Hey man great video I gotta question my truck has power locks do I still have too replace the bcm still

How do i re learn a key fob for it to work.. for instance i have an old set of a truck i use to own can i use that or dose the bcm and key fob have to be from same truck

So you ran all brand new harness to the doors to the BCM without running the orange cable and brown just plug and play ?

Did you get a air bag light after the bcm swap?

I so wish you were my neighbor. I just bought a Kia and no power windows or door locks and I have to say, I am used to having those and they are super nice to have. You've figured a way how to fix these vehicles and add the "bells and whistles" to them. I wondered if all 2013 Kia Rio's have the same body control modules but the factory just leaves off the wiring harness for the electric doors and locks. You're making me wonder and ponder over here.

I have a 05 Yukon 1500. Parasite draw. Battery dies in a few hours. It really is different every time. I have noticed that my unlock on my driver's door play only works sometimes. I am unable to locate the door lock relays and fuse. I've read the manual I've been on other KZfaqs.

Will this work for 99-02???

Hey man your videos really helped me I just have one question did you get the service airbag message after you replaced your bcm I just finally finished the whole power window and power locks conversion but I ran into that problem after I programmed the bcm

Thanks. I got everything working. Only issue is my stick radio locked

Did you get a airbag light after installing the bcm?

Might just be my ocd but I did this on my truck but the lights only flash when I lock it not when I unlock it not a big deal but if you know what I did wrong lmk😂

Thanks for sharing! The BCM is one of the most frustrating things they have ever done. I had trouble with my door locks and found that the aftermarket remote start and alarm system my son had someone put in had gone bad and was running the battery down and causing false alarms always. I took out the aftermarket stuff and then found that the BCM was either effected by the remote start or it had gone bad by itself. I bought a new BCM and then had to have a local shop program it and things have never been right since. The under dash and courtesy lights in the doors and the dome light don't work. I refuse to go back and pay for more programing when that should be something the owner should be able to do!

Thanks bro !

Hey man can u tell me the exact wiring diagram if u do t mind it would help me a lot

I’m wondering why my horn doesn’t go off when I lock my truck I’ve done everything step by step

Does the BCM have to come from a single cab truck???

Hey bro I just did the conversion on my 04 single cab. How do I remove the air bag light and the “service airbag” message? The bcm i used came off a single cab 03-06

Eeerngggg😂😂😂😂

the power locks dont need to be from the same truck that had power locks? or do you need to pull a bcm and power locks from same truck?

Having an issue after swapping my BCM out. Installed, went to turn key truck started right up. Cut off, now it won’t start? Can’t get it to reset like you said?

hey man after months i finally did what you said and it came out great the only thing is i can’t get it into the key fob learn mode since the lock should be getting power while it’s off

how do you connect the key fob since to do it the locks must work when the keys off

The door lock relays are for crew cabs (4 doors). 2 door trucks don't use relays for the door locks. Your videos came in very useful for me. Thank you.

Does the power windows work after this?

Thank you your instructions were spot on . I have electric windows and door locks now . I followed all your videos and after going to the junkyard a few times it all works great

He talk toooo much about nothing

Can you put 99-02 power doors on 03-06 for the conversion?

i was debating on just replacing my doors completely. I have an 2006 wt 1500 extended cab im going to replace all four dours i want power front . So i will need to take the controll modual from the doner truck along with the doors . Do i still have to add the orange constsnt power to both doors or will it work when i replace the modual without the orange wires

Did you have any problems with interior lights not coming on when the door is open after swapping bcm?

Very useful

I did this and it all works but My airbag light turned on with B1001 code. Know anything about this?

What do you mean by under the driver seat airbag needs re wiring?

I cheated mine and instead of tapping into the thick red wire I tapped into the fuse box on the side where it has power. Only thing is idk how to get the locks to work when truck is off.

How did you hook up the bose system?

Good video, I have purchased a 03 sierra from you before and still driving you do great work

Did everything how u did it now the truck turns on and the power locks and windows don’t work what can that be

I’ve been trying this swap with no luck I have a donor truck and I verified everything worked before I removed them. Everting works on the passenger side including the key fob from the donor but it seems the DDM on the base truck won’t turn on I probed the B12 wire on the BCM and it gets a pulsating signal so I went back to the base BCM just to see if I could get windows only but same issue just the pass window works and same signal from the b12 wire. Do you think this is a ground issue somewhere else they all seem intact. Light green b12 is hooked up as you showed to the dark brown at the door. Awesome info Btw good job.

Bro you’re amazing!!!!! The only issue with mine is that is says “service air bag” any ideas on how to fix that?

Hey buddy still have problem getting the passenger window to work! How can I contact you? Thanks

I'd like to see how ya did the roof console

I’m currently doing this got a wreck single cab Silverado with power windows and locks. Everything is installed but the driver side don’t go down or lock a work but passenger side works. change bcm and all the harness and the whole dash harness of the donor security light comes on but at times

You can Share your email or phone i have 06 Silverado already install all but doesn’t work I need your help

Hey @3rd's Auto Advise and tips can you help me out. so I did this swap about month and a half ago and it’s been working excellently. I was also able to program a aftermarket key fob from boost auto parts the 2014-2018 style fob. Anyway the only issue I have is the service air bag light comes on and stays on I always have to reset the message display so I can see my mileage. What might cause this to happen and how can I get the air bag system to work normal?

So I just completed this on a 2005 Silverado WT 2500HD i recently bought added all the power components, wiring harnesses then a BCM everything is working like it should windows, locks, power mirrors and keyless entry! this is an awesome video!!!! I used a BCM from a 2005 tahoe works fine just getting a message "replace lifegate fuse" going to see if i can turn that off with HPtuners if not probably get a truck BCM thanks for posting this I loved the truck but was really missing the keyless and power windows. I installed everything and tried it with out swapping the BCM everything was working but the locks and windows was working with no key in the truck after the 30 minute BCM programing everything worked correctly!!! very happy thanks again!

What size wire did you use to run power from divers to passenger side ?

So once I change the bcm and do the power windows and locks as you showed before, the power mirrors should work ?

Bro does this work on 99-02? Im currently manual. Fuckn hate it. People be asking me about my truck but i cant hear shit cuz i cant roll down passenger window 🤣

I have a 4x4 truck, if I get a 2wd BCM with power locks / power windows, will it still work ?

Can you tell me what is the color wire from driver side harness for turn signals