What Does Compression Sound Like?
17:46
My Live YC88 Rig has changed!
13:43
THE YAMAHA YC88 ONE YEAR LATER
16:39
Пікірлер
@ashfaqtulu9027
@ashfaqtulu9027 3 күн бұрын
Thank you for introducing
@FRANKRICECOLD209
@FRANKRICECOLD209 3 күн бұрын
So It Would Not Work With Auto Tune Pitch Correction Plugin ? Thanks And One More Question What If You Audio Interface Does NOT Have a Direct Monitoring Button And The Direct Monitoring Button Is Grayed Out ? I Have Been Trying To Figuer This Out Foreve
@Featherlightstudio
@Featherlightstudio 3 күн бұрын
Most smaller interfaces have either a Direct monitor button OR and Mix knob that does the same thing but gives you more mix control. Or they have a software control panel that allows more flexible routing options but produces the same result.
@rockyguarriello2449
@rockyguarriello2449 3 күн бұрын
Hello Steve, Trying out my new YC-88/61 setup. Love the keyboard and thanks to you I am learning how to navigate an already great live keyboard. When my house gig resumes in 2 weeks I am ready to take the new duo out to the gig. Presently I am using a Nord Stage 4 88 and a Nord Stage 3 73 Compact for my upper keyboard. I was a big Yamaha user for many years from all the motifs to the stage pianos. I got spoiled by the Nords over the last 8 years but it was your PodCast that told me to gig the YC a try. I did find out one real important thing. Going out of the XLR's verses the ¼" outputs is huge. I could not believe the difference. Fortunately my Ashley 308B line mixer has channels one and two switchable between ¼" or XLR. Then I run that signal through a Focusrite ISA 2 preamp and into a DBX intelligent EQ, and finally to a Warm Audio Bus Summing unit. I then run out of the bus Summing via XLR into a Presonus Temblor Sub and up to my Space Station. It's quite a setup and is actually a small set up that's very portable. I can see by your videos you are a very talented player with nice chops. I would love to catch up to you at a gig. Let me know where your band is playing. I'm in North Carolina but would make a trip out to meet in person. Thank you so much for being a great teacher and keep up the good work. Rocky
@Featherlightstudio
@Featherlightstudio 3 күн бұрын
Sounds like a killer live setup!
@TebogoMotlhale
@TebogoMotlhale 6 күн бұрын
Cubase Chord Pads ended up dismally disppointing me becuz for YEARSSS the software FORCES us to use chord VOICINGS of its own. It was so frustrating to have a software dictate to me which voicings I am FORCED to use to play the Eb Major chord. I could Not even REDUCE the notes in the chord or do ANYTHING i really wanted with Cubase' forced-voicings 🙄😒🤕🤕 after 3 years i finally had to give up using chord pads and go to Scaler (yeah . . . THIRD-party plugin JUST to be able to play my preferred VOICING of the Eb Major chord 🤕🙄🙄). Scaler also showed me some flames due to . . . you're Not gonna believe this: It cannot transpose MULTIPLE chords stored on its Chord Pads. You must transpose the chords ONE by ONE . . . the most MUNDANE and easy operation (transposing notes/chords) . . . is STILL Not possible in Scaler in June 2024 😁😂😂.
@duncanhazlewood8045
@duncanhazlewood8045 6 күн бұрын
Thank you for this indepth review. Super helpful! Maybe I missed it, but I'm struggling to save my volume controller setting globally. Is it only possible to save at the patch level? I'd like to set my voume/expression pedal (via the Controller 2 port) to always control All Volumes - that way I can swell organ, or boost volume for solos on any sound on any patch. However, I'm struggling to find out how to save it that way. I can select that option on one patch and save the patch that way, but I can't figure out how to save this setting as a global setting. Do you know if that's possible, and if so how to do it? Thank oyu so much for reading this lengthy comment ... :). Again, GREAT job on a super helpful video!
@walleyvideo8297
@walleyvideo8297 8 күн бұрын
GREAT video!!!
