Will this kill car battery while plugged in and car is off?
@DaveBudness9 сағат бұрын
@@cdm8090 why would it? It’s not on
@cdm80908 сағат бұрын
It remains lit so I wasn’t sure
@DaveBudness8 сағат бұрын
@@cdm8090 yup
@Lily-bw6of22 сағат бұрын
Is this a good desk? Is it a good material? I Have Been thinking to buy The pink version
@DaveBudness20 сағат бұрын
Hello. Thanks for checking this vid out. I love the desk. I will say I don't use the LED lights, I do love the extra plug in outlets on top of the desk though. Helps out. I'd get this desk again. I was hoping to put my desktop underneath it, but it's to tall. I'd like to get a printer sometime, and that will go right on top next to my desktop tower as you can see in the images. Also, I don't use the cup holder that came with it along with the headset holder. I have one already. I had an ice coffee from Dunkin the other day and it started to melt and there was some water on the desk, which wiped off easily. Didn't leave a mark as well. I will say do a little research as far as the monitor goes, as you can tell by the image, I had to pull my desk from the wall just to make the monitor stand fit, and sit well. You can always use like one of those monitor arms. It's like a vice machine type thing that you just place on top of the desk and then you can attach your monitor to it. Or better yet attach the monitor to the wall if you are able to. But I think getting a monitor arm is the best route. The top of the desk is rather small. postimg.cc/gallery/XbLsGG4 But I think it all depends on the size of the desk you'd like to get. I could be wrong. Material isn't bad for being made in China. I will say don't screw to hard cause you'll end up messing up like I did. This is how gangster I 'am. Bullet Hole! postimg.cc/gallery/Q7nVJpg Here's a link to the images I just took for you. postimg.cc/gallery/gPS16Zg Thanks -Dave
@Nintendo208164 күн бұрын
I download the games as vpk but if I open it says error or something
@DaveBudness4 күн бұрын
@@Nintendo20816 did you find the data files?
@theaverageteleporter74358 күн бұрын
Thanks a lot it worked well.
@DaveBudness8 күн бұрын
@@theaverageteleporter7435 honestly I’m shocked it works still. It’s a two year old video. And times have changed
@user-vd5vv1vt5y12 күн бұрын
Thank you dude I was getting mad for it not working until i found this video ❤
@DaveBudness12 күн бұрын
shocked it still works, its so old
@james621612 күн бұрын
How did you get your psp to read the card without read without reformatting it?
@DaveBudness12 күн бұрын
@@james6216 don’t remember
@PretendingToListen16 күн бұрын
i know this is old, but does that mean the trimmed file is now useable on things like s(teamdeck)witch ?
@DaveBudness16 күн бұрын
I don't see why it wouldn't be? Why do you think that?
@BYELUCKS16 күн бұрын
The spacers on the toe arm bolt do you use all of those? Do they go under the toe arm or above it?
@DaveBudness16 күн бұрын
I don't even remember. My friend did this for me.
@ΜαριαΑλευρομαγειρα19 күн бұрын
What psp is it
@DaveBudness16 күн бұрын
Good question, I don't even recall.
@ΜαριαΑλευρομαγειρα16 күн бұрын
@@DaveBudness what psp is it is it a e1004 a 2000
@NinjaxWizardGoVroom19 күн бұрын
My game dump says file type as xc1 for both parts ( two parts total) do I need to rename them to .xc0 and .xc1? Cause as of now when I try to merge the two it doesn’t work because they have the same file name type xc1 and it’s like merge what dude???? It’s already merged. When I dumped them it split Kirby into two parts part 1 and part 2 and can’t merge because file type is xc1 for both. I noticed yours is xc0 and xc1. Any suggestions?
My game dump says file type as xc1 for both parts ( two parts total) do I need to rename them to .xc0 and .xc1? Cause as of now when I try to merge the two it doesn’t work because they have the same file name type xc1 and it’s like merge what dude???? It’s already merged. When I dumped them it split Kirby into two parts part 1 and part 2 and can’t merge because file type is xc1 for both. I noticed yours is xc0 and xc1. Any suggestions?
@DaveBudness19 күн бұрын
@@NinjaxWizardGoVroom use DBI they meaning .XCI comes in one file instead of nxdumptool splitting them up. I stopped using nxdumptool. It’s cool but the. You gotta fuse the split files.
