So cool! I recall sitting in that very spot….except I was in a boat!
@Panos__7 ай бұрын
America 😂
@durandtopping30237 ай бұрын
Thanks for this. 💪🏽💯
@RM-of3bo8 ай бұрын
So cool! What kind of bird is that taking an icy bath?
@Fireweed598 ай бұрын
I'm not exactly sure what kind of bird it is. I'm curious too.
@alirazmjou21498 ай бұрын
Thank you so much for this video متشکرم از شما آقای محترم
@sami-faisal8 ай бұрын
Thank you for the explanation. My steering belt was torn but the drive bilt still works and the car is moving but the steering is heavy. Is it possible to walk by car without problems to go to the car technician’s place?
@Fireweed598 ай бұрын
I apologize for not responding sooner, life's been a little hectic lately. 🙃 Yes, you should be fine to drive it to a mechanic. The steering is heavy due to the power steering pulley not turning fast enough to assist. I will say if your car is different than mine, it could have other systems that are driven by that belt as well. As a universal precaution, just keep an eye on the engine temperature gage, and make sure the battery light is Not on when the engine is running. If those things are okay, then you should be good. Drive safe.
@CallMeAdam202310 ай бұрын
Great video! Thank you, I cant believe how simple Toyota made the belt system on this car. I have an 01 and my alternator belt is about to bust. In a way its good the water pump is driven by the timing belt, so if both belts go you can still drive on the battery to safety.
@adedokundavid68018 ай бұрын
This isn't simple, you should see the belt placement in an Honda 2001. It's much much easier to get to
@joemammo11 ай бұрын
Sounds like dr phil is commentating
@user-zv9ye5cs1x11 ай бұрын
Подарите и вы сделаете больше чем вы думаете
@rudygarcia3115 Жыл бұрын
Someone tie a parachute to a car and see what happens
@RoalCoal_571 Жыл бұрын
The original meme
@paul77966 Жыл бұрын
The people inside are ok we promise 😂
@BojaneBugami Жыл бұрын
First car did a 180 and landed on wheels. So badass
@KuyaRhamTv Жыл бұрын
The drivers are all sentenced to the death row and were given a chance of a lifetime to drive and do these stunts hahhahaha
@user-yj2tu6ir1h Жыл бұрын
السيارات فاضيه اساسا
@stephenjlopez8881 Жыл бұрын
Only in Alaska 💀
@perryburton3729 Жыл бұрын
Shoot it while in the air
@shaserv Жыл бұрын
I’ll say this for white folks, they know how to have fun. Got nothing to do today? Let launch some cars over a cliff! Cool! 😂
@avalynnewilby8150 Жыл бұрын
Small things amuse small minds.
@liliangallardo4606 Жыл бұрын
It’s not funny dude🙄🙄🙄🙄
@timoberghauer7468 Жыл бұрын
It is funny
@jamespittman9953 Жыл бұрын
No Groundhogs were harmed in the recording of this event 😮😮😮
@fredminpin Жыл бұрын
I can sorta see why - just for fun. But is someone driving or do they get pushed or catapulted somehow?
@Fireweed59 Жыл бұрын
The vehicles launch themselves with their own engines. They put them in gear and pull on a (friction based) ratchet strap attached to the accelerator. The steering wheel is tied off, and a rail is sometimes used to help guide the car off the cliff.
@RM-of3bo Жыл бұрын
Big filmmakers could be getting awesome shots for free here
@getsmarty7603 Жыл бұрын
Lol no kidding eh
@Alola_Hanna-Barbera_TMS_Fan Жыл бұрын
That first one sounded like an overhead airplane passing by
@Alola_Hanna-Barbera_TMS_Fan Жыл бұрын
Imagine someone playing the Lego breaking sound when impact strikes
@Alola_Hanna-Barbera_TMS_Fan Жыл бұрын
Right in the Drink!
