So...I'm screwed if I want it 11 cards thick?.....
@SandyHuntressКүн бұрын
If you can add, you can make any thickness you want. Stack together fives and sixes, and there you go, 11. 😀
@gillianlee85145 күн бұрын
I just bought one and I agree with you. It doesn’t close the loop all the way but it’s still a great tool. Did a chain link in an hour which would have taken at least 2 hours.
@SandyHuntress5 күн бұрын
👍🙂
@itaomahony5027 күн бұрын
I’m not surprised the liquid clay is the best, no brainer really as the sculpy is made for the job specifically. Use it all the time.
@SandyHuntress7 күн бұрын
True! I wasn't surprised either. 😃
@jessicareyesaliaga8 күн бұрын
Hi, great video. One question here, when you put the clay in the oven, nothing happens to the Crystals? And what about the metal. You put all together in the oven? They stick one with the other?
@SandyHuntress8 күн бұрын
The oven is at such a low temperature that it does not affect the glass or metal. Glass melts at around 1500°F and metal at an even higher temp, so no worries about baking them at 275°F!
@jessicareyesaliaga8 күн бұрын
@@SandyHuntress thank you for your answer. I will send some images of my projects!!! 😊
@Angela-jl7pg9 күн бұрын
Are the coil ends supposed to be smashed flat? I thought they were supposed to stay round but maybe Im wrong. Please if you can clarify🙏
@SandyHuntress9 күн бұрын
Yes, you have to squash down the coils. That’s the only way for them to hold onto the cord. You can just flatten the end few coils, but the more you flatten the more secure the hold will be.
@EriAikawadiary12 күн бұрын
This is what I’ve looking for! thank you! I wonder if i could make a mold from a barbie boots and make it into keychains. i’m worried that the hole in the boots would be quite difficult to make a cast.
@SandyHuntress12 күн бұрын
I don't know that polymer clay would be the best material for a shape like that. The deep hole would be problematic. Or you could try making a mold with pourable silicone, then use a pourable materials to make a cast.
@EriAikawadiary10 күн бұрын
@@SandyHuntress thank you so much for your insight! I was debating on silicone molds and resin. but I heard resin is toxic? I might make the holes of the boots a little shallow and maybe stick a peg in it and also use a peg in the cast while I mold the boots. does that make sense?
@sharonwalruff329812 күн бұрын
Thanks for the info. I worry about just a magnet like you didn’t recommend. I certainly would be wary if I had something expensive like a diamond or gold!
@SandyHuntress12 күн бұрын
Right! 😱
@LindaLRosario13 күн бұрын
Thank you for the tip!!!
@SandyHuntress12 күн бұрын
You're welcome!
@kathyw14123 күн бұрын
10 ply thread with what needle
@SandyHuntress23 күн бұрын
You need a needle with an eye that will fit the thread, a tapestry needle works well here.
@debbeechy26 күн бұрын
Thank you! Glad to see you back!
@SandyHuntress26 күн бұрын
Thanks, Deb! 🤗
@debbeechy26 күн бұрын
This is so cute. Thanks so much for the video.
@SandyHuntress26 күн бұрын
Glad you like it! 🙂
@kenniesmith797827 күн бұрын
Instead of mixing the powder in the clay, have you thought of brushing then on your clay? Especially matching the color of the powder to the color of the glow in the dark clay? You may get a different result.
@SandyHuntress27 күн бұрын
Very good idea! There are so many different ways to approach things, and as you say, often different results. 😃
@SandyHuntress28 күн бұрын
It's been so long since I published a video, my apologies! If you need more polymer inspiration, but sure to check out my Polymer Clay Sculpting playlist. kzfaq.info/sun/PLg8Lpg6u0akgkKetr99yX96SgbaME3dRI
@user-vt3zc9qz6z29 күн бұрын
I need
@SandyHuntress28 күн бұрын
Ok
@syndyleadmon4455Ай бұрын
Wow I just was taught two ways to use a crimp with an eyepin and on the stringing wire. Just amazing! How have I not seen these tutorials before? Love them. I'm a fan now for sure! Thank you for sharing 🤗 Syndy
@SandyHuntressАй бұрын
You’re very welcome, Syndy. 🙂 Hope you found the video helpful!
