors get replaced or just painted? Great video and to the point. Thank you!
@steevegmtech7326 6 күн бұрын
It was replaced, it has a layer of rust protection that's why it is gray ish
@steevegmtech7326 6 күн бұрын
You welcome
@paigehampton8774 6 күн бұрын
What about on a 2019 Suburban with cloth seats? I don’t have this button on the driver’s seat.
@steevegmtech7326 5 күн бұрын
It is different for the 19 suburban
@marcosrios264 6 күн бұрын
Is that a 2 ton jack? Thanks for making this video
@steevegmtech7326 6 күн бұрын
Yes it is, you welcome 👍
@UrielRamirez-rg6di 6 күн бұрын
Would this process be the same for a 2022 canyon?
@steevegmtech7326 6 күн бұрын
No it is different setup
@UrielRamirez-rg6di 6 күн бұрын
@@steevegmtech7326 thank you for the response! Great video by the way! S/o from cali
@jonnychamuko 6 күн бұрын
where you get caps for the lines to not leak ? is it more easy to drain the oil and filter for less oil leak? thank you!
@steevegmtech7326 5 күн бұрын
You welcome, that just cap i saved from previous job when the new parts comes in
@jonnychamuko 5 күн бұрын
would it be best to drain all oil first?
@steevegmtech7326 5 күн бұрын
Not necessary at all
@AC-yp1yv 7 күн бұрын
This is not a DIY
@NickBEADG 7 күн бұрын
Wow so many unnecessary steps. Don't do anything from the top.
@steevegmtech7326 7 күн бұрын
It is easier for the diyer
@hauntedgunterhotel 8 күн бұрын
Well done!!!
@steevegmtech7326 8 күн бұрын
Thanks 👍
@dand3975 9 күн бұрын
Oh come on Steve it ain't that bad. imagine you had to work on an old rusty K20 Chev with drum brakes & a full floater axle, Rusty, leaking wheel cylinders, needed to be replaced, then the steel brake lines we're Rusty and needed to be replaced on the frame to the cab mounts. To top it off the master cylinder needs to be replaced cause it would not hold pressure. Cheer up there Steve, maybe the new cars aren't so bad.
@zv1975 9 күн бұрын
Hi Sir, what are the torques to tighten up Rotors and calipers?
@jerryrfields 9 күн бұрын
Your English is so bad, I did not learn anything. Thumbs down. Quit you tube
@TheLeek94 9 күн бұрын
😅
@teh5408show 9 күн бұрын
Wow, they had been wearing down the metal for a WHILE
@steevegmtech7326 9 күн бұрын
Oh yes, she came in for a rattling noise
@fabiangonzalezgarcia8772 10 күн бұрын
Thank you great explanation and process 💯😊!
@steevegmtech7326 9 күн бұрын
You welcome 👍 and thanks for watching
@steevegmtech7326 10 күн бұрын
Link for ac compressor www.amazon.com/dp/B07J9YW41X/?tag=steevegmtec03-20 Basic hand tool set www.amazon.com/gp/aw/d/B08XPBR9JD/ref=ox_sc_saved_image_1?smid=A1F0H6W3XGIV8J&psc=1&tag=steevegmtec03-20 Trim tool set www.amazon.com/dp/B0BLCDRDY6/?tag=steevegmtec03-20
@IsmanuelEnriquez 10 күн бұрын
I need to do exactly that job
@IsmanuelEnriquez 10 күн бұрын
Where do you live?
@hloyd3774 10 күн бұрын
Did you fix it
@steevegmtech7326 10 күн бұрын
Yes
@ADom-zh7tu 10 күн бұрын
Did you replace the valver cover because it was leaking oil? Or both the cover and gasket?
@steevegmtech7326 10 күн бұрын
Yes it was leaking oil on the exhaust
@ADom-zh7tu 10 күн бұрын
Whoa....I can't believe you replied. Thank you
@ADom-zh7tu 10 күн бұрын
That earns subscribe thanks alot. Is there a specific torque sequence and torque specs if you don't mind sharing that
@mrvang8077 11 күн бұрын
How many mile was on that vehicle before you had to replace that alterntor, Brother?
@steevegmtech7326 11 күн бұрын
About 90k miles not uncommon
@rolando2742 11 күн бұрын
Hello Steeve, how many miles has that Trailblazer? I heard that this model has a wet timing belt and I would like to know if it is reliable in the long term, for example 90,000 miles. Thanks in advance.
@papabits5721 12 күн бұрын
You must work for a dealer, this is why we watch vids so we don't have to go to the dealer, and get bill 150 $ for sman tool use.
@steevegmtech7326 12 күн бұрын
👌👍
@Cbrullo 12 күн бұрын
where can I find this procedure online? can you link?
@steevegmtech7326 12 күн бұрын
link for the sunroof calibration kzfaq.info/get/bejne/nJhzo5Cdnc2nqn0.html
@Cbrullo 12 күн бұрын
@@steevegmtech7326 The website that has step by step?
@steevegmtech7326 12 күн бұрын
Rear brakes www.amazon.com/dp/B08WJPQB78/?tag=steevegmtec03-20 Scan tool used www.amazon.com/gp/aw/d/B0C3GJTD45?psc=1&tag=steevegmtec03-20 impact driver amzn.to/4ejhhyB Basic hand tool set www.amazon.com/gp/aw/d/B08XPBR9JD/ref=ox_sc_act_image_1?smid=A1F0H6W3XGIV8J&psc=1&tag=steevegmtec03-20 Caliper compressing tool www.amazon.com/gp/aw/d/B086H2R1B5/ref=ox_sc_act_image_1?smid=AS1QLBO8QPN9Z&psc=1&tag=steevegmtec03-20 Brake cleaner www.amazon.com/dp/B01CS5S2O0/?tag=steevegmtec03-20 Hammer www.amazon.com/gp/aw/d/B08QTYHL9W/ref=ox_sc_saved_image_9?smid=ATVPDKIKX0DER&psc=1&tag=steevegmtec03-20
@Cbrullo 13 күн бұрын
If i replace the sunshade motor and the sunroof Motor and it still don't work, do I then replace the control module and does that need programing? Can you link me the parts also? 2019 equinox.
