I liked your video but I did not find it informative. I bought this same oven December 2022. At the time of purchase, this was a poorly designed item. I'll tell you why. The interior walls of the oven flexed to the point that, when cooking food, the tray and food would slip off the side supports and fall to the bottom of a very hot oven. I brought this to the attention of Toshiba (Midea) and was refunded my entire purchase amount and was told to discard the oven. I did not discard the item right away thinking I could somehow work around the issue. But, after several weeks, I was tired of having to deal with the issue. I noticed, after my contact with Toshiba (Midea), they were no longer selling this oven on Amazon. At the time of purchase, I was not aware of the issue, but I eventually decided to read the other reviews on this oven and sure enough several others experienced the same issue. I am pretty sure I was not the only one to contact Toshiba (Midea) about the problem. Your review, I felt was incomplete, because you did an "unboxing", and did not actually use the oven in a demonstration. Toshiba has come out with a Rotisserie version of this oven. I just purchased it and hope it is better than this model you reviewed. Cheers!

This video has helped me descale twice (this year and last). Thank you!

Thank you for creating this how-to-video. I didn't want to purchase a new ceiling fan and now I know I can fix the pull chain problem instead.

Good work thank you.

Why did he call the 3rd stage the first stage?

No matter how many years have passed, this is still beneficial to anyone who is trying to fix their ceiling fan mechanism. I have at least two of them either stuck in an on position that no longer functional or the entire chain broke off from the switch. So in summer time either hot to death because it is stuck at the lowest speed or in winter time cold to death because I need to have the lights on with low speed fan on.

Thank you very much! I was able to do this successfully. Had a little trouble getting the light out but once I figured it out, pretty easy.

THANK YOU!!!! SUPER HELPFUL

Greatly appreciate the video. For $8 and a trip to the local hardware store, it was so easy to fix!

This is not accurate at all. autozone told me bad charging system I use this one it told me good all bad

Great video, have you ever refilled the toner?

Great video, thank you. I see one line going into the holding tank but I don’t see a water line coming out, what am I missing please?

Great review!! I appreciate you taking the time to go over every aspect

Is it necessary to adjust the heating section when replacing the nozzle? My printer (Monoprice IIIP) seeks a home position when starting a print. I assume that's to get into the starting position and find out where the edges of the printer are (including the floor). Would this be true or are adjustments necessary? Alternatively, could you just reprogram the home position through the printer's console by setting the Z position?

Does it have times for soft book and hardboiled?

The hot water is always on the left side. That is standard. You made a crucial error on the red line because you did not install the insert which helps with compression. That's probably why you had a leak.

Can we set the alarm for bulleyes leveller as well?

Is this the only one that has digital bulleyes leveller available in the market?

This video was so helpful! Thank you for posting this 😊

Hello, we have followed all steps, but tank does not seem to filling

Tried this on a Lexus pearl white car. At first, brilliant results. Looked as good as new. Two days later, the yellow from the microfiber cloth showed up on the bumper.

This was one of the best instructional videos I’ve seen! Thank you for a detailed step by step instruction. I am confident I can do this install after watching your video. 5 days later: Just installed my RO unit and followed your video step by step. Perfect! I appreciate you so much!!! Thank you!

めちゃくちゃ分かりやすい👍

Funny this will be a thing of the past with newer printer I was going to try this with a brother ink cartrage and the chips are recessed also have a toner printer that I am attempting to re-fill

Thanks for this video! Got right to the point !

OK, so your video is no good for me because I have yellow black purple, red and black wiring and yours just doesn’t do anything for me

how do I know if we need to change the oil please?

No before and after video? Straight to the KZfaq gulag for you buddy!

😊😊😊

Great video and info about this canister filter. I've been trying to decide on which one to get and I like the ease of setting up and cleaning this one. By the way you have a great soothing voice that's easy to listen to and understand. Your tank looks amazing. The plants are incredible. Do you use any additives or fertilizers to help them look so wonderful? The only thing I would add is with the other brands of canister filters I've used, I've always rinsed the filter media in tank water which preserves any beneficial bacterial that are present. Excellent video. Looking forward to watching more. Now a new subscriber.

Does the mask develop out of the black backer? I don't get it.

Is it compatible with marshall major 2?

AHHHHHHHHHHHH THANK YOU SOOO MUCH , on the way to the hardware store right now

definitely having that issue with stormwash. I had a leak and couldnt figure out where it was coming from. so I ran the dishwasher in the middle of the kitchen and sure enough watched the water come out of those air holes. there is no fix for this then hey?

Thanks for the video! Just saved a lot of time and money being able to fix this myself. Did notice the only way I could pull the 4 wires out of the old pulley easily was to break open the old one like you did. Great step by step - thank you!

My Samsung bulb is very dim, but now i know both what base to look for and the wattage so i can get a brighter bulb, preferably LED. Thank you!

Does anyone know how to remove the snack tray from the bar??? I like having the bar but don’t want the snack tray

i cant get the chime to sync with my doorbell please help

mine too, it turns off when I press the 2 button together.😢

Thanks for the video, ended up being way easier to do than I thought it would be.

LED’s are not neon🙈💩.

Can it ride throught puddle?

How long hold one batteri

How fast?

Do you know if this dishwasher model needs salt? I can’t find the deposit for it 😢

Worst door handle design ever

কিভাবে অর্ডার করবো

Hey thanks for the video it was very informative and better than most I've seen seems to skip over a lot of steps and always happens to be the stop looking for. I did everything the same way but now pull string to turn the fan on and off and change is really hard to pull like if it's stuck on something or not aligned right when it looks like it's lined up where supposed to be. It pulls okay where it comes out the inside of the fan but from the bottom of the chain it is really hard to pull it like it's getting caught on something. But if get a chance and have the time to help me out and maybe let me know what I'm doing wrong would be very appreciative thanks a lot I'm definitely subscribing to ur channel did you check out other videos you have that I might need help with, you seem very patient and actually take your time explaining each step. I don't know if you're a teacher but you'd be a good one. Like I said before every other video I watched they skip over the step I'm trying to see so the video bypasses that part so then I'm trying to pause and rewind to see if I can figure out what they did. In my opinion there's no point of making and posting a video if you're not going to show each step and explain it in detail instead of rushing through it, I get some people no more and pick up things faster than others but if going to teach somebody teach them right and go step by step so they don't have to search 20 other videos of basically the same thing people skipping over the section u need help with and the whole reason ur looking up video in first place. I'm sure everybody has trouble with different steps. I am sure you're not told enough but thank you for making these videos to help people they are very appreciated just taking the time to do it with how hectic life can be sometimes

This was helpful :)

Is the stroller too tall for someone who is 5’3