@theartisancompanyАй бұрын
Great ideas! TFS
@SandyHuntressАй бұрын
You are welcome, glad you like it!
@gailresources3970Ай бұрын
The two bracelets on your cover for this great video are exactly what I’ve been trying to find a tutorial for. I’ve found myself stuck in a rut with my duos. Might you know of a tutorial I can buy? Especially for the more narrow one. I may be able to figure out the wider one. Happy to see you are back. Life can really put the brakes on. 🌸
@SandyHuntressАй бұрын
The wide bracelet is a Deb Roberti pattern: www.aroundthebeadingtable.com/Tutorials/Berry.html. Actually, most of the patterns are linked at the accompanying blog post keepsakecrafts.net/blog/2016/12/16/superduo-seed-beads-friday-findings/
@im10giАй бұрын
Thanks for the help gotta get some of those pliers 🫶
@SandyHuntressАй бұрын
You are very welcome. 🙂 Happy creating!
@janomalley24Ай бұрын
Thank you for this very instructional video. Good to know it's best not to use on cotton as I was planning on using mine on the end of cotton clothesline rope in my bowl making. I'm nervous to use a flame on the rope!
@SandyHuntressАй бұрын
Thanks for letting me know you found the video helpful, Jan! 🙂
@debg939Ай бұрын
Contact Makins if they don't fit & they will send you ones that do fit.
@SandyHuntressАй бұрын
🙂
@chrystalyenger7356Ай бұрын
❤❤
@SandyHuntressАй бұрын
🙂
@MeaganEaterАй бұрын
My cellphone screen keeps falling off. I am going to use E-6000 to glue it back on. your video was an awesome video. I will use the toothpick like you and paper, so I do not goop to much on my frame and back of the screen.👍
@SandyHuntressАй бұрын
That should work!
@BethAbustanАй бұрын
you could have taken off the bracelet after you tied the first knot to try it on and make adjustments
@SandyHuntressАй бұрын
Hmmmm, maybe, but it's still going to fit differently with the thickness of the knotted cord added.
@Harshita6Ай бұрын
Thank you so much for this video. It was much needed😊
@SandyHuntressАй бұрын
You are very welcome! 🙂 Hope you found it helpful.
@jbee6954Ай бұрын
Any tips how to get the needle back in the tube? Its nearly impossible.
@SandyHuntressАй бұрын
Find someone with really good eyesight and dexterity to help you? 🤣
@oaktree1628Ай бұрын
How about using a folded piece of paper or a folded index card to help you guide the two separate pieces back together?
@SandyHuntressАй бұрын
@@oaktree1628 Hmmm, I can't quite picture how that would work.
@oaktree1628Ай бұрын
@@SandyHuntress fold an index card, then open it up until it forms a “V”, then put the tip of the nozzle inside the “V”, then guide the needle cap into the nozzle in the “V”
@brendafreeman8714Ай бұрын
Thank you for sharing What size can I use for beaded lanyards please ?
@SandyHuntressАй бұрын
I’m not certain, as it’s not something I’ve ever made. I’m sure you can find the answer by doing an online search.
@user-sv7lp3vc1gАй бұрын
hi Sheree Texas
@SandyHuntressАй бұрын
🙂
@desiertoscacti5388Ай бұрын
Thank you Sandy for the exciting product video and instructions!
@SandyHuntressАй бұрын
You are very welcome! Happy creating. 😀
@lindahutchings5394Ай бұрын
Thank you for sharing what you can do with this tool. I bought it for some straps to go on a crocheted backpack. It worked great!
@SandyHuntressАй бұрын
Great idea! Thanks for letting me know you found the video helpful. Happy creating 🙂
@marym4092Ай бұрын
You are off camera....
@SandyHuntressАй бұрын
Sorry 😞
@Charmainejay2 ай бұрын
Hi which glu is good to use on polymer clay. The glue needs to be strong enough to use outdoors please?
@SandyHuntress2 ай бұрын
Did you watch the video? I explain it there.
@Charmainejay2 ай бұрын
@@SandyHuntress So sorry just noticed it was posted 5 years ago. So sorry to have disturbed you. I think super glue would be my choice. Kind regards.
@NanamiKairyu2 ай бұрын
Thouse copper clays are not really available now to buy. So silver is better
@SandyHuntress2 ай бұрын
You can buy them online, Fire Mountain Gems has a selection available.
