Reynaldo Velasquez

Пікірлер

@littleluxuries_435 20 сағат бұрын

Your video helped me so much, I just want to say thank you!!

@ReynaldoVelasquez 18 сағат бұрын

@@littleluxuries_435 I’m glad this helped.

@vtecmike 17 күн бұрын

Dumb question but how do you remove the power source clip!?

@anhduy-pe7cx 25 күн бұрын

Hi there, I have a question is on model Mercedes w205 2014 and higher where I can put power of light ? Thanks if I have answer🥰

@martinstanczak8988 28 күн бұрын

What app are you using for this? I used to have the same one but now i cant remember.

@ReynaldoVelasquez 28 күн бұрын

@@martinstanczak8988 “My Smart LED”. Has a multi colored Bluetooth bulb 💡 on the app logo

@gnbpodcast Ай бұрын

Question my twinkle mode doesn’t work at all why’s that.

@ReynaldoVelasquez Ай бұрын

@@gnbpodcast possibly a defected unit or Bluetooth or remote can’t reach the light engine antenna for whatever reason

@KIMakaBLUE Ай бұрын

Was there a link for the fiberoptics?

@ReynaldoVelasquez Ай бұрын

Yes there’s a QR code you scan to be able to download the app and control the fiber colors with your phone app.

@ReynaldoVelasquez Ай бұрын

Oh did you mean a link to buy them? It should be in the description.

@KIMakaBLUE Ай бұрын

@ReynaldoVelasquez just noticing the first link was the whole kit and not just the box lol I am about to order and may need some guidance, the ceiling of my sonata is grey how do I make it black? More is it necessary to? I saw your whip already had a dark ceiling

@KIMakaBLUE Ай бұрын

@@ReynaldoVelasquez I'm saying do I have to get a whole new ceiling cover for my car since mine is light grey?

@KIMakaBLUE Ай бұрын

Also did you make some holes bigger and some smaller? It looks like that in the thumbnail photo

@traee2k290 Ай бұрын

Are all the kits (white ) hot and black ground ? I started electric work a while ago and always been taught black is hot white is neutral any help

@ReynaldoVelasquez Ай бұрын

I really don’t know. I can’t answer that. There are other KZfaq videos on wiring where they said black is ground. So that’s what I used as reference. I would advise looking around and seeing what others say.

@Rnitzsche04 Ай бұрын

I pull mine completely out hang my fiber up on a hook, helps keep the lay out clean and no rats nest happens put one in my truck N 1 in my kids car. I use a small drill bit. But I'm thinking of trying a big needle

@Rnitzsche04 Ай бұрын

Did 2 of these, doing 3rd one tomorrow. Time consuming.

@TheMedranos Ай бұрын

The thingy over heats so fast tho! Will it be a fire hazard?

@ReynaldoVelasquez Ай бұрын

Mine never over heated in my trunk here in Texas. Well it would be hot from the sun but not on its own. LED doesn’t really produce heat. And the motor is so slow I wouldn’t think it could catch fire. I have a fuse to help it.

@TheMedranos Ай бұрын

@@ReynaldoVelasquez ahhhh okay yeah it’s hot over here in GA right now. 98F no wonder, I was scared for a while I didn’t turn it on 😂. Good looks tho. Thanks for the advice !!

@Ryuuken24 2 ай бұрын

Going through the same pain, the bathtub tip is great.👍

@sythnapubg7926 2 ай бұрын

Great video. How thick was the diameter of the fibers? I am thinking 500 0.03 inches and 300 0.04 inches. I think 0.06 would be too much and thick?

@ReynaldoVelasquez 2 ай бұрын

03-04 should be perfect

@EliC216 3 ай бұрын

Hey do you have a ig bro .. I’m having trouble

@ReynaldoVelasquez 3 ай бұрын

ReynaldoVelasquezJr

@EliC216 2 ай бұрын

@@ReynaldoVelasquez just followed you bro thanks I’ll dm you

@isaakmalay2022 3 ай бұрын

l camera man

@isaakmalay2022 3 ай бұрын

tell yo kid to go inside

@goneclear7278 3 ай бұрын

Your amazing and a good dad thankyou

@thickyodasoda2989 3 ай бұрын

Ima try this on my cla !!