@JohnJones-tx6rt
@JohnJones-tx6rt 8 күн бұрын
I think the lesson here is that unless you are a professional or want to take the risk of keeping up with the obligatory hectic pace of these vids, not to go anywhere near templates as they seem user unfriendly - using them can lead to disaster with many ways to go wrong in a maze of minutiae. As the same organising structures are used throughout the Cubase program, I suggest users like me (I don't use audio tracks btw) default to minimal, or no involvement with the project options that Cubase offers.
@Featherlightstudio
@Featherlightstudio 7 күн бұрын
Once you save one template, its the same every time, and they can be a huge time saver starting a project.
@Slinky1973
@Slinky1973 9 күн бұрын
great tutorial!!
@Slinky1973
@Slinky1973 9 күн бұрын
how did you end the tempo detection session? ie. which button did you press? :)
@Featherlightstudio
@Featherlightstudio 8 күн бұрын
Right click on your mouse to select any other tool (Cursor, Draw, Line, ext) and that ends the Tempo Detection session.
@Slinky1973
@Slinky1973 9 күн бұрын
do you have keyboard command shortcut like "b" for example that bounces the audio or renders in place? (rare bounce and render in place the same thing?) and ifso which one and what do you assign it to and where in the key commands assign window? thanks in advance, joey :)
@Featherlightstudio
@Featherlightstudio 8 күн бұрын
I assigned 'B' to audio bounce just because of my old editing habits from WAY back in the day but you can pick anything. How you set up your key commands has more to do with the way you choose to work.
@Slinky1973
@Slinky1973 8 күн бұрын
Heya :) thanks for the reply. Maybe I wasn’t clear. I also want to change my command to B for bounce in my key commands. Just wondering what I look for in there and in which section? Is it in the edits section of key commands and am I looking for the actual bounce word or render in place that does the bounce process? Many thanks. J :)
@Featherlightstudio
@Featherlightstudio 7 күн бұрын
@@Slinky1973 Go to the top Menu Bar/Edit/Key Commands Then search "Bounce" You'll probably get at least 2 results ( MIDI and Bounce Selection )
@xHRaulx
@xHRaulx 10 күн бұрын
I had my phone connected to play music to channel 5/6 via mini jack cable ( throgh phone's headphone jack ). Cannot hear or control volume while using headphones but it works when I connect speakers though the output, is that normal? Used without USB cable plugged in. By the way, thank you for the in depth review of the mixer, answered so many questions. 😊
@Featherlightstudio
@Featherlightstudio 8 күн бұрын
This would depend on the position of the Phones Switch (directly above the Phones jack) In Master you will hear the Mix coming into the board. In AUX you will only hear the position of the knobs on the AUX buss.
@earledaniels4539
@earledaniels4539 11 күн бұрын
Excellent video. Would have been good to have a Master Plan v Ozone comparison at the end.
@thefive1hero756
@thefive1hero756 12 күн бұрын
I just want to say Thank you! I just found this. Great work.
@matthewdennett1965
@matthewdennett1965 12 күн бұрын
Thank you
@michaelpittoggi1903
@michaelpittoggi1903 12 күн бұрын
Thank you so much! So clear straight to the point, I understand much more than ever. For a real word hands on approach this is great! better than anything else I have seen anywhere, much appreciation for your effort, great stuff. Thanks again Michael Melbourne Australia
@wilkinsi
@wilkinsi 12 күн бұрын
I am just days from upgrading from a mac mini 2018 with i3 intel cpu to a mac studio m2 max. I am hoping it will beat the mac mini m2 pro in every regard. I am not looking to do video straight away, but I don't want to get caught out when I get to that stage.
@NormanPeterson
@NormanPeterson 15 күн бұрын
You are a lifesaver!! GREAT videos!!
@kevinwilliams4855
@kevinwilliams4855 15 күн бұрын
Love this! 😎👍 I've been using the Sub Master idea for a few years now. This idea has enhanced and increased my workflow. Brilliant!
@projekct_amk
@projekct_amk 16 күн бұрын
You absolutely deserve a greater sub count, I find your videos to be my go to cubase tutorials. Thank You for your work
@mengeