Thanks, replaced 15" 2014 alone in 30 mins. Used tooth floss from a pharmacy combined in 2-3 layers
@theemrroboto5 ай бұрын
Anyone that has home automation relays needs to see this video. You just saved me $100's not having to purchase new momentary press switches.
@andyrawlins5 ай бұрын
Genius thanks :) I ended up using 'garden wire' but the principle was the same
@AlexVarju5 ай бұрын
Thank you so much. This was much easier than disassembling the entire laptop to use the solvent method!
@R0ll_lex6 ай бұрын
Fishing line would be good also. Nice idea
@swedesam7 ай бұрын
This is probably the safest & quickest method out there. Just use the new battery's included screwdrivers as handles with the string ends wrapped-tied around them and you're good to go. Thanks man!
@AttilaS777 ай бұрын
You're a lifesaver thank you!!
@darrenlegallais19748 ай бұрын
Thank you for risking your laptop to make life easier for the rest of us LOL 😂 😂.. Just kidding... Very helpful video indeed especially when iFixit has 100's of steps to do just that ;-)
@patrickpowell54309 ай бұрын
Er, it would help if we saw the Macbook Pro with the new battery installed up and running and everything working as it should. I assume it was, but . . .
@user-kp4ud4jx7f9 ай бұрын
If I remove the battery does the Mac work with the power supply?
@HappyChillmore10 ай бұрын
yo!! This was genius. I had a similar but slightly thinner cord which I put a small amount of goo gone on and it came off so easily. THANK YOU. My battery pack swelled up and the computer wouldn’t work, I had a ton of unfinished music on there I was devastated to lose. I took the battery out so easily doing this and will just finish the tracks with no battery (plugged in) since I have a newer computer
@gabrielmarcelli534510 ай бұрын
Wow. Great job.
@RudolfFernandes10 ай бұрын
Great video. Not sure why guys are bothering removing the remaining adhesive -- what's the harm in leaving it there. Also, once I could grasp the far end of each cell with my fingers, I discarded the thread, just using gentle upward pressure to SLOWLY prise it off.
@lgg4doru43011 ай бұрын
How to install?
@joecburke Жыл бұрын
You can use a pure-wire guitar string, with each of the ends wrapped around a dowel of wood, to cut through the stickers under the battery blocks. more easily A strong nylon fishing line will work as well. Anything thick like this nylon cord is going to have a tougher time cutting through the adhesive pads, as deomnstrated.
@matthewschwartz6133 Жыл бұрын
Man, wish I found this video before I spent 20 minutes using a knife to cut through the adhesivee.
@jonhuck3067 Жыл бұрын
This is an excellent tip. Thank you!
@petervier Жыл бұрын
this worked really well!
@louisviciedo Жыл бұрын
you basically skipped the entire install process
@amightysailingman Жыл бұрын
You made things so much harder for yourself by choosing that nylon cord. I just tried the dental floss technique. Yes, it's not a strong as your cord, but it doesn't have to be. I just tied the ends around two old toothbrushes (great cleaning tools anyway; I always keep them around after I replace toothbrushes) slid the floss under the battery and sawed back and forth using just the force of two fingers on each hand. No need for a helper or any huffing and puffing, and no pain in the hands. After all, when you're trying to cut food, you don't just grab a knife and push down on it. It's a lot easier to cut back and forth with the knife.
@LucaCiminelli Жыл бұрын
Just a silly question from a guy who's about to try this because the cell in his Mid--2014 are so swollen up the back cover can't really hold them anymore: why would I want to glue the new battery? I'm not even sure why the original one was glued in the first place! Is it just me?
@UbhiTS Жыл бұрын
it's justy to ensure that once the battery is in there, it does not move even a millimeter and cause stress on the connection or the motherboard. I'll be honest, I've personally glued my batteries back since you need to do this only once in the lifetime of the macbook, or maybe twice in 4 to 7 years
@LucaCiminelli Жыл бұрын
@@UbhiTS Thanks for getting back to me on this but are you truly saying that they designed the battery and the only way for it not to move was to glue it and a set of four screws plus the fact that's locked on the bottom side because of its shape and everything is actually then kept in place by the back cover wasn't enough? My Mac is mid2014 and it still rocks! Changing the battery could be incredibly easy and yet it's been made risky and difficult. I don't know if I'll have to replace the battery again (it could be, e.g. this battery I just bought could be not so performant as I'm expecting it to be) and I don't want to go this way one more time, not even the slightest chance.
