Thanks for the video. Can you do a video for slip critical connections too.
@StructuralCentral25 күн бұрын
That's a great suggestion! It's already on a list of potential future videos along with a video about prying action force on bolts.
@rupeshkhandekar63402 ай бұрын
Thank you very much for your this video. I would appreciate it if you could clarify the column cap plate connection design check.
@StructuralCentral2 ай бұрын
You're welcome! There's multiple possible configurations for connections with cap plates so I can't really make a general comment about their design. Is there something that you were specifically wondering about?
@saqibhayat95882 ай бұрын
Love the 0:50 book opening aound. Reminds me of SEGA games of my childhood. 🎉❤
@StructuralCentral2 ай бұрын
Haha, I can see that. I'm glad this structural engineering video could give you some nostalgia!
@NachoPage923 ай бұрын
Gracias por compartir el material. Saludos!
@StructuralCentral3 ай бұрын
¡De nada! Me alegra que te haya gustado. ¡Saludos!
@SouvikCivil3 ай бұрын
Thanks for explanation, very useful.
@StructuralCentral3 ай бұрын
You're welcome! I'm glad you found it to be useful.
@RunnerProductions4 ай бұрын
Nice content, can you publish something about dig depth and concrete diameter size to hold any type of pole or tall structure built on 'stilts'?
@StructuralCentral4 ай бұрын
Determining the soil pressures and stability of an embedded pole is a subject that is both interesting and complex, so it would be a good topic to make a video about. I'll keep that idea in mind. Thanks for the suggestion!
@owenk77694 ай бұрын
Great Video. I love how you listed out all the equations and the code references. The graphic are also very helpful. Thank you for sharing, and I look forward to your future videos.
@StructuralCentral4 ай бұрын
That was very thoughtful and kind. I look forward to continuing to help others gain a deeper understanding of structural engineering in a simple, clear way.
@chalelitowelding66884 ай бұрын
Thanks, helpful info for my cweng exam
@StructuralCentral4 ай бұрын
That's great! Best of luck to you :-)
@elbahja035 ай бұрын
This was very nicely done, I appreciate the effort. Please keep posting more videos like this.
@StructuralCentral4 ай бұрын
Thanks for the kind comment! Additional videos are planned, but more focus is currently being given to improving www.structuralcentral.com.
@cesarguzman87446 ай бұрын
Wow now i can see my desing from other point of view, good video. When more?
@faizulzuraimi53937 ай бұрын
Would the same calculation also apply if the load is applied in normal direction//out of plane to the weld? Ie imagine i have a pipe leaking. I plan to patch it up with a steel and weld via fillet weld. The force (water pressure from the hole) is acting in normal direction to the steel plate.
@ludwigvonrothbard12078 ай бұрын
Thank you. Very well done, interesting and helpful.
@ANJA-mj1to9 ай бұрын
I have seen your presentation before ~ year an add notes. As you have said snowfall and drifting of snow on roofs as well as in roads, harbors, ports, dams, karst buildings, airpots snd railways must be removed. You give me path to see how to start research existing method and combine in a model for wind and snow simulation. Many researchs use FLOW-3D with general purpose for transient fluid flow phenomenon that runs under UNIX on workstation computers. To make real case we must imply geometry from both CAD models and digital terrain models must be converted to an appropriate format. Meteorological and hydrological data for boundary conditions as the sources usually field measurements at specific places. With this data we figure vector plot of wind speed and direction for horizontal cladding with different placings of gaps as well as a three-dimensional simulation of snowdrifs by numerical discrezization of two phase problems for a simplified drift-flux model and solutions similar to real measurements. Like you content as well as The Method called SNOW - SIM.😊
@IvoCampi110 ай бұрын
Great explanation, thanks!
@christopherchiaro232811 ай бұрын
Awesome videos thank you
@AnbazhaganRamasamy Жыл бұрын
Thank you for the valuable information. Is there any similar available for aluminium welded connections?
@StructuralCentral11 ай бұрын
There are special considerations that are unique to the design of aluminum welded connections. In Chapter 20 of the 2021 International Building Code (IBC), they direct you to the 2020 Aluminum Design Manual for the strength of aluminum used for structural purposes in buildings and structures. You may also be able to find some information about welding aluminum in American Welding Society (AWS) D1.2, Structural Welding Code - Aluminum. I hope this helps!
