Hi there. Will this work on a 2024 Grand Highlander? But I don't want to use the cross-bars because I want the rack to just sit on the flushed roof rail. I just want to know if it's possible before I purchase one. Thanks in advance.
@luiscaceres8223Күн бұрын
wdf do you mean all three of them? the box only comes with 1!!!!
@luishdz49187 күн бұрын
Dust and moisture 😂
@eriknash8783Ай бұрын
It's clear to me now that Toyota didn't even put a rear bumper on these trucks. Just some useless wings on the ends pf the hitch. I can't even stand on the top of my bumper without the plastic crumpling. Also, the slightest amount of force against those end caps bends them right into the bed. Also a good reminder why to never purchase Go Rhino products because they are not actually designed and engineered properly. Trash!
@Adrian-jh5crАй бұрын
Just ordered this and i can't it together screw holes done line up it's impossible to put together for 1300 you expect this to work correctly. Wish I would've tread the reviews before I bought it. It's going back of I can't get it together by this weekend. Should've known there was going to be an issue when it didn't ship together! Took 3 weeks to come in.
@Scott_03Ай бұрын
17/32 drill bit! Really? Why not just 1/2 inch? I'm not spending $15 on one drill bit.
@Elitepred52 ай бұрын
Can anyone help I was pulled over because my bar blocks back up light is there way around this or no of a back up light install for the bar?
@alonzoduran9612 ай бұрын
It sucks
@emsmedic282 ай бұрын
Do these still come with the center support bracket??? From the site and videos, it looks like that has changed. Please advise. Thank you.
@johnwoodlock39892 ай бұрын
The video is way more informative than the instruction sheet.
@RicardoHernandez-zn6ki2 ай бұрын
Is the oem bumper for sale?
@JacobMoy-ij5om2 ай бұрын
Does this bar make noise when you drive down the highway with the light retracted? For like a TRX any info I would be great full
@kevinknesek4615Ай бұрын
If anything is going to make noise, it would be the lights not the chase rack. That being said, there are much better options for a TRX. ADD makes a chase rack with an actuator, and chase racks like the Armordillo can be modified to include one. These options will have a much stronger actuator to avoid light shaking and faster movement. I went the custom route for my TRX. Best of luck
@jamestemoney66803 ай бұрын
What size are those lights
@MarcoDong583 ай бұрын
Nice video but I wish you would have spent more time to show exactly how to disconnect the trailer lights socket.
@iceman201773 ай бұрын
Didnt seem like nutsert install worked very well with the one they include , video skipped over it pretty quick 😂
@featherspreaderinc31463 ай бұрын
Took five hours, lots of cussing. But, it's on the truck. The strong post build whiskey helped me get over it.
@Dieselpwr4 ай бұрын
$$$
@srstmss374 ай бұрын
Why do you send out instruction that are not the same as this video? Your written instructions that are included say to install the control module on the drivers side. This videos says passenger. The installation of the drivers side front of a 2022 Colorado find you removing all the connectors to the wire loom that is in the way of the motor. I see in these video instructions you omit showing drivers side installation. Is that because the front motor is a PIA? Photos and diagrams of the front motors in the written instructions are different. I wasted some much time doing this install. If I was paying someone to do the install, how much extra would they have charged me because of your crappy documentation.
@Suckonsum4 ай бұрын
We’re can I find the plastic end caps
@SirAJentz4 ай бұрын
Like the design, I'm not too sure about drilling straight down into bed rail! There should be an option for the inner rail instead.
@Doc18554 ай бұрын
I’m trying to find a set for my Tacoma TRD Off Road Double Cab
@torontoraptors21074 ай бұрын
Can you guys build a ladder connecting to the rack?
@Miasaint104 ай бұрын
I've invested a significant amount of money and time into my truck. Typically I do it on a good budget, but this time I decided to splurge on this sport bar and replace my $300 one. I should have left the $300 one on. It didn't come with useful hardware, manufactured incorrectly so nothing lines up, stripping out bolts. Wires are about 10 ft too short to get to the engine. No space to run these wires inside of the tubing like it recommends. They say keep everything loose until you set it in place, but it makes it physically impossible to get everything to line up correctly. And it actually resulted in me shattering my rear window (which I will PARTIALLY take responsibility for). I am not someone of a low skill set when it comes to these type of installations. I'd recommend you look somewhere else. The only way I would forgive this product is if they reimbursed me. You can save a massive chunk of money and still get a quality product elsewhere.
