Got this exact problem, the propeller has come off. Will get new pump and give it a go.. wondered if I could superglue the prop back on

First of all l really dislike painting, had 18 panels 6x6 to do, really wasn't looking forward at all, decided to buy a Wagner electric sprayer, saves a lot of time and gives great results, l did 2 thick coats.

You should have used an undercoat would have helped alot done mine and it turned out fine

Thanks so much, I have the same model and need to replace this part. I am fairly confident at the actual change but just spent ages on my hands and knees trying to figure out how to remove the front panel.........I guessed there were some screws somewhere and now I know where!! Thanks

Easiest way is to really load the brush up and start at bottom and brush upwards to take the paint and any drips with you, I had it down to a about 30’seconds a slat , nice thick coat too

Great video. Well done

I almost never comment on videos, but you have just spared me a lot of nerves. Than you sir. Great video.

Legend 👌

Brilliant, saved a lot of time.

Looked better brown.

Great video. Actually your mistakes are more valuable to DIYers like me. Because you showed us how and why you made mistakes. So, I paid more attention when I was doing it. I learned from you. Your hindsight is my foresight. Thank you.

This made me chuckle, just wanted to see if you had made any more since the last time xxx

★彡[ тнυмвѕ υρ ]彡★

Hope you went easy on your Mrs?…it should have been more like £3.89p…hope you got a successful refund?…Brian

Many thanks for sharing this tutorial…I need to get to my Beko pump and will give your 2nd suggestion a go…have liked and subscribed…Brian

Off to buy a new switch!

Used this on our rough sawn garden gate and will not use again. Even after correctly applying 3 coats I find that this paint washes away after about 6 months. I then made rough sawn seat with same timber but used Cuprinol ducksback instead . After 2 years the seat looks brilliant and has had another coat this year. I would certainly not use Ronseal again as the Cuprinol may be a little more expensive but results are far better, ie does not wash out.

Wish I had seen this video before starting my fence, same issue! Have put 3 coats on to date, and can still see the colour coming through 😢

I took the drain pump apart. It was all very simple thanks to your tutorial, I chose the second method, I'll let you know once the new drain pump is mounted.

Не нужно снимать переднюю панель

Thank you very much for sharing! Great time saver!

Exactly the video I needed to see thanks. Going to use the 2nd option now.

Really helpful thank you.

Thank you! This also works for the Blomberg LRF285411 (which is rebranded Beko). I had a loose impeller and ordered replacement Part No: RS833037 from ransomspares. The quick and easier method at worked very well for me (at 00:33:50 ). It's now working perfectly. Thanks!

dont use this crap mate wasting your money they shouldn't make crap like this though ronseal is a good firm and does make a lot good gear this aint one of them as a decorator i use palatine log and cabin or their barn paint which is matt both oil based if on bare timber seal with aluminium primer this will also seal the knots yourll be good for 5 years plus if you have any wood that has gone grey treat with boiled linseed oil first or use wood reviver to bring back it back to live timber

Hi, thanks for this video! The trick in the end worked really well. I have a question though. I removed the pump because it does not do anything when I select the 'drain & centrifuge' mode. However, when I hook the pump up directly to mains voltage it does work. Could this mean that my Beko is simply not supplying any power to the pump? Any help would be appreciated! :)

Thank you for this! Helped my hubbie so much and saved our washing machine

Thanx for the video. Helped me out. You don't have to remove the stereo. The panel with the breaker comes off easily by prying on one side with a flathead screwdriver. Cheers

Nice basket. I had used aluminum screen for a basket. I think wire mesh would do nicely for parts that are heavier. Thank you for you video.

Thank you very much for your video! Great help! Unfortunately there's no blockage. The clothes are still full of detergent at the end of the cicle. I rinsed the load twice and it didn't change much. I am suspecting that it could be the control board because it also adds time in the middle of the washing. Any other suggestions? Thanks again 😁🙏

Maybe if you power washed and left your fence to dry before applying cause when I did a fence with it last year it was proper thick and definitely took one coat, two coats at most

Thanks for the video.. the quick method at 33mins is a life saver 👍🏻

Yeah I had to do 4 coats

Thanks for the video! is that definitely the right part, as the listing doesnt show it is for the WTB740E1W? Thanks!

When I start a job I consider myself a quick worker, but boy oh boy, this fella is fast!. Ronseal is useless, it is so thin and watery that within a few weeks it begins to wash off!. I'm surprised that they can still sell the rubbish!

Doing father-in-law garden, there is a lot of timber to cover, 6x6 panels,sleepers,picket fence so I decided to tape and spray. Anyway as it says on the tub ONE COAT yeh right. Five coats , 8 days later and I can still see the old colour coming through. I gave the first tub a stir WHY Why do they do a special offer on 12litres, is it ten but water down even more to make twelve. I wonder, I know a lot of items have got smaller and cost more, so are we buying more water in Ronseal?

I got this paint and I put it on new fences and no Word of a lie I’m on my 6th coat and second tub and that’s only one side of my garden it’s crazy as if you get any other colour it takes two coats and it’s perfect I’m going nuts over here

Changing the colour is always difficult. I find Ronseal is 💩 to be honest, but you eventually get there. I saw a professional on KZfaq recommended Cuprinol Duckback. He said the same thing about Ronseal 😆😆

Exactly same issue here. Thanks for the vid. I thought I was doing something wrong 😕

To be fair to the company who made the paint you are using, it probably would cover with one coat on a new fence .

Dampen your brush.

My hubby makes his own wood stain colour turns out dark oak,cheaper and goes further

Oh dear me, all that hard work for that result ,maybe would've been better to go for black probably wouldn't have taken that many coats,been wanting to do my fences but don't know what colour aswooden flower boxes dark oak

How did u connect it to the phone? Mine won’t connect for some reason?

Ronseal 17 coats from my experience

You needed as many coats cos you changed the colour and didn't remove the old paint . Iv just painted all my fences and changed colours prep work is key and mine covered with just one coat as said on the tin

Fab 4 metre brush ! 🙈😂😂 made me smile.

Thank you , I will not be buying Ronseal fence paint. I wanted to see how people felt about the paint as I always used Cuprinol and been very happy with it. Think after watching two u tubes videos that have said the same it’s a def no no for me. I do think sometimes they make special offer paint that is not as good quality as well. Tesco were selling a Johnson’s paint less money than usual that was also rubbish against their usual paint. Food for thought. Thank you.

Thanks for making this video. I am confused with Ronseal Fence Life Plus and Cuprinol Ducksback. Do you happen to know which one would be better for a completely new fence that's never been treated/painted?

Beloved RONSEAL Is A GOOD Brand