@charlesincharge.5161 Жыл бұрын
Only in Alaska would you ruin a perfectly good car. 📡👽🇺🇸 RUN!!!
@scottspaghetti7265 Жыл бұрын
I promise you that car was not “perfectly good” all the cars they jump might run but they are at/near the ends of their lives
@Louis52man Жыл бұрын
Are we they yet?
@fineartonfire_5327 Жыл бұрын
Sounds like the motor is revving. How do they “launch” them?
@Fireweed59 Жыл бұрын
The vehicles launch themselves with their own engines. They put them in gear and pull on a (friction based) ratchet strap attached to the accelerator. The steering wheel is tied off, and a rail is sometimes used to help guide the car off the cliff.
@michaelsherman8349 Жыл бұрын
I wouldn’t sit that close
@Fireweed59 Жыл бұрын
That's a valid point; a long pipe, that's used to guide the cars down a rail and over the cliff, flew off as the car flipped, and it landed about 30 feet from where I was sitting. 😳
@keithmesecher9468 Жыл бұрын
Hell yeah red necks have all the fun❤
@kyletubashit6929 Жыл бұрын
I could get behind this.
@RM-of3bo Жыл бұрын
What a blast!
@PetsVlogg Жыл бұрын
Beautiful
@hazeltate6614 Жыл бұрын
Spray AT-204 on it
@RM-of3bo Жыл бұрын
Great music too!
@RM-of3bo Жыл бұрын
Fun! Speedy dude! ❤
@theclinger Жыл бұрын
Thanks boss.
@RM-of3bo Жыл бұрын
So peaceful. So beautiful.
@RM-of3bo Жыл бұрын
Sure do enjoy this!
@S3venah Жыл бұрын
Sam tho- 😂
@RM-of3bo Жыл бұрын
Thanks for the good explanation.
@jamesmichael8549 Жыл бұрын
How do you take out out the bolts next to the Harmonic Balancer to take out the Belts ? I had a 2001 Toyota Camry 2.2 Liter . I tried taking them bolts out to loosen the bolts but it looks like I have to take more bolts more than two ? I loosen one bolts already .But how many bolts should take out to loosen the belts .?.
@Fireweed59 Жыл бұрын
"EDITED"...That little powersteering belt is tricky. It's possible to remove the belt by loosing just the 12mm tensioning bolt with an 8" extension from the wheel well, but a small hammer may be needed to move the slide. There is a pivot bolt that can be loosened from above, but you have to remove the passenger side "Dogbone" and side engine mounts first to get to it. (the bolt is at the tip of the triangular plate). (The alternator belt has to be removed as well, in order to slip the power steering belt over the harmonic balancer.)
@Fireweed59 Жыл бұрын
Here's a tip... when re-tightening the belt, I wedge a 18mm or 19mm wrench in the adjustment slide between the bolt and the edge while tightening the bolt with a ratchet. Make sure you get the belt tight enough or it will squeal. Believe me I know.🙄
@jamesmichael8549 Жыл бұрын
@@Fireweed59 So if I loosen the tensioning bolt through the wheel should that loosen the belt ? Because I loosen up 2 bolts in there so far the very top bolt is very tough to loosen .But if I do does that going loosen the belt ? Or you have to do it in the back where you did your approach it from the top of the engine ? Iam just changing the belt .nothing else I had a Toyota Camry 2001 2.2 Litter 4 Cyl . I already went down in the car where my friend told me to loosen the bolt in the back which I cannot reach even bellow down there So I think the top where you did yours is the only choice. You said in the back there was only 2 bolts can you tell me what bolts do I have to loosen ? Thank you for the reply I appreciate it
@Fireweed59 Жыл бұрын
@@jamesmichael8549 give me a little bit, I'll make and post a video really quick...
@Fireweed59 Жыл бұрын
Ok here is the solution 😁. I had to re-learn it myself. kzfaq.info/get/bejne/oZ6ngddk0tTeYmw.html