@pierreduy8838 3 ай бұрын

Wow Rey, that's impressive 329,xxx miles on you ex XJ. I'm having same issues. So far I've replaced throttle pos sensor, reman ECU, with negative results. I'll try your fixes now. Thanks for the great details in your video.

@garydeandeery 3 ай бұрын

I’m just doing my Range Rover sport now took mine out and painted it black then added 500 leds Marked out 6 squares to draw dots 80 in each square then did the side panels in diamond cloth and then added a switch to the center lights did take awhile but looks amazing Iv had people ask to do there’s lol. Cost me about £150 total and got told people charge £1500 for it or rolls wants 17 grand

@dellasmith423 3 ай бұрын

Thank you soooooooooooooo much my jeep is fixed. Thank you Again. Freeway here I Come

@jinnsane6712 3 ай бұрын

Literally the perfect video

@johnpaul4647 3 ай бұрын

What’s the best brand for starlight kit.

@johnpaul4647 3 ай бұрын

This video was very helpful thanks bro👍🏼. I was thinking on purchasing the items myself and just get them installed personally so i wanted some recommendations on good quality products. I have a crew cab gmc truck and was looking to get 800-1000 fibers. As far as the different style light show twinkle , pulse, shooting star, and possibly meteor . Any recommendations on that please and thank you 🤝🏼

@beemomusic 4 ай бұрын

I have the same one you have in this video for about 3 years…all of a sudden now it doesn’t twinkle in my car and i can’t change colors it’s just stuck on white. Have you ran into this problem or know how to repair this

@enriqquee_x 4 ай бұрын

My app doesn’t work no more it disconnected and it won’t connect anymore. I have to use the controller.

@hamzaimsalam2815 4 ай бұрын

Before you change the sensors , did the jeep had a problems with Gas ⛽️ Mileage,,, Because I changed everything sensor exabt the temperature and the map sensor,,, my jeep goes with Full Tank just 140 miles

@xvos2421 4 ай бұрын

hi.. so you don't connect anything to he car battery? thanks

@miniemouse2750 5 ай бұрын

Pregunta: ¿este sensor iat o mat, impide que prenda el electroventilador?¿habrá esa pieza para cherokee renix 1987?¿necesariamente tienen que llevar esos huequitos el sensor? Rockauto me vende ese sensor de temperatura pero no tiene huequitos El cable de mi sensor se destruyó y el sensor está carbonizado. ¿Qué puedo hacer? Ayuda por favor, gracias

@Iceemelts 5 ай бұрын

I’m doing mine this weekend. I’m glad I found your video. God bless you. Hopefully mine turns out good and I don’t give up 😂😂

@gangstalifers-4312 3 ай бұрын

Did you finish it this weekend 😊

@lewda1000 5 ай бұрын

Hi I have a gla 250, one of the dipped beams is out so i changed the bulb, didn’t work so I swapped the left ballast to the right and both headlights stopped working. I put the good one back and it was back to the same one off one on. Any ideas would be appreciated thank you

@tizzm949 5 ай бұрын

How do you get the 6 feet of cords to evenly spread out on your roof with that ammount of room

@katiekk9814 5 ай бұрын

nice vid really clear

@rellttgmatthews5227 5 ай бұрын

Do you have to wire this or can you just use it with the cigarette lighter

@ReynaldoVelasquez 5 ай бұрын

You can use both options

@Mikey.likes. 3 ай бұрын

@ReynaldoVelasquez is there a certain way i have to separate the fibers to install them?

@krod2162 5 ай бұрын

I have A93YJ with a 2.5 l engine in it and out of any other vehicle. I've ever owned I've noticed this vehicle is very sensor sensitive. It's good to keep up on all the sensors to keep it running top notch

@mrkevin891 6 ай бұрын

Most things from Amazon come from …

@ReynaldoVelasquez 6 ай бұрын

CHI-NAH! lol or Alibaba

@mrkevin891 6 ай бұрын

@@ReynaldoVelasquez yessir, most of the times the prizes are crazy on Amazon. I am thinking of doing this in my car but with smaller fibers like 0,25mm 0,5mm 0,75mm

@IReallySaidThat2 6 ай бұрын

I do this in cars I charge y’all 150$ just to do it and I can do it faster than him and easier.

