Guys that video saved me 600$ for a new sight. I wanted to switch to shibuya because my scope is loose after 2 years of intense shooting. Thank you very much!
@whereisthefilm19 күн бұрын
Congrats on the bronze medal at the Paris Olympics!
@ronelkins105719 күн бұрын
TRU Ball is simply the best.
@RichardCummings-k4q27 күн бұрын
Hey guys 💪🏾🏹 How's about a completely new revamped 6" slider target site ? Maybe gear or worm driven main moving vertical scope mount and a completely different approach to your scope mounting system- hexagon horizontal barrel instead of round ? 🤔 mmm
@MrYapdog29 күн бұрын
Levi, what about old eyes for the sight tape? i cant read the slider tape anymore. I cant shoot with readers on. I'm sure my only option is the Garmin or go back to a 7pin fixed.
@stephengatley814428 күн бұрын
I have both Axcel & HHA look into the hha they have a magnifier lens for the tape.
@TRUBALLAXCEL28 күн бұрын
You can find some sight scale magnifiers on our online store! store-truball.myshopify.com/collections/axcel%C2%AE-accessories
@Josh-v1m7w3 күн бұрын
Try out Night Sight Tape sight tapes. They sell sight tapes that have larger font for older eyes and glow in the dark for those low light times. Works great on my UV and CBE setups.
@jasonnester9514Ай бұрын
Wow no more Cbe
@ryanbealer4280Ай бұрын
Quick question. I want to use my landslyde on my Lift through the bridge lock slot. When I slide the bar in deep, I notice that it's about 1/4" away from my cable guards on my Lift 29.5. Is that enough room? I don't know if the cable guard rod flexes or not. Thanks for any help
@TRUBALLAXCEL28 күн бұрын
Hi Ryan, you should have enough clearance as I don't think the cable guard flexes too much. This might be a better question for Mathews though.
@ryanbealer428028 күн бұрын
@@TRUBALLAXCEL I think you're right because technically it would flex away from the sight rail during the draw.
@slyfauxofficialАй бұрын
Top sight. Have run it for multiple years; but too fragile. Any bump and the 1st and 2nd more often than not move.
@nathanhollenbeck8592Ай бұрын
Just dont knock your bow over. Bumped mine and it lamded scope down on my carpeted basement floor and bent in two spots. Did it again to test and the sight was was multiple feet off at 20.
@thebootbowhunting7413Ай бұрын
Does any retailer do custom 5 pins accustat orders? Looking for top 3 .019, bottom 2 .010.
@kee767822 күн бұрын
Yes you can do that with the Landslyde...I"m going to do exactly that.
@G7rtgescАй бұрын
Great sight, picked up the direct mount version. Did the ranger pin vs the 5 pin but it’s a solid set up either way.
@rf6934Ай бұрын
I just purchased a AVX-41 and I am very pleased with all the options I can do with this scope system. What no one talks about is that the single pins can be set at the 3 o’clock, the 9 o’clock or the 12 o’clock; it’s cool to just see your pin hanging out there. It’s also cool to switch out .019 pins for .010 pins by just unscrewing the pin set. This is the only sight that gives me so many options. Pin size, pin color, pin configuration (one or 2 pins, Ranger option) Light kit options (2 that know of) Upper level hole delete, if you want Rear sight ring (torque ring) on or off or shaded Front sight shade Rheostat cover, to dim or not to dim And then magnification or optic center dot Did you know there is a .029 pin available for this also? In 3 or four colors… And this is just the optical tube, the rest of this thing is pretty impressive too. Red distance indicators or green available, my option. Metal sight tapes or vinyl stickers, again, my choice. You can change the colors of the bubble level too. A few more options I didn’t mention either. What I purchased is options available to me. And Made In USA. And run it however I want too. My biggest decision was AVX-31 or AVX-41. Very pleased with this thing, I would highly recommend.
@stevehernandez1637Ай бұрын
Works awesome
@stevehernandez1637Ай бұрын
Got mine today
@walderman55Ай бұрын
Thank you great breakdown
@lCarrera7374Ай бұрын
Nice..
@lCarrera7374Ай бұрын
That’s great release
@rf6934Ай бұрын
I am just new to archery, I can’t wait to someday upgrade to one of these awesome releases.
@phantomcruizerАй бұрын
Is there a specific way to set the sensitivity ?
@TRUBALLAXCELАй бұрын
You can set your sensitivity wherever you want, but I would reset the travel adjustment too. You can follow the instruction in the video to set your sensitivity!
@phantomcruizerАй бұрын
@@TRUBALLAXCEL I did reset the travel adjustment by following the video instructions, and l adjusted the sensitivity as well. Thank you, for your reply.
@acebuck3487Ай бұрын
Seems like it's to much to deal with all the adjustments I'll stick with my ultraview
@ramsaycountry1177Ай бұрын
I'll be looking for that red, white & blue hat at Nelsonville!
@ramsaycountry11772 ай бұрын
I saw you guys a Pipestem & Franklin. Great shooting Brandon at Pipestem. I shoot IBO advanced hunter class. What's the contingency money for that class? It's an amateur class, as you know, so anything is better than nothing. Lol
@TRUBALLAXCELАй бұрын
The contingency is for the 1st places only each class.
@HaKer-cx4kh2 ай бұрын
Hc
@sebastianruhl62212 ай бұрын
Hi! Just got my Achieve XP Pro today. Wow, it's really that good. One question: How do I tighten the screw that relates to the red indicator arrow for the scale on the inside. It's quite loose and I'm afraid it'll change by accident and all my yardages are going to be off. Thanks so much!
@TRUBALLAXCELАй бұрын
There is an indicator lock screw right above the knob that you can adjust. For more information, please call us at (434) 929-2800. We're happy to help you!
@user-st1ib1lj5n2 ай бұрын
Instead of doing it this way I just backed out the fiber a couple inches and put it directly into that hole in the T Connector and there’s plenty of blue light from the screw-in light to light up the pin in low light conditions when I need a lighted pin.
@jeffleung9583 ай бұрын
When will the 3/8-32 light adapter be available for purchase?
@brucehu4283 ай бұрын
Where can I get the 3/8-32 light adapter?
@Mrcdwilliams3 ай бұрын
Spencer, I no longer like you guys! 😅😂😂 I've struggled with this for several months. I used a hair tie in lieu of a spacer to adjust the light focal point! Had I simply asked you all, I would have solved this LONG ago! Thanks for the instructional video!! Oh, and send me the light adapter. Thank. 😉
@cftuhr7337rirjxx93 ай бұрын
I also want to use it, T T
@Kronash3 ай бұрын
This hits like breaking bad
@ryankarl84723 ай бұрын
Cool process, What is it you sell?
@archery30x3 ай бұрын
Archery release aids
@archery30x3 ай бұрын
Archery release aids that are best in the world
@DJSLAYERYT-ju3ds3 ай бұрын
Same here i use the goat right now
@rogermcclain20743 ай бұрын
They make the highest quality products and made in America! They’ll get my money
@SurvivalSavvvy3 ай бұрын
He can read I will give him that. hahahaahahaha
@WhileHomeschoolingChannel3 ай бұрын
I got one for my daughter, and it’s coming tomorrow 🎉🎉🎉