@edgbarrios895 ай бұрын
These do not fit perfectly on a 2023 gmc at4.. we did it with modifications on my buddies truck. But I would not recommend
@cyclest93004 ай бұрын
what type of modifications ??
@plexiform19735 ай бұрын
Would be really great to see a detailed installation video really going into how to route the wiring from battery to lights and how to get the switches in the dash. And how to connect multiple lights to the same switch without having to run a bunch of wires the entire length. The holes are too small fit the wire connectors through. This bar has a very sturdy build quality but the designers did not pay close attention to details regarding how to make wiring through holes and bars easy. For the $$$$ being asked for this bar it needed to be better designed and also come with MUCH MUCH better instructions.
@mrs_tink5 ай бұрын
Just got mine yesterday, can’t wait to get it on my gladiator
@FGCScrub5 ай бұрын
Hi can you use the basic rotopax mount on the roof rack or do you need a plate to mount it on?
@Terminator_T-X36 ай бұрын
Are you able to have a cover for the truck bed with this?
@plexiform19736 ай бұрын
You didn’t retract the lights all the way…are they able to go all the way down?
@GaryV166 ай бұрын
What lights are those?
@TroyL8246 ай бұрын
Horrible product. DO NOT PURCHASE!! Mine arrived with no hardware, chipped powder-coat and broken pieces. I’ll never buy a Go-Rhino product again.
@plexiform19736 ай бұрын
does this work with the retrax pro xr bed cover? Is it possible to use the T Slot rails to mount the sport bar?
@torontoraptors21076 ай бұрын
Pls build also an easy installation rear window ladder designed to connect to the srm roof racks-
@minJa-mo9ke6 ай бұрын
Can I take it as I please?0.02
@Texas770736 ай бұрын
What part number are the Q series light for rollbar?
@kriswibbenhorstermeister98856 ай бұрын
Just want to add my experience with this bumper and comment on the ending of this video. The video ends with the guy telling you, the LED lights will need to be hardwired in to replace your license plate lights, but they don’t show you where the license plate lights will then go, because there are no license plate lights on this bumper. None. The OEM bumper has license plate lights on each side of the plate, but the Go Rhino bumper does not. You will need to cut holes in the bumper and fabricate some sort of apparatus for those LED bulbs to go. I taped up my incandescent lights behind the bumper and I’m having to figure out some sort of aftermarket license plate light solution. This is ridiculous. Go Rhino should state this on their site but they don’t. I specifically asked about license plate lights before I made the purchase and the salesperson told me there were license plate lights. I assumed that meant the bumper had lights as a part of it. It doesn’t. Buyer beware.
@jeffmiller40537 ай бұрын
That would be cool for a undercover cop truck
@jgarcia238ify7 ай бұрын
How does the rivet atay in place. I cant grasp whats going on lol
@jgarcia238ify7 ай бұрын
How does the rivet stay. Thats my only struggle to comprehend
@user-kd6yj2kg8h7 ай бұрын
Hello,from where i can buy the roll bar with retractable light?i’m from europe
@mattarmstrong15627 ай бұрын
I put on a set of these & when the door is closed, the boards aren't as close to the body as I'd like. Is their a way to adjust this? I can push the boards with my leg & it goes farther in....
@x0Diesel0x2 ай бұрын
If you add some washers between the motor and the pinch weld on the corner you want to bring closer top the body you will bring it in a bit.
@coreygunter47877 ай бұрын
How can I get the installation manual for the chrome one?
@crashhypermonkey7 ай бұрын
Ankle breakers in under a year,, mine lasted about 8 months. Only put on 7000 miles. Dual motor opens very very slow now
@MrDamien19638 ай бұрын
Will it work on the new Toyota Tundra that has the digital rear view camera? It looks good but im worried that this function will be disabled or rendered unusable.
@JoseCruz-kp7ru8 ай бұрын
Worthless video, why would I buy this product ?
@Teasy0108 ай бұрын
Is it better to install the retractable tonneau cover before or after the Sport Bar 2.0? What I’m basically asking is… does the sport bar go over the tonneau cover or does the tonneau cover lay on top of the mounting plate of the sport bar?
@skiesthelimit68668 ай бұрын
extremely helpful video ...thank you
@BarnBrandBeards9 ай бұрын
Will this be the same application with a 2WD Colorado w/o Tow Hooks?
@onenation77849 ай бұрын
Want to hear how the motor sound
@mlgalbraith20009 ай бұрын
It weighs 11 pounds, the hitch isn’t square, the welds are terrible, way to overpriced for what you will have to return.