@nathanpizza2777 7 ай бұрын

It was a great video but the gorilla clear grip glue did not hold the starlight fibres at all, we had to go over the whole 900 fibres with E6000 adhesive.

@ReynaldoVelasquez 7 ай бұрын

I’ve heard that before. It held on mine and others. Maybe it just depends. A lot of people use hot glue guns

@Nodnarb69 6 ай бұрын

@@ReynaldoVelasquezlol wtf might wanna put a disclaimer so no one else gets screwed

@ReynaldoVelasquez 6 ай бұрын

@@Nodnarb69 I’ll do that, thanks 🙏

@Nodnarb69 6 ай бұрын

@@ReynaldoVelasquez 🫡

@gomerrendon607 7 ай бұрын

is theres a local supplier of that fiber optic engine here in the philippines

@ReynaldoVelasquez 7 ай бұрын

I don’t know. You can get them on Amazon and Alibaba and various other websites

@veselintonev9930 7 ай бұрын

Hi mate, I have a 2014 cla 250! Thanks for the video. My problem is that the led daylight light is not working and I get an error that the turn signal does not work, which is not true. It works, but when I turn it on it clicks like crazy in the instrument cluster, but it flashes completely normal in the headlight itself. One thing to note is that when I lock/unlock the car it did not flash. My high and low beams work perfectly. Just the daylight led is not working. With your help I managed to replace first the balast on the bottom of the headlight, but nothing changed. Then I changed the control module which is on the side of the headlight/there was moisture inside/ and now the turn signal flashes when locking/unlocking the car. However, the daylight led came on only for a few seconds and went out again and does not work... I can see the following error codes when I scan with OBD: B177887 and B283F87. It's for the right headlight, left one is working perfect. Also, there has never been any water inside the headlight itself. Do you have any suggestions? Any help is appreciated!

@MrMrxoblivion 5 ай бұрын

I have the exact same issue as you described...did you get any further or have any more information??

@lynnemurphy2863 7 ай бұрын

What about Watts?

@shawnmac3304 8 ай бұрын

For some reason i cant mine to twinkle. On the app. It dose nothing when i ruen the speed uo and press play grrr

@ReynaldoVelasquez 8 ай бұрын

I wonder why… mayyyybe a defected light engine… or possibly a bad Bluetooth connection? Hmmm… or uninstall the app and reinstall. And of course make sure the light engine is one that twinkles. Also… I know the app sometimes have an ON OFF button you can press… and then you can adjust the speed from there

@gnbpodcast Ай бұрын

Did it end up working if so how having the same problem

@harisbouras 8 ай бұрын

why not download the app to the car unit?

@ReynaldoVelasquez 8 ай бұрын

Do You mean to download the app to the actual car LCD monitor? If so, I’ve never thought about doing that. Good question.

@harisbouras 8 ай бұрын

@@ReynaldoVelasquez yeah so you don't need your phone and they will look that they came out of the factory

@timteevin4517 8 ай бұрын

Why not remove the air cleaner lid? Much more room to work. Better viz for video. That rubber hose is a somewhat special elbow. Not a hose. They are known to dry out and crack, causing a vacuum leak.

@kowalski363 8 ай бұрын

Great video

@Chavez_Auto_Detailing 9 ай бұрын

Hey brother, I’m doing my project on my Escalade now. Quick question did you have any issues with that gorilla glue. I noticed one or two of my fibers broke right at where I applied the glue. I’m thinking it’s a bit to strong of a chemical for the optics. And I already applied it to half of the huge headliner. 😅

@ReynaldoVelasquez 9 ай бұрын

I never had that issue, but some people in my comments section did. If that happens you can try again or just switch to glue gun. I’m sorry that happened. Or even try a different glue to see if that works better

@Chavez_Auto_Detailing 9 ай бұрын

@@ReynaldoVelasquez Im going to try and cut a few random ones when it dries to see if it damaged the fibers. Definitely going to use glue gun on the other half. Also those two that broke didn’t have a lot of play on them. So hopefully don’t have to redo the whole thing. I was reading that the accelerator in that gorilla glue is to harsh for the optics, it eats away at the fibers and can damage and reduce the amount of light that comes through. Glue gun will allow more flexibility and won’t damages the fibers.