@NinjaxWizardGoVroom19 күн бұрын
Thanks dude I’ll try that I was helping someone on Reddit with setting up pcsx2 they had a good pc but couldn’t run pcsx2 for some reason. Got it sorted but took two hours. I don’t even know the dude but know pcsx2 pretty well. Gotta help the emulation community where ya can kinda like you and this video. Thanks again dude
@DaveBudness19 күн бұрын
@@NinjaxWizardGoVroom so did you use that program? how did you end up working it out
@Fizzy1_22 күн бұрын
Error kubridge.skprx is not installed
@DaveBudness22 күн бұрын
@@Fizzy1_ go get it installed.
@airskoden237825 күн бұрын
Matter what vehicle you’re in when he uses device?
@DaveBudness16 күн бұрын
Don't see why not.
@chaazmadeit686125 күн бұрын
You spend more time showing your setup and talking about nonsense than actually walking through setup
@DaveBudness25 күн бұрын
@@chaazmadeit6861 alright
@Jakemp3-w9u26 күн бұрын
OMG IT WORKS
@DaveBudness25 күн бұрын
@@Jakemp3-w9u glad it still works it’s so old
@missjewel727327 күн бұрын
Can you do this without an adaptor and just connect the psp to the computer with a cord?
@DaveBudness27 күн бұрын
@@missjewel7273 I’m unsure.
@KoRupT_28 күн бұрын
I had issues with not being able to see the custom themes, only the ptf ones worked. I added the SRC folder to the SEPlugins folder (along with cxmb) and now they work. Thanks for the video and I hope this also might help someone too.
@DaveBudness28 күн бұрын
@@KoRupT_ you had to turn them off and on right?
@KoRupT_28 күн бұрын
@@DaveBudness at first in the recovery menu it only showed “VSH” and that’s all I could enable. But all I had to was just copy and paste the 2 folders “cxmb and SRC” into the SEPLUGINS and I was able to see them.
@DaveBudness28 күн бұрын
@@KoRupT_ then I did mine wrong sometimes I can see wallpapers not all the time depending on which ones . So I would have to enable and disable
@KoRupT_28 күн бұрын
@@DaveBudness well hopefully that might work for ya now. Mines working great so far no issues!
@DaveBudness28 күн бұрын
@@KoRupT_ I don't even have one anymore, haven't for years.
@CoreDreamStudios28 күн бұрын
Great video, this helped a ton. Subbed.
@DaveBudness28 күн бұрын
glad it works.
@austineleo5839Ай бұрын
WTF With that intro 😅
@DaveBudnessАй бұрын
OH YAY!
@CasualgamerBEАй бұрын
It's not a best buy exclusive you can just buy it everywhere online where you want
@DaveBudnessАй бұрын
@@CasualgamerBE oh, they should at least take the sticker off stating that
@wamchrXmeАй бұрын
i’m having a hard time getting ctf themes to works, just come out corrupt while the ptf ones work fine. any help?
@DaveBudnessАй бұрын
@@wamchrXme got me. No idea. Try googling it yet? I’m sure there’s Reddit threads on this. It’s super old out dated tech.
@boot2gut818Ай бұрын
hey have you notice how the sound effect is missing when the player gets hit? is this port missing that that feature?
@DaveBudnessАй бұрын
@@boot2gut818 I couldn’t tell you honestly . All I did was show how to install . I’ve never played any of the games. This was all for fun and educational purposes. Sorry.
@glennw7118Ай бұрын
I know this vid is old but i still have my 2011 MS3. I have a magnaflow muffler and a resonator delete but could never get that sound. Its almost time to replace my system and I want to do it before another NY winter. What is your actual set up?