@Wilders53 Жыл бұрын
You forgot something! If a guy named Scott Hall welded on it add 99% strength to whatever the product is 😁👍
@StructuralCentral Жыл бұрын
Haha, we'll have to talk to AISC about adding in a 1.99 Sh factor to Fnw whenever you're the welder. I'm pretty sure, though, that you'd end up with more work than you could possibly handle!
@Vkmummer Жыл бұрын
Hi, Can you post a video on 2 side/3side displacement of a base plate with stiffner plate/bracket along with the tension/shear force and moment resolved tension force on bolts
@StructuralCentral Жыл бұрын
Thanks for the suggestion! I always appreciate hearing what people would like to see next. I am planning on making a video about the design of baseplates. Subscribe so you don't miss it :-)
@SrilankanProud1 Жыл бұрын
AMazing! You are the best!!! Thank you so much
@StructuralCentral Жыл бұрын
Thank you so much for the kind words!
@SrilankanProud1 Жыл бұрын
Amazingf! thank you so much!
@StructuralCentral Жыл бұрын
Thank you so much for the comment!
@trananh1832 Жыл бұрын
Wow, So wonderful! I'm from Viet Nam. Hello everyone!
@FelixMatveev Жыл бұрын
Very interesting!
@StructuralCentral Жыл бұрын
Thank you! At first glance, many people tend to underestimate the complexity involved in the design of welds.
@Xeirus Жыл бұрын
When using an I.C. Method, do you need to provide a weld of uniform leg size?
@Szhihihihihihi Жыл бұрын
Thank you !
@StructuralCentral Жыл бұрын
You're welcome :-)
@Szhihihihihihi Жыл бұрын
Thank you !
@umutyigittorun Жыл бұрын
How do we calculate the snow drift if the roof is flat but there is a air vent or a chimney etc. on the roof just like in the 'Drift Snow Load' part of the video?
@StructuralCentral Жыл бұрын
Take a look at the "Roof Projections" section of ASCE 7 (Section 7.8 in ASCE 7-16). Projections on the roof get designed as windward drifts (0.75 factor on hd) using the length of the roof upwind or downwind of the projection. Also, note that for projections less than 15 feet long, drift loads are not required. Hope this helps!
@umutyigittorun Жыл бұрын
@@StructuralCentral Thank you, I will take a look now. Much appreciated
@furkantoraman8987 Жыл бұрын
hello, how should the snow load be calculated on multi span roofs? I couldn't find anything about it in asce7-16. Should it be calculated by the Sawtooth Roof division?
@StructuralCentral Жыл бұрын
I'm not sure exactly what roof geometry you're referring to when you say "multi span roofs", but I can point you to some cases that require special attention. If your roof surface is supported by continuous, multi-span beams, you'll need to consider multiple load patterns with full and partial loading on different spans per ASCE 7-16, Section 7.5.1. If your roof consists of different slopes that merge together, then the sections on Multiple Folded Plate, Sawtooth, and Barrel Vault Roofs may apply. (You can do a Google Image search for these terms to see exactly what they are.) Section 7.4.4 requires you to use Cs = 1.0 and Section 7.6.3 requires you to use unbalanced snow loads with higher loads in the valleys and lower loads in the ridges. I hope that this helps!
@furkantoraman8987 Жыл бұрын
@@StructuralCentral First of all, thank you for answering my question. I'm sorry for my bad english. The roof type I mentioned is referred to as "Multi span roof" on page 24 of EN 1991-1-3 in Eurocode. there is also this type of roof at the bottom of page 33. How should the snow load calculation of the roof type formed by combining two or more roofs like this be done side by side? Snow will accumulate at the junction of the two roofs due to snow drift and how should this be calculated? thanks
@StructuralCentral Жыл бұрын
The Eurocode examples of "multi span roofs" that you mentioned appear to be referring to the same thing that ASCE 7-16 calls "sawtooth roofs". Take a look at ASCE 7-16, Figure 7.6-3 to see the design load cases. They account for the additional snow that accumulates in the valleys.
@furkantoraman8987 Жыл бұрын
@@StructuralCentral Thank you so much 🙏
@nabilap6856 Жыл бұрын
you save me
@landricojr.garcia6505 Жыл бұрын
Very good explanation, clear and very understandable
@StructuralCentral Жыл бұрын
I'm glad you found the explanation to be clear since there's a lot of steps to determining all of the weld stresses, especially when it comes to the Instantaneous Center of Rotation Method.
