All due respect, the device did work as designed: to get you on paper at 100yrds. But you want one that zeros at 200yrds. And your actual zero is also dependent on your caliber and cartridge so this is not a "universal" zero.

What rifle you got it on?

The scope needs to be in a natural eye relief with your shooting position. Depending on your receiver rail, the scope and mount will have to shift accordingly.

100%

The samples I got came through Amazon so it's not likely they would have conspired with Amazon to only ship their good one? Not in this case but in other videos I've gotten defective samples. I contact the company like any customer and ask for a replacement. I do mention that in a past video where the reticle wasn't aligned correctly, I forget which video.

Thank you for pointing that out. Can you explain why that's the problem? Should that make any difference for for testing the turret tracking, glass sharpness, etc?

@@MoondogIndustries I think if you ask most scope manufacturers where they recommend mounting the rings it would be as near to the center of each straight portion of the scope tube. That’s the area that is least likely to interfere with any of the scopes internal mechanisms, especially if the rings are “accidentally” over torqued! I saw your Shot Show interview with Mari at the March booth, she would have set you straight if she had seen the picture! 😎 Also I have one of the EP-5’s and while the glass is not bad, it’s not very robustly built scope. Right after I mounted mine, I stood it against the wall and late fell over, into a carpeted wood floor and it knocks the elevation turret completely off! Apparently it’s only glued on! They’re fine for a range/target gun but they’re way to dedicate to trust on a hunting or personal defense gun. IMO 👍 This might be instructive! marchscopes.com/wp-content/uploads/2021/05/Torque-rev.pdf

@@MoondogIndustries look at this. marchscopes.com/wp-content/uploads/2021/05/Torque-rev.pdf

@@MoondogIndustries Respectfully, the fact that you don’t know why it’s a problem, is the problem. In other words, you don’t even know what you don’t know! Yet you keep putting out scope reviews! IMO, you need to revisit the basics of scope construction and mounting before posting any more videos!

That's surprisingly weakly built scope. I would not fault you for being upset. To be fair, the EP-5 is marketed as an entry level or budget ELR scope so folks indulging in that sport generally aren't taking them into combat. That said, many NRL shooters also bang these up in competition with out issue.

They have a couple of different reticles now. Did you buy the CM2 or CM3

@MoondogIndustries I bought the CM3. It has 6 hash marks below the dot. No printed material indicates measurements and therefore Strekok Pro cannot add the reticle to the database.

@@BourbonPrepper Their webpage says the CM3 is a BDC calibrated out to 700yrds. So I'm guessing the marks are 700yrds, 600, 500, 400, 300, 200 repectively?

@MoondogIndustries That's a guess though. There's no documentation of it beyond their vague statement. Companies like Leupold and Vortex always state what the marks mean. I wrote them and hope they respond.

That's why it'll never be 100% zero. But it'll get you on paper. Just don't force it closed.

There's no photo of the box in Amazon as I recall. But read the Amazon description of the item, the stuff is in there.

I know, right? That's the biggest thing the flashlights brag about. But most reviewers don't know how to test lumens so I guess they don't bother doing that in their vids?

That is a big handgun. But yeah, these headphones only reduce noise by 22-24db. If the original noise is over 110db the reduced sound is still too loud for safety.

No. Almost all red dots use a coin battery.

Hope you enjoy it! They are gorgeous.

Thanks for the sub!

Laser bore sighters are only intended to get you on paper and save ammo. Not to be a precise aiming device. Chamber laser I've ever seen is that precisely made.

Fixed it youtube.com@Hazzbro1964

Sorry wrong link in the description: Enter to win a CVLife Bearpower 6-24x50 scope at moondogindustries.com/cvlifecontest I think I fixed it. You have to load 1 screen shot at a time per form. Then reload the page and fill it out again to load the next channel/screen. That's the only way I could make sure you got more than 1 entry.

Much appreciated

Razors to be so overrated by users. They don't know what they're missing because they haven't tried any other brands.

Because the pad is naturally forked at the top to allow for the front sight post. It inserts more easily this way. But you can do whatever works for you.

When I filmed this all of the ranges in my area were closed due to COVID. A few months later, I made this video with this rifle. kzfaq.info/get/bejne/eqeHf5Sa0a_Rl4E.html

Look at the date of this video. When I made this video all of the ranges were still closed because of COVID. A few months later, this kzfaq.info/get/bejne/eqeHf5Sa0a_Rl4E.html

Thanks for the post. Always much appreciated.

Indeed

Welcome aboard! Check out my contests for subscribers at moondogindustries.com/contest

As they say, you don't need a thousand dollar scope...until you need a thousand dollar scope.

Thanks. Hope you subscribe.

Probably won't be giving me any FN swag at SHOT next year.

@@MoondogIndustries They can keep the swag! LOL! I must say though that the .308 JAKL is quite lovely. I wonder if you can do a barrel swap for the Fury round...

@@olternaut I'd be shocked if PSA didn't already have a couple Fury chambered prototypes ready for next SHOT.

Please do. We all want to know.

Did yours come with this free scope?

@@MoondogIndustries yes it did

@PalmettoStateArmory Yeah when?

Thanks for subscribing

Excellent! What make or rifle and tripod are you using?

I appreciate that!

I learned from the best, brother.

Why is WA trying to be more stupid than CA?

@@MoondogIndustries 🤷‍♂️