That's one heck of a project, Nate. I actually learned a ton and considering the same. Thanks for sharing.
@pmillner3373Ай бұрын
Keep the videos coming!
@AngelNumberZeroАй бұрын
The fact that you dont need any special tools to tear these engines completely down is mind blowing!!! Im definitely going to start workin on skis instead of dirtbikes/ quads😂 Definitely seems less stressfull.
@zachdizАй бұрын
you ever finish it?
@leonardburkhard812Ай бұрын
Hey Sir, does I still Need the oem rev limiter when I use the sbn 44 carb instead of the bn44?
@iiiilaliiiiАй бұрын
What did you clean the bottom end cases? How did you do it? This video is helping a lot btw thank you!
@mattsmobileautodetailing2 ай бұрын
I have a stock 1998 JS550 that starts right up when cold but dies after 15 minutes of riding. Then just cranks over, but won’t start until you let it sit 15 minutes. Rebuilding stock carb didn’t change anything. Planning to do a compression test & check fuel lines tomorrow. Any suggestions?? Thank you!
@jaimemaisonet35962 ай бұрын
Awesome you have to remove propeller from housing
@michaelmalecki76042 ай бұрын
What size wear ring did you use?
@LIVNLRG2 ай бұрын
What did you cut the center boards between the bunks at? That looks to be the perfect width.
@simon47793 ай бұрын
Hi, did you do a trip around New Zealand about 10 years ago, did I go mountain biking with you? Palmerston North, Simon
@andrewwinn7833 ай бұрын
I’m missing my nasty Nate videos
@NotNormalNick4 ай бұрын
Daaaang that clean 94 550sx in the back! 3:04
@katluke4 ай бұрын
What are the torque figures for the various bolts ? Thanks for your reply
@UA10i124 ай бұрын
did u get it to flip?
@_Eisner4 ай бұрын
Hey great series! I have the same ski with the same issue. Installing it all tomorrow so hoping for the best! Would you be down to do a follow up video on how yours performed? Thanks!
@cub10095 ай бұрын
Gotta love the sound of a 2 stroke. Nice work
@XplorinWithPaul7 ай бұрын
Why u give up on it?
@jodyholcomb37389 ай бұрын
Would you want to sale it I'm in Hillsboro Ohio I'd give you 200 if it runs no more than that
@jodyholcomb37389 ай бұрын
On the key ignition switch thang u can take a flat screaw driver to start it just put it on start an if it's got a bat hold in front b reak. An put flat s drive in on key switch thang an turn it over an it will start has to do that on mine.
@brentspepper208710 ай бұрын
Do you want to sell that 70?
@mr.penguin766211 ай бұрын
I would say dont cut out the more specific break downs on how to build up and attach everything. Its nice to watch too, and/or helps people learn.
@philipolah727911 ай бұрын
Cool Video and Good find -- your 70 even has the spark plug tool on the back under the grab handle ! I have had many 70s but only got one that still had the original spark plug socket tool - they usually missing. Hope You get it going again 😊
@motorizedbikesar7000 Жыл бұрын
WOW dude, you have a long way to go and a short time to get there.. just keep us posted on how many more scooters you are going to grenade.. I'm highly unimpressed.. you should have torn into the transmission housing WAY WAY before you even put power to that starter.. so, um.. uhh.. umm, yeah.. you are a danger to scooters all around the globe and you need to put down the screwdriver and walk away slowly.. please!!
@shannonstiles9838 Жыл бұрын
🇺🇸🤙🏽
@alexc977 Жыл бұрын
We miss the series, need an update brotha!
@whowho7969 Жыл бұрын
The video should be clapped out gasket sealer 👍
@thediplomasta5891 Жыл бұрын
Depending who you ask, its either called a "reverse gate" or a "reverse bucket".
@briankeeney9272 Жыл бұрын
I’m not sure if you check your old videos, but what would you guess one of these motors weigh intact with the pump? I’m considering buying a bombardier to repower a different toy and can’t find a weight listing anywhere.
@d-r-m-c9384 Жыл бұрын
the block with head and carb plus engine plate is about 50-70lbs is my guess, im working on one right now
@samohtnotslar Жыл бұрын
It will run but 120 is worn out, should put new rings at least and hone it
@user-yl6xm5ry2c Жыл бұрын
What's the dimensions? Great video but no measurements listed?
@Smokaholics Жыл бұрын
Hey! Late comment but did you buy a new neoprene seal to put on the housing after or did you reuse the old one? Thanks
@michaelhernandez2647 Жыл бұрын
hi i have a same kawasaki, is it normal for it to smoke out the tail pipe?
@doublem6027 Жыл бұрын
Part 12?
@Jacobskibros Жыл бұрын
Turned out sweet. It must have been tough to ride with backwards steering. It would be interesting to know if it's very good to ride just ripping around not trying to jump. Looking forward to seeing another video.
@zachrnadaoplh8049 Жыл бұрын
The engine wasent getting fuel that’s why the engine turned over but didn’t start
@jeffreyyankee9714 Жыл бұрын
Nice drone shots!
@jasonwoolard1886 Жыл бұрын
Super smart person.. great job
@jasonwoolard1886 Жыл бұрын
Fiberglass needs to be faired/primed/ painted.. keeping water out
@liltom5037 Жыл бұрын
If I ride mine 2-5 times a month, just through the trails and in a field, no racing, nothing hard, how often should I change my oil
@rjmx250 Жыл бұрын
Idk for his model but i have a 2011 and if you aren’t racing or riding it super hard then every 15 hours becasue thats what the manual says but it sorta depends
@BeagleFerretTime Жыл бұрын
Is it a situation of will "it flip", or "can you actually flip"? Not trying to be butt, but have you ever done a flip on a ski?
@Smelvin78 Жыл бұрын
How often do u have to do this?
@BigZu423 Жыл бұрын
puppy wants to play bro lol
@rebelrog Жыл бұрын
So uh yeah, I'd like to see, uh yeah, a part 2 also. So yeah, I'd like to see how it came out. And yeah, in a 17 minute video you, uh yeah, said "yeah" in some form 21 times. Not counting the two times you used it properly in a sentence. So yeah, I just thought I'd point it out so you'd realize how often you use it. So uh, yeah.
@louiskeatley2323 Жыл бұрын
That’s not a west coast motor lol. West coast manufactured a motor, they coast around 4-5k if you can find one. Head, cylinder, and the way to the flywheel.
@fatimama6791 Жыл бұрын
Cool. I learned from this.
@ArmandoSanchez-yh3qy Жыл бұрын
💪🏻💪🏻🤟🏻🤟🏻
@ArmandoSanchez-yh3qy Жыл бұрын
Yesiirr
@put301 Жыл бұрын
You need thicker jump cables there to much resistance