@rickkremer0525 Жыл бұрын
Kudo's to mom for her help!!! Seriously though, thank you for posting this, its much better than squirting alcohol in the compartment to loosen the glue.
@bhabi70712 жыл бұрын
Thanks. Creative!!
@Bosivian2 жыл бұрын
Can you do this same modification with a Leviton 5622-2W ?
@UbhiTS4 ай бұрын
i’m not sure, sorry
@nj080282 жыл бұрын
How do I use this with a Google Nest or home mini?
@KurtCobain20212 жыл бұрын
Does it power on when the battery is disconnected?
@UbhiTS2 жыл бұрын
i have a mbp pro 2015 running on adapter without a battery :)
@KurtCobain20212 жыл бұрын
@@UbhiTS maybe it’s early 2015?
@UbhiTS2 жыл бұрын
@@KurtCobain2021 I think it's mid 2015
@dotslashsatan2 жыл бұрын
Haha use a magnifier see if u can speed it up
@dotslashsatan2 жыл бұрын
Such a simple trick!! Thanks for the tip!
@coolhand19662 жыл бұрын
That's a novel use of a UNIQLO Super Mario T-Shirt 😂
@phire46942 жыл бұрын
Soak the rope in alcohol first 99%
@user-rp4fi3fu1p2 жыл бұрын
What damper did you use?
@UbhiTS4 ай бұрын
i used a drone flight controller vibration damper
@UbhiTS4 ай бұрын
i used a drone flight controller damper
@emmettturner94522 жыл бұрын
I don’t understand. A dishwasher is something you leave on. Every dishwasher I’d seen for 40 years is the kind where you select a cycle with options, press start, and walk away. When it finishes there is nothing to turn off. The switch modification makes perfect sense for an in-sink garbage disposal, but not a dishwasher.
@UbhiTS2 жыл бұрын
thank you, I just fixed my error. It's for the garbage disposal and not the dishwasher, you are absolutely right.
@emmettturner94522 жыл бұрын
@@UbhiTS that makes a lot more sense. Thanks! :)
@PepperWarren2 жыл бұрын
Brilliant!
@mskikitv16812 жыл бұрын
Awesome! How do you change the bulbs?
@TheAceEditor Жыл бұрын
go in reverse
@vampalan2 жыл бұрын
Thanks a lot for sharing this and putting it on video. I was going to follow the iFix guide, but didn’t want to as it basically was a full tear down to un glue the batteries. I had been putting it off repair for about a year before I swapped out batteries.
@fredman19562 жыл бұрын
Great work, I will definitely use some of your ideas.👍🏽
@christiansanden80052 жыл бұрын
Kind of crazy how Apple put batteries in those laptops, incredible.
@MrCWoodhouse2 жыл бұрын
Awesome, dude. I thought a thin strong thread would be best, but it turned out some braided nylon twine was perfect. I got the old battery out inside of ten minutes, i swear. Clamped the chassis on the edge of my workbench. Use gentle pressure and saw back and forth, don't rush. So much safer than prying up with a spudger. Thank you for the idea!
@boseashish2 жыл бұрын
Absolutely a great presentation and thank you for every small detail that could save a lot of time and frustration
@IAmTheWaterbug2 жыл бұрын
I performed this procedure yesterday. Thank you so much! Removing the leftover adhesive took more time than actually removing the batteries.
@aungkyawaye31902 жыл бұрын
Very creative and good idea.
@CountVernon2 жыл бұрын
I viewed many of these battery removal videos and removed many batteries, this is by far the best. Why would anyone give it a thumbs down? By the way I have had problems with the cheaper batteries, they don't last a year. Maybe I should have paid for the Apple battery?
@thebaldfox2 жыл бұрын
clickbait title...
@irestinhim23122 жыл бұрын
A word of advice: Do your best NOT to touch any of the printed circuitry on the Logic Board. The static electricity stored in your body can blow minuscule holes in the circuitry which you will not see. Your computer will probably work fine but you may have diminished its total life-span considerably without realising. That is why certified technicians must use anti-static procedures and why all printed circuit boards are transported in anti-static bags. It's very sensitive equipment. At the very least you should make sure the battery is completely flat before disconnecting it (to avoid possible fire by piercing a battery cell) and once disconnected, press the power button for approximately 10 seconds to discharge any power left in the system. Cheers.
@agevoian2 жыл бұрын
great video, thx. any idea where I can get a good quality replacement battery for MacBook 15" 2015?
@meralynandcharleswalker31712 жыл бұрын
Dental Floss works well.
@franksonaplane2 жыл бұрын
Shaved 2 hours off my replacement time. Thank You!!!