I will mount it on my golf gtd, I have different thoughts when it will arrive, when I want to mount it I am ashamed because it will look bad because it is not R but gtd. I also bought a splitter for the lower front, tomorrow I will probably get to work, I hope I will not break anything 😆, thank you for the video
@BMWSUPERCOOLАй бұрын
What diffuser is that?
@ggzii3 ай бұрын
How do you place it down? I'm worried I place it wrong and I cant relift
@Maceej3 ай бұрын
What glue is best to use ?
@user-iw2yy6iq4n3 ай бұрын
Also you can piss off all the adhesive tape and replace it all over with gorilla extra strength tape
@user-iw2yy6iq4n3 ай бұрын
Is yours onyx white? Mine is looks awesome
@laurensvanderdrift34127 ай бұрын
What sealent did u use?
@adamcohen96 ай бұрын
Sikaflex adhesive
@stillTK7 ай бұрын
Can you take the spoiler back off if you wanted to sell the car, for example?
@chloeleedow72507 ай бұрын
Definitely the best looking spoiler for these cars. Keen to get one on my 2020 R final edition. Think it was an option from factory perhaps I nearly brought one that had it from new but missed out. Haven't checked yet hope you left your link cos you sound Aussie and so am I 😊
@leonb33279 ай бұрын
You needed abit more blue tape to hold it down
@adamcohen99 ай бұрын
Yeh few more rolls of it should have done the job
@Bfl8x9 ай бұрын
How’s the car been?
@Dylan-7R10 ай бұрын
Awesome video thank you! Glad i have a black R so i dont have to worry about the different coloured line so much 🤣
@chloeleedow72507 ай бұрын
I got a white but so much black on it including moonroof black so I'm happy to go black keep the two tone going lol 😂
@piotrwilus534010 ай бұрын
Such a beautiful car! Are you planning to replace the front and rear badges with the black ones?
@alexkay782310 ай бұрын
Is that spoiler still attached to the car?
@adamcohen910 ай бұрын
Yeh mate hasn’t budged
@Wargwarn11 ай бұрын
Bit over the top with the tape
@antoninoiraci2936 Жыл бұрын
Che flessibile hai usato
@regtalkswealth Жыл бұрын
Yep I can confirm this man knows what his doing he put that proper sealer on there great tutorial
@eluus1ve Жыл бұрын
Do you know how thick the 3m tape you used was?
@adamcohen9 Жыл бұрын
Not sure, it was actually supplied with the spoiler when I got it. But it was pretty thin
@user-sq5er4dz7u Жыл бұрын
Hi! Do you use an automatic car wash?
@adamcohen9 Жыл бұрын
Rarely, but if I do I use touch free auto car washes
@johnrambo4581 Жыл бұрын
Has it flew off ?lol
@adamcohen9 Жыл бұрын
@@matroksu haha good luck mate
@monnstaah5031 Жыл бұрын
Does it matter what tape you use to hold it down?
@dubhaus Жыл бұрын
Great video Adam! Please let us know if you need anything else for your car 😁
@sam7765 Жыл бұрын
Great video bro. U know u sound exactly like Norton from big lez 😂
@yujock Жыл бұрын
What adhesive did you use besides the 3m tape?
@adamcohen9 Жыл бұрын
Sikaflex adhesive
@elpaparaxy Жыл бұрын
Can you tell me the name of the glue that you used?
@adamcohen9 Жыл бұрын
Sikaflex adhesive
@a8_american121 Жыл бұрын
Tried shipping it to my house but i guess they don’t do over seas
@IViftyhands Жыл бұрын
Which exact diffuser did you go for , curious because I’m looking at some myself
@IViftyhands Жыл бұрын
@@adamcohen9 Thanks!
@toecap1445 Жыл бұрын
You dont compare with expresso machine like a breville that make your coffe in seconds, with dual wall filter you dont need skills. The time you save is one minutes a day for a lower quality coffee.
@defatgames27968 ай бұрын
Enjoy taking apart and washing your espresso machine every day... I'm sure that only makes a minute of difference 🤣
@user-iq2se1vo7e Жыл бұрын
Which Sikaflex did you use?
