if your phone is usb-c than yea

its so gooddd

hey, so after seeing your comment i tested it around on my PS5 and i got it to work however not without issue. So for me when i used a USB C to USB A cable (the included one and other ones i had) the sound of the mic was all distorted. I tired the USB on the front and the rear of the PS5 but same issues with the distortion. BUT when i use a USBC to USBC cable and connected to the front USBC slot of the ps5 the sound worked just fine. To get the PS5 to switch to the AM8T you need to go to settings -> Sound -> Microphone and change the input device to the Fifine mic. It should change automatically. You can also hear the mic levels going to the adjust microphone level tab and that is where you can hear how the mic sounds. Keep in mind to be able to hear the mic you need to unmute the mic by pressing the mic button on the controller. In my experience when i connected the mic it also changed the audio output to the mic. So if you want to keep the sound coming out your tv you need to change the audio output back to HDMI device but if you want to use the headphone monitoring on the mic you can keep it on the fifine mic and connect headphones to the bottom of the mic and control the volume using the knob. I hope this all helps.

Thank you, i appreciate it.

Thank you for watching, and glad i could help in your decision.

Thanks for watching! As long as you don't have your RGB bright you'll be able to see the key legends at night. If you have your brightness settings on your RGB you might have hard time reading the keys.

Yes, it should come with all the keys you'll need for your 65% keyboard. the only thing I will like to mention is it comes only with a 6.25u spacebar so if you need something bigger or smaller you'll have to look at a different set. 6.25u is pretty common size so you might be fine.

Thank you! This video is kinda old now, Canon has released a much better way to use your camera as a webcam in OBS. It is called Canon Webcam utility which is the better way. With this utility you just use a USB to your camera and connect in OBS using the Canon Webcam utility in the drop down of the video sources. If you still having delay issue, at least with my experience with EOS R, if i use face tracking or eye track AF it causes delay. i use either single point or the large box AF. I hope this helps.

Nahh you skate content is good enough! you're fantastic!

Hey, thanks for watching! So few cons with these after using them for sometime now are that they're finger print magnets so you'll have to wipe them down. Another thing is if you have sweaty hands/fingers your figure might slip off the key if you're gaming. If you have an RGB keyboard and you have the LED brightness high its hard to see the characters on the keycaps. I still do recommend them, but those are just 3 things to consider to be possible deal breakers for you.

@@LegendGary213 Thank you very much for your opinon 🙏

With keeping it from moving in the frame once you place the comic and add the back portion to seal it, with the thickness of the comic and the pressure from sealing the frame it kept the comic in place. I would image most comics would be thick enough to stay in place. If you have any issues keeping it place, you can probably use a small piece of scotch tape folded and add to the back of the comic to keep it in place. Hope this helped. Thanks for watching

Hi if he doesn't reply, my advice, start small and look if the hobbie's for you😃 It can be frustrating if you break stuff, buy unreturnable things you don't like and with it being niche you have group buys and sh*t. Maybe buy the gmmk barebones, inform urself abt switches, buy those, and finally sum random keycaps you like from Amazon. You can return it could be pricier. Also it isn't as hard as soldering or lubing, tapemodding and all that stuff. It's a rabbithole, really, and every keeb enthusiast calls it so