You are the best instructor this is the best video
@LvbjhhgАй бұрын
Thank u a lot, thats what ive been searching.
@inezmonheim564Ай бұрын
I love you
@laurahenriques43382 ай бұрын
when i click on one singular section to color it does not work, it always selects the hole circle
@kerry47883 ай бұрын
can you help with post requests on thunkable?
@artronpublicidad16343 ай бұрын
Hello, I bought one of these machines to cut 3mm acrylic but it only cuts 3mm acrylic, BLACK AND RED, the MARILLO almost cuts it, the other solid colors are only marked, can you help me with the parameters, thank you
@swinhoe19913 ай бұрын
I have artwork I want to to add on the card, however they are quite large and everytime I reduce the size of my image size to fit the card the quality is lost, any suggestions?
@mrgill12103 ай бұрын
JPEG images will always lose quality when resized. I recommend making your artwork in a vector based program like Adobe Illustrator and saving the image as an SVG file.
@edinmak92264 ай бұрын
hi, I bought an atomstack S20 MAX. I have a problem with engraving and cutting. During engraving, the material burns. I probably don't know how to adjust the parameters. Do you have any advice for adjusting the parameters. thank you very much
@user-zw2hs3uk9r4 ай бұрын
Thank you so much I learnt a lot. Really appreciate it
@xenleah4 ай бұрын
Perfect tutorial, thanks!
@Shakisco_4 ай бұрын
Is there a way i can get the poker print template?
@mrgill12104 ай бұрын
It's linked in the video description.
@englishrupe014 ай бұрын
Great project. 8/10. Don't see any rubric. However, i suggest using an 18650 inside, instead of the low energy 9v, especially as a life may depend on its longevity. I would use a Nano instead of the Uno, powered through a TP4056 board adapter/charger. Oh, and lower the wire height by tighter low profile connectors. Then seal the entire case with glue, since it is now rechargeable through the TP4056. Good job, though.
@mrgill12104 ай бұрын
Thanks. I will add that information for my students to see how the project can be improved. My intention was to show the class an imperfect device so they can see where mistakes can happen and how they can think about fixing potential flaws. The rubric was just a worksheet I handed out in class so they can better understand how their own projects would be graded.
@samueladeyeye30854 ай бұрын
What size did you use to design the card @Mr Gill
@mrgill12104 ай бұрын
The poker card is 813 x 1114 pixels.
@latonyanorseweather41195 ай бұрын
where do you get the poker template?
@mrgill12104 ай бұрын
I've added the link for the poker card template to the video description.
@colemanrhodes20065 ай бұрын
...Just what I needed. Thanks...
@nukenation32145 ай бұрын
But how do you change which is what in said pie chart. Excel keeps selecting all the wrong things
@patrickdingman15215 ай бұрын
Very well explained! Thank you
@petesixteen5 ай бұрын
what laser cutter program do you use btw? is it aps-ethos?
@mrgill12104 ай бұрын
I have access to a few machines. Ideally, I like to use LightBurn if possible but one of my machines is an Epilog laser so I have to use CorelDRAW for that one.
@user-kk3gz5qn4x7 ай бұрын
Very easy to follow!
@user-kk3gz5qn4x7 ай бұрын
Thanks for this!
@DontCallMeGarage7 ай бұрын
be careful running non-powered usb splitters on a laptop. it can fry the motherboard.
@mrgill12107 ай бұрын
Thanks for the info. I didn't know that.
@user-kk3gz5qn4x7 ай бұрын
Very educational!
@grim7898 ай бұрын
How would you do this using canva?
@mrgill12107 ай бұрын
This tutorial was made for Adobe Illustrator only. I have never used Canva.
@jopeesss8 ай бұрын
THANK YOU SO MUCHHHHHHHHH!!!!!!!!
@Adnan_Khan__1118 ай бұрын
Hello sir, are you on Instagram? I need to talk to you.
@mesanz4568 ай бұрын
thanks
@TheDefeatest10 ай бұрын
Thanks for this, Is an SVG file easier or more efficient than a DXF for a laser to cut?
@mrgill12108 ай бұрын
If your machine is compatible with both file types, there is no difference between the two.
@keaturefeature10 ай бұрын
Where can someone find these templates?
@mrgill12104 ай бұрын
I've added the link for the poker card template to the video description.
@gordkennedy105911 ай бұрын
Thankue!
@guarenchafa4912 Жыл бұрын
I don't get it, it's an alien but it's got a square back??? I mean wouldn't you want to give it a rounded body?
@mrgill12107 ай бұрын
I think the 'square back' you are referring to is the Tinkercad canvas. This would not be part of your 3D model when exported as an STL file.
@reppinhoopers Жыл бұрын
This tutorial is so extremely helpful, getting my artwork ready for screen printing! Thank you so much
@mrgill12107 ай бұрын
You are very welcome!
@yacinejulian6678 Жыл бұрын
It's not perfect because the whites will be outlined and you'll have doubles and the laser will do the job twice and probably the result won't be what you are looking for. "tick the ignore white box in image tracing menu" or use the Magic Wand to select and remove all the whites. Thanks for sharing.
@followthetrend1689 ай бұрын
Hey I can't see this option in 2021 can you please help.
@yacinejulian66789 ай бұрын
click on advanced to expend that menu and you'll find it @@followthetrend168
@kazisakhawathossain6164 Жыл бұрын
Mr Gill, I appreciate your tutorial. For a beginner like myself, it's easy to comprehend and helpful. I wish you well!
@mrgill12107 ай бұрын
Thank you!
@sargyboy5456 Жыл бұрын
Can I use Photopea for my image
@jigyasayadav9092 Жыл бұрын
Thank you sir
@NilexRacing Жыл бұрын
Dope. I've been trying to mess around with an image and I was just not able to get rid of the edge line. The tutorial helped immensely :)
@stuartbatcheldor5978 Жыл бұрын
This vlog is excellent. Thank you for making it.
@mrgill1210 Жыл бұрын
Thanks. Glad you liked it.
@smithart101 Жыл бұрын
superb, clear tutorial, cheers mate!
@CandaceChira1 Жыл бұрын
That list didn't come up when I hit image trace. Ugh.
@mrgill1210 Жыл бұрын
For 2023 versions of Illustrator, click Image Trace and from the new menu that appears, select the type of image from 'Presets'. It's the exact same list of options.
@thelegaloccupier Жыл бұрын
Thanks 👍
@danknightk6987 Жыл бұрын
thanks for this video i like it and appreciate it
@jacquelinemarkham5725 Жыл бұрын
How do you get rid of the blue lines to show original coloring?
@yokanshree4621 Жыл бұрын
Hello I want to know if you can change the default to trace to a different color instead of white after u finish tracing instead of going to fill them and select the color you want
@Vektorion Жыл бұрын
One question, how would you attach the eyes to the head if the eye holes are empty, don't they need a base underneath
@Vektorion Жыл бұрын
Thanks, you really helpled me !
@yokanshree4621 Жыл бұрын
I was looking for this everywhere
@TheBestUni Жыл бұрын
Thank you
@amoursofia5153 Жыл бұрын
Hey, my laser keeps saying it's disconnected.. I don't really understand how to fix it.