@adamcohen9 Жыл бұрын
From memory it was this or similar: www.bunnings.com.au/sika-290ml-sikaflex-118-extreme-grab-construction-adhesive_p0131775
@user-iq2se1vo7e Жыл бұрын
@@adamcohen9 thanks legend
@tomaszgawin7685 Жыл бұрын
No bolts? Wow
@adamcohen9 Жыл бұрын
No bolts! It’s holding up well, no issues whatsoever
@michaelgilligan165 Жыл бұрын
Anyone installed these with just tape and it does the trick? If anyone wants to steal it I dont want to be left with adhesive markes on the paint and yes it's happened me in the past with an old car 😔
@TheJaceyBoy Жыл бұрын
Did you use the small tape they supply and mastic?
@adamcohen9 Жыл бұрын
Yeh I used both - had no issues with it at all so far!
@faln3459 Жыл бұрын
What’s the best way to take one of these off mate? Mines damaged so I need to replace it
@adamcohen9 Жыл бұрын
Not sure mate never looked in to it - depends what you used to stick it on as well
@lapizbluee Жыл бұрын
fantastic video mate! was this an original oettinger or a oettinger style. gonna do this very soon. thanks
@adamcohen9 Жыл бұрын
Thanks mate! Oettinger style replica! Link in description to the one I got. No issues with it since the install! Whichever you get I think it makes the car look way better! Good luck
@Holliana8647 Жыл бұрын
Good video thanks
@bossman1744 Жыл бұрын
Is this from zerooffset?
@ciarancourtney611 Жыл бұрын
where did you get the spoiler, i’ve bought my second oettinger style spoiler and it doesn’t fit 🤔.
@dylanyoungs8313 Жыл бұрын
It's what you have to expect sadly if you buy a 'style' spoiler rather than the original part. They are normally reverse engineered so will almosts always not fit correctly
@adamcohen9 Жыл бұрын
I got mine from this company. dubhaus.com.au/product/oettinger-style-mk7/
@JoeSmoe1 Жыл бұрын
who cares if its real, it look great
@chuwmumamark28482 жыл бұрын
please can you put the link of the things you used in the description
@chuwmumamark28482 жыл бұрын
thanks for the explanation big man. ill get one of this right away
@chuwmumamark28482 жыл бұрын
also you had blue tape but then when you put them on, it change to red. did you change the tape?
@adamcohen92 жыл бұрын
@@chuwmumamark2848 hey mate no worries! the red tape was 3M tape that came with the spoiler. I used strips of the 3M in addition to the sikaflex adhesive to stick the spoiler to the car. The blue tape I only used to hold the spoiler in place as the sikaflex (with the 3M tape) dried and created a strong bond to the car. So that’s why I removed the blue tape the next morning.
@anony-mousex2 жыл бұрын
7:15 gap is because you bought fake Oettinger - the real thing fits perfect
@chuwmumamark28482 жыл бұрын
@@anony-mousex how much does the real one cost. I'm seeing £190 on the net. I've got a golf r 2019 and i would love one off this spoiler
@69maf Жыл бұрын
Exactly, I sent fake one back , absolute junk. Only way is get the proper One but there not cheap! 😁
An interesting video and a clear explanation of concussion
@adamcohen92 жыл бұрын
Thank you! Hope you enjoyed :)
@cat-a-tonic1502 жыл бұрын
Thank you. I have a traditional espresso machine (Gaggia Classic Pro) but mostly I use capsules. I've tried several formats, finally settling on two - Nespresso (using a Breville Creatista Plus) and Illy's Iperespresso (using a Gaggia for Illy "cube"). To me, the Iper system tastes more like traditional espresso. The crema is real (I think Nespresso injects air to create the appearance of crema whereas the Iper system just relies on pre-infusion). Unfortunately, Iper capsules are more expensive, the selection is limited and I don't believe the capsules are recyclable. On the other hand, there are now many choices of Nespresso-compatible capsules since the format is no longer proprietary (even Illy has them!). And, as for pre-infusion, I interrupt the pour on my Nespresso machine which, I believe, improves extraction. Finally, I've read that espresso machines reduce the pressure to 8 or 9 BARs during the actual extraction so higher pressures may not be significant.
@defatgames27968 ай бұрын
The original Nespresso machines don't use air they use pressure the same as an espresso machine. It's the vertuo machines that use air/spinning to create foam.