@steevegmtech7326 13 күн бұрын
If you replace both ,it is still not working, something is wrong you need further diagnostic also those sunroof and sunshade motor are modules themselves just calibrate it by watching my video
@steevegmtech7326 13 күн бұрын
Sunroof motor www.quirkparts.com/oem-parts/gm-oem-new-18-20-chevrolet-gmc-equinox-terrain-denali-sunroof-window-motor-84606456-84606456 www.quirkparts.com/oem-parts/gm-rear-sunroof-sunshade-motor-with-control-module-84287215
@steevegmtech7326 13 күн бұрын
Calibration procedure kzfaq.info/get/bejne/nJhzo5Cdnc2nqn0.htmlsi=leAcS3NNNe08hhP7
@Cbrullo 12 күн бұрын
@@steevegmtech7326 dealership tried re calibrating, didnt work .in the report it it says to replace both motors and if that dont work replace control module.
@Cbrullo 12 күн бұрын
@@steevegmtech7326 TECHNICIAN WAS ABLE TO VERIFY AND DUPLICATE CUSTOMER CONCERN, SUNSHADE MOVES SLIGHTLY THEN GOES BACK TO ORIGINAL POSITION. TECHNICIAN SCANNED FOR CODES, CODE B369D PRESENT IN BCM, SUNSHADE CALIBRATION NOT LEARNED. TECHNICIAN FOLLOWED INSTRUCTIONS TO CALIBRATE SUNSHADE AND SUN ROOF, BUT CALIBRATION FAILED. MALFUNCTION IN SUNSHADE MOTOR NOT ALLOWING SUN ROOF TO OPEN. INTERNAL MALFUNCTION IN SUNROOF CONTROL MODULE. FROM SI: (IF DTC B369D 42 OR DTC B369D 4B SETS, REPLACE THE K62 SUNROOF SUNSHADE MOTOR MODULE. IF DTC B369D 42 OR DTC B369D 4B SETS AGAIN, REPLACE THE K61 SUNROOF CONTROL MODULE.)
@t94zskss47 13 күн бұрын
I wanted to take my throttle body off my 2011 Silverado 5.3 to clean it but I had read you needed a scanner to make the system relearn it that’s why I haven’t took it off. I see on your video you said to follow them steps if you don’t have the scanner programmer machine so I’m have to take it off and clean it now and see if it works
@Roofing60 13 күн бұрын
I change my break and rotors in my chevy colorado 2018 watching your videos. man those front breaks are hard to slide in it keep grabbing on to the rubber of the pistons so I slide a thin card till I got the break pads In.
@christophertorres9568 13 күн бұрын
How many miles did the car have when you did the brake job
@steevegmtech7326 11 күн бұрын
60k miles
@gerardosoto9222 14 күн бұрын
Do I still need to put this the car in brake service mode for front brakes only or just back brakes?
@steevegmtech7326 14 күн бұрын
No just the rear
@Avtodos 14 күн бұрын
Hello! Please how to disable this mode on Cadillac SRX 2014? This method does not work(((
@tw0521 14 күн бұрын
Also can you show how you removed that cover
@tw0521 14 күн бұрын
What is that piece called?
@forerunner1246 15 күн бұрын
Thanks for the help
@steevegmtech7326 15 күн бұрын
You welcome 👍
@blakewilson3062 15 күн бұрын
The parts you put in the comments section, will they work for the LT model as well or are they a different part number ?
@steevegmtech7326 15 күн бұрын
Yes it is the same part number per the bulletin
@steevegmtech7326 15 күн бұрын
Link for the repair kzfaq.info/get/bejne/iNyirM2J39TMfZc.html
@dxsslyv7690 15 күн бұрын
I sent you an email. The question is about the Chevrolet Equinox.
@steevegmtech7326 15 күн бұрын
Hey i sent you the instructions
@BeABereanActs1711 16 күн бұрын
Are the paperclip looking brackets necessary?
@steevegmtech7326 16 күн бұрын
Of course they are,otherwise your brake will wear out prematurely
@BeABereanActs1711 15 күн бұрын
@@steevegmtech7326 thank you!
@BeABereanActs1711 15 күн бұрын
@@steevegmtech7326 any advice on how to get them to stay in place? My new pads did not come with new springs and the old ones come off after a few days of driving. I’ve ordered new ones and will try that. Is there anything you can think of that may help them stay put?
@auburnspeedacademy 17 күн бұрын
I’ve done this a few times and never considered taking out the stud. That step alone will save a you a lot of time and energy.
@carllos7796 17 күн бұрын
What is the brand of the programming tool?
@steevegmtech7326 17 күн бұрын
Launch x431 www.amazon.com/gp/aw/d/B09XV8VR35/ref=ox_sc_act_image_10?smid=A3F2UU8IZ3AFBC&psc=1&tag=steevegmtec03-20
@carllos7796 17 күн бұрын
@@steevegmtech7326 Also, do you have to reprogram anything after you installed the brakes or just at the beginning of the whole process?
@steevegmtech7326 17 күн бұрын
All you do is put the rear brake in service mode before replacement of the pads and rotors when you done you take it out of service mode or we called calibration