Low Key Off-road

Пікірлер

@jessebarraza6039 2 ай бұрын

I did this to my F250. Steerings way better when its not moving. The pump is loud now. Lets see how long its lasts. Did ur pump get loud?

@Low_Key_Offroad 2 ай бұрын

My pump did not get loud. Is it possible you have air in the system?

@Fordtruckfan89 Жыл бұрын

Ive pulled apart several later 4.0 c3 pumps and they dont have the node sticking out, its a smooth shuttle valve. I imagine they have a smaller hole than these too

@Low_Key_Offroad 2 ай бұрын

I have found that the node was on 97 and up as a rule. I think the node is there to limit flow in a stock application.

@Fordtruckfan89 Жыл бұрын

Question on a stock application my explorer has a new rack and pinion, reman pump, steering assist is lacking at idle, would just removing the restrictor nipple keep the pressure the pressure the same but help with the lack of flow? Not trying to blow out a new steering rack from excess pressure.

@Low_Key_Offroad Жыл бұрын

I'm not exactly sure. It couldn't hurt it. You may consider putting an underdrive pulley on it to make the pump spin faster at an idle

@Fordtruckfan89 Жыл бұрын

Any idea where I can get one?

@Low_Key_Offroad 2 ай бұрын

@@Fordtruckfan89 Driven auto is where I got mine.

@VileMisanthropy Жыл бұрын

How did ypu get the shuttle valve out, Mines stuck.

@Low_Key_Offroad Жыл бұрын

You should be able to pop it out fairly easy with a small punch. Not sure why yours is stuck.

@VileMisanthropy Жыл бұрын

@Low_Key_Offroad honestly, I think its the "reman" pumps I'm getting, there rust residue inside. I did get it out through the bottom with a punch, shouldn't these move freely?

@Low_Key_Offroad Жыл бұрын

@@VileMisanthropy yes it should move freely.

@nwoffroader Жыл бұрын

I want one!!! Cool video 👍🏻

@Low_Key_Offroad Жыл бұрын

Contact Joe or Tammy Karnagewelder.com. they will hook you up

@joeobremski5331 Жыл бұрын

Very awesome ! I hope you get a lot of use out of your new welder- ON OTHER RIGS !

@Low_Key_Offroad Жыл бұрын

Of course. Mine never needs repair. Lol

@CorkscrewTrail Жыл бұрын

That has to be the most real-world video that I’ve ever watched. Second guessing the welder I was planning.

@Low_Key_Offroad Жыл бұрын

Thank you, I'm not much of a grandstander so it was not easy for me to make this video. But I thought it turned out good.

@johnhinsz4056 Жыл бұрын

Very cool buddy. They make a great welder and some day I'll own one.

@Low_Key_Offroad Жыл бұрын

Ever since I saw one a few years back, I knew I needed one. Just didn't know how I was going to get it. LOL, these things weld far better than the ready welder and are way more ergonomically a better setup. No more lugging a couple of car batteries out of other people's rigs to hook things up to get ready to weld. I'm literally ready to weld in seconds.

@Low_Key_Offroad Жыл бұрын

Thank you sir

@Formerjughead Жыл бұрын

Good Stuff buddy!!!!

@Low_Key_Offroad Жыл бұрын

Thank you sir!

@TnADoStuff Жыл бұрын

Thank you for this! I'm going to have to figure out how to do similar on my Jeep WK pump; it's a bit different than these, but you gave me a starting point!

@Gloccthejocc Жыл бұрын

Would I be able to achieve the same with a reducer on a smaller hose. I’m lookin to put in a power steering cooler. But it’s a 5/16 fitting not the standard 3/8. What’s ur thoughts

@arontesfay2520 2 жыл бұрын

Can I do this without removing the pump and/or draining the PS fluid?

@justaboutsound 2 жыл бұрын

Hi can you help me getting my power steering pump modified. I want it to be 25% more lighter.

@johnbaum1000 3 жыл бұрын

Finally! I hate how stiff my steering is

@Low_Key_Offroad 3 жыл бұрын

You won't regret it

@randumadventures 3 жыл бұрын

So a year later is there any down side to this mod or still working good?

@Low_Key_Offroad 3 жыл бұрын

It all works great. Runs by Ram assist well.

@rcazarez13 4 жыл бұрын

I have a 5.0 from a explorer and a crown vic front clip. The steering is kind of hard you think this may solve my problem?

@Low_Key_Offroad 4 жыл бұрын

Yes it will.

@rcazarez13 4 жыл бұрын

@@Low_Key_Offroad Thank you

@willhearns4015 5 жыл бұрын

What are the dimensions for your plate? I'm doing the same thing on mine.

@flatbrokemodsquad4241 7 жыл бұрын

that was a speed bump

@Gunker02 10 жыл бұрын

what was he shooting with?

@Low_Key_Offroad 9 жыл бұрын

300 win mag.

@Fordbronco68 10 жыл бұрын

I lost half of my gopro footage from this Unevent. I'm guessing Ben sent you this Lowkey

@brpa1152 11 жыл бұрын

How is it an exact copy if its so much better?? And i think you may mean CJ....idiot!

@Low_Key_Offroad 11 жыл бұрын

Its hard to see in the video but what happen is I got on the throttle a little to soon. My wheel speed was way to high before I landed. The sudden stop when I landed broke the axle. I just got all the parts this weekend to put a 14 bolt under it. That should put a stop to the broken axles