@paulrowan44212 ай бұрын
Hello. This is great, but I see a problem: the gaps in the smaller washers. Hair might get caught in there. Probably would. i did not see any step to close that small cut. Do you press the circle closed to close the gap? Soldering would be really difficult, and mess up the look. Could a drop of glue be put in the gap, and sanded down to be smooth?
@SandyHuntress2 ай бұрын
The best way to close it is like you would a jump ring. if you can wiggle the cut ends to meet tightly the jewelry should be secure.
@melindalacatus57222 ай бұрын
Beautiful work, thank you!❤️❤️❤️❤️
@SandyHuntress2 ай бұрын
You’re welcome, happy creating!
@bottlebass26332 ай бұрын
this video cleared a lot up for my jig and being a newbie, the cobra was the first one i learned 😊
@SandyHuntress2 ай бұрын
So glad to hear you found the video helpful. 🙂 Happy creating!
@perezpaulino87152 ай бұрын
Hi! I love your tutorial channel. I would like to make a replicate of this bracelet. Is it possible?... if it does, so where I can get the beads. ( it will be special gift for my two nieces)
@SandyHuntress2 ай бұрын
I made this video quite a few years ago, so it’s doubtful that all of the same beads are still being sold. But I’m sure you can find similar ones to make your gifts for your nieces.
@mawi11722 ай бұрын
This is so fun to do. ❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@SandyHuntress2 ай бұрын
🙂
@user-rp9bo2rh8n2 ай бұрын
Fantastic
@SandyHuntress2 ай бұрын
Thanks 😊
@cherylulakovic86132 ай бұрын
Great ideas.
@SandyHuntress2 ай бұрын
😀
@husnahyusuf32642 ай бұрын
How many gram's of copper should i add in each gram of 24 carat's to make it 14 carat's rose gold plz....de calculations plz madam
@SandyHuntress2 ай бұрын
I have absolutely no idea. That’s something you should Google for yourself.
@smokey21442 ай бұрын
I know this is a year old but in case you come across this video like I have sharing what I’ve experienced; Art Clay Copper works great with a torch for smaller pieces. The other brands I’ve seen disclose kiln only.
@SandyHuntress2 ай бұрын
The package I used was labeled for torch firing up to a 25 gram piece. My pieces were much smaller than that, I’m guessing my torch wasn’t powerful enough.
@artpoemsbysaloumehsallysal70432 ай бұрын
Absolutely beautiful ❤
@SandyHuntress2 ай бұрын
Thank you! 😊
@Toltecgrl2 ай бұрын
I bet if everybody sent sculpey a message on social media, they would start making them again.
@SandyHuntress2 ай бұрын
Eh, probably not. Companies usually have sound business reasons for continuing/discontinuing products.
@ronsonized2 ай бұрын
this was so helpful, thank you! i couldnt figure out how to get it to stop leaking!
@SandyHuntress2 ай бұрын
Happy to help! 🙂
@giftedsoul7772 ай бұрын
I discovered this resin recently and I am thinking about giving it a try since it's non toxic. Alot of other resin companies claim that though , but I definitely believe that this brand is a good alternative to those that have concerns regarding safety. Thankyou for the review!
@SandyHuntress2 ай бұрын
You’re welcome! ☺️
@dandelion12392 ай бұрын
Awesome bracelet. So so pretty!! Very creative. Thank you!
@SandyHuntress2 ай бұрын
Glad you like it! 😊
@francinelevert31173 ай бұрын
Black matte beads may be jet.
@SandyHuntress3 ай бұрын
True, but these ones are glass.
@BarbaraYanny3 ай бұрын
Did not answer any time before use to set up and use. 😊
@SandyHuntress3 ай бұрын
Not sure what it is you are saying. 🤷♀️
@thuaners3 ай бұрын
very clear and concise instructions, thank you!
@SandyHuntress3 ай бұрын
You’re very welcome. 😊 Hope you found the video helpful!
@MrsRanchoFiesta3 ай бұрын
Aluminum foil! Brilliant! I've been using floral foam, meticulously "shaving" it to fit inside the cup, poking in realistic looking artificial succulents. I'll try foil "filling" with a layer of foam on top. Thank you 😊