@jaychen8214 Жыл бұрын
Thank you for the video! How to calculate the bearing stress if threads are not excluded as shown in the right joint when the video is at 2:12?
@nirmalsurendranmenon7049 Жыл бұрын
A c channel is bolted eccentrically to a concrete wall and the unbolted side of the c channel is supporting a cable tray. The bolts are 6 numbers in 2 columns 6 inch apart. How do I know if it would be acceptable if we reduce the 6 inch to 4 inch (between the bolts)
@FrankTheTankX42 жыл бұрын
Can you share where you got the uneven load distribution equation for the bolts at 1:48min in the video?? Thanks!
@StructuralCentral2 жыл бұрын
Check out the commentary for Section J3.6 of AISC 360-16. The paragraph right after they show Equation C-J3-4 discusses everything that is shown in the video about determining Fnv. I hope that helps!
@raretapes80572 жыл бұрын
Very good graphics and clear, helpful explanation. Thank you very much.
@StructuralCentral2 жыл бұрын
You're welcome.
@bishalnayak61622 жыл бұрын
Super duper is helpful. Please make some more videos on different topics of structural.
@umithenkoglu3342 жыл бұрын
Thanks for the nice explanation.
@StructuralCentral2 жыл бұрын
Thanks for the comment! I'm glad you found the video to be helpful.
@nawaf80992 жыл бұрын
Very helpful channel ,please keep going
@zachydrogeo2 жыл бұрын
Thank you for the high-quality video! Theoretical videos with good graphics and clear explanations for Steel Design are lacking on youtube.
@StructuralCentral2 жыл бұрын
No problem! I'm happy to be able to fill that niche.
@zachydrogeo2 жыл бұрын
@@StructuralCentral I’ll be the first one on the Patreon! Anything to provide future engineering candidates with better study resources. May I suggest collaborating with The Efficient Engineer? They seem to be the only other similar creator. There’s definitely a demand. I hope the channel takes off!
@user-ux3nh4iw3y2 жыл бұрын
Great software! Great video. Interface is much more user-frienfly than Enercalcs. You should definetely add more calculaton templates
@StructuralCentral2 жыл бұрын
Making the interface simple and straightforward without options hidden in menus was one of the design goals for the software. More calculations are being developed now.
@pragadeesh7322 жыл бұрын
Please do an Video about Erection Sequence of Main Steel & Misc
@jeffersonalvesfalcao99222 жыл бұрын
excellent thanks !
@raccoon8742 жыл бұрын
*IF YOU PUT A GIANT PARASOL OR TARP THEN YOU DON'T NEED THESE CALCULATIONS*
@StructuralCentral2 жыл бұрын
That's one solution, haha! I think the calculations are easier, though :-)
@marcinbroslawski2 жыл бұрын
Very good description 👍
@seryunkwak18242 жыл бұрын
I love your channel. Please keep going
@seryunkwak18242 жыл бұрын
@@StructuralCentral Please do some seismic load on structure!
@cfcalle2 жыл бұрын
This video is so helpful! Thank you very much :)
@nicolasramirez39442 жыл бұрын
Awesome explanation and visual graphics!
@nicolasramirez39442 жыл бұрын
Not a huge deal, but the link in the description doesn't quite work. Good luck with getting your tools out there!
@sarahzulu212 жыл бұрын
What is you are asked to calculate live load using elastic method? For instance,Bolts group design. A bracket plate is connected to a W-shape column. The layout of bolts group is 5 by 2 (5 rows and 2 columns). A325 bolt, 3 inches spacing vertically and 5.5 inches spacing horizontally, type N, loading case S, 7/8 inches diameter. Eccentricity e=16 inches. If the dead load DD is 10kips, what is the maximum live load LL?
@StructuralCentral2 жыл бұрын
For detailed, bolt group calculations, you can go to www.structuralcentral.com and sign up for free.
@LvPatriot12 жыл бұрын
Thank you very much, finally a great explanation :)
@StructuralCentral2 жыл бұрын
You're welcome :-)
@StructuralCentral2 жыл бұрын
Yes! It's actually in the works right now and should come out in the next couple of weeks. You can subscribe so that you are notified when it is released.