@DaveBudnessАй бұрын
I don't know. I don't have the car anymore. I'd like to get another one though. I had CP-E Parts on the car, that magnaflow exhaust. I think some corksport
@DaveBudnessАй бұрын
Hey! went back to old videos I found my mod list Mods: B.C. Racing Coils Magnaflow Exhaust Cobb Access Port V3 MS-Style Front Lip (Urethane) Fits 10-13 MazdaSpeed 3 5dr Hatch BNR S4 Turbo for Mazdaspeed3/6 MPS3/6 Grimmspeed 3Port Boost Controller 057028 Bosch 3Bar Map Sensor and Harness HTP 3.5" Full Intake for MPS3/6 MS3/6 to 3" Turbo Glowshift - 2010-2013 MAZDASPEED3 GRAY BEIGE TRIPLE GAUGE PILLAR POD 52mm or 2 1/16" Gauges - Oil / Boost / Battery OZ Ultraleggera Rims / Gun metal OEM rims that came with car Tanabe Strut Bar Sure Motorsports - SURE VENTUS™ PRESTIGE KIT IN IGNITION RED (Blow Off Valve) Corksport - 2010-2013 Mazdaspeed 3 Leather Steering Wheel Corksport - 2010-2013 Mazdaspeed 3 Radiator Panel Corksport - 2010-2013 Mazda 3 and Mazdaspeed 3 Hood Strut Lift Kit Corksport - 2010-2013 Mazda 3/Mazdaspeed 3 Eyelids Corksport - 2010-2013 Mazdaspeed 3 Hood Scoop Corksport - Urethane Exhaust Hangers for the 2010+ Mazdaspeed 3 and Mazda 3 JBR - Stage 3:Red Adjustable Shift Plate, Bushings & 80a Motor Mount JBR - Tru-Torsion.125 Rear Sway Bar - Red JBR - Tru-Torsion 1.25” Billet Sway Bar Bushing Brackets JBR - Mazdaspeed 3 51R Small Battery Box CPE - Mazda Mazda3 / Mazdaspeed3 Gen2 TowPlate CPE - Mazda MZR DISI 2.3 =LTRmani™ Turbo Manifold CPE - Havoc™ Mazdaspeed Intake Manifold CPE - Mazda Mazdaspeed3 QKspl™ Catted Downpipe CPE - Mazdaspeed3 2.3L Turbo HavocRail™ PFI Mazdaspeed Port Fuel Injection Rail CPE - MZR 2.3 Turbo BlockD™ EGR Delete Kit CPE - Mazda Mazdaspeed3 Gen2 Core™ Front Mount Intercooler Damond Motorsports - Mazdaspeed3 Oil Catch Can Kit Stage 3 (Dual Catch Cans) Damond Motorsports - Vacuum Block (Not Installed)
@glennw7118Ай бұрын
@@DaveBudness Omg thanks fir the info. Very helpful. I'm not going to go that far for a daily driver but I really appreciate it.
@DaveBudnessАй бұрын
@@glennw7118 yea welcome, I put in around 10K into the car. got myself into debt cause of it.
@Now_RoxasАй бұрын
Thanks.
@DaveBudnessАй бұрын
its super old, but glad it still works.
@grmpyoldjock8251Ай бұрын
Good luck with the move buddy
@DaveBudnessАй бұрын
Thanks my guy! I'm at my second hotel. Tomorrow I have 5 hours and some change to go. The office isn't open on Sundays, so Monday I'll be able to get my keys. So it will be another night in a motel.
@stephenk6567Ай бұрын
Thanks legend
@DaveBudnessАй бұрын
Glad it worked.
@vincent.416Ай бұрын
Thank you! Couldn't remove nolockscreen plugin and the vita would turn on by itself and lock up. Had to delete the file from the ur0/tai folder.
@DaveBudnessАй бұрын
all this is new to me, I haven't touched this in many years
@gck86Ай бұрын
i want to get the ps5 theme on the psp.
@DaveBudnessАй бұрын
okay
@raresgott9040Ай бұрын
What do I do if my PS vita is modded. Will taking out the memory card, resetting it and then putting it back in not delete my data?
@DaveBudnessАй бұрын
No clue, try it out and report back.
@lxnarlovessosaАй бұрын
i dont know what im doing wrong i followed exactly i think it might be my cfw im trying this with ark-4 and when i have no "Restart VSH" rather i have "Reset VSH" and then hen i try to tun the plug in on and or off it wont it stays on and it wont work. ive completely deleted all the files and restarted but it still wont work any help or tips?????
@DaveBudnessАй бұрын
@@lxnarlovessosa no idea but I googled and this showed www.pspunk.com/psp-cxmb/
@lxnarlovessosaАй бұрын
@@DaveBudness you mentioned you need to download or make a SePluggins folder do you have a link for that or a video regarding that
@DaveBudnessАй бұрын
@@lxnarlovessosa just google it. fine i'll google for you wololo.net/talk/viewtopic.php?t=3694 www.psx-place.com/resources/6-60-plugins-on-6-61-infinity-adrenaline.578/
@Lucas78766Ай бұрын
You need more likes (seriously) I recently got my psp a few days ago just to bring in the nostalgia and the themes that I just have installed are beautiful!
@DaveBudnessАй бұрын
Glad it still works. It's such old tech and whatnot.
@Lucas78766Ай бұрын
@@DaveBudness Same!
@RedPixel2023Ай бұрын
great vid man...happy to see that thumbs down button is very dead!
@DaveBudnessАй бұрын
okay.
@vornamenachname-xw9jyАй бұрын
my game wont start it says ""Error could not load ux0 :data/bully/libBully.so."
@Ayden-wk4biАй бұрын
Does this work with a emulator
@DaveBudnessАй бұрын
No idea, try it out, and report back.
@gr_.8357Ай бұрын
hi dude, can you send me the dead space data file?
@DaveBudnessАй бұрын
@@gr_.8357 google has it I don’t. Sorry . I do t have anything from this stuff anymore
@gr_.8357Ай бұрын
@@DaveBudness Well, that is, can you send me a link?
@DaveBudnessАй бұрын
@@gr_.8357 google.com there is the link.
@gr_.8357Ай бұрын
@@DaveBudness ahahah, bro i think yo get link for data file, bye
@lordlinden3693Ай бұрын
Dave, how do I fix the could not load data/canada/libmain.so error?
@DaveBudnessАй бұрын
github.com/Rinnegatamante/Death-Road-to-Canada-Lite I have no idea, i had to google
@inf3rnalgL0ryАй бұрын
look this hands
@DaveBudnessАй бұрын
What?
@ADRIANCRAFT06Ай бұрын
I tried rebooting it over and over and it won’t show the um0 or whatever it’s called
@DaveBudnessАй бұрын
vita.hacks.guide/yamt.html try that, I don't even know. It's so outdated.
@davehansen4208Ай бұрын
What website did you download the firmware from? Thought you said from a post on your website???
@DaveBudnessАй бұрын
just google psp firmware download. I don't even know I don't do anything with a psp.
@passionforart7160Ай бұрын
Hey my vita is hacked hankaku so if i do this so the previous owner account will be removed right? Not my other game data or anything?
@DaveBudnessАй бұрын
@@passionforart7160 don’t know I don’t fuss with this anymore . Try it out and report back
@justincantwell4171Ай бұрын
I have watched many tutorials and i really enjoy how well this guy explains things. Always a very fine job!
@DaveBudnessАй бұрын
@@justincantwell4171 thanks, I try to. Some are visual better than others, doing stuff verbally. I rather be shown how to do things
@Optiplex3212 ай бұрын
Great! Thanks. Almost thought I'd bought a paperweight.
@DaveBudness2 ай бұрын
@@Optiplex321 ya welcome
@ChrisHewitt-omnichewitt2 ай бұрын
If you hit select while the keyboard is up, you will get a bigger Qwerty keyboard
@DaveBudness2 ай бұрын
@@ChrisHewitt-omnichewitt nice tip
@ChrisHewitt-omnichewitt2 ай бұрын
@@DaveBudness I wanna say I was catching myself do that with the ps3 as well, but both offer more than the “candy bar” phone keyboard, even one that should be just numbers if I recall correctly
@DaveBudness2 ай бұрын
@@ChrisHewitt-omnichewitt gotcha
@DaveBudness2 ай бұрын
@@ChrisHewitt-omnichewitt okey dokey
@wauggy31582 ай бұрын
how do you save ur progress it wont let me at all?
@DaveBudness2 ай бұрын
@@wauggy3158 no clue
@Panda_Nez2 ай бұрын
i don't know what im doing wrong. I followed everything but nothing
@DaveBudness2 ай бұрын
@@Panda_Nez couldn’t tell you there’s links out there on google that explain stuff www.pspunk.com/psp-cxmb/
@joeymassaro24802 ай бұрын
Thank you soo much.
@DaveBudnessАй бұрын
welcome
@exit_5152 ай бұрын
Is there a way to run a ps4 controller on a psp?
@DaveBudness2 ай бұрын
Last time I checked many years ago there is a plugin, you need to use that auto plugin app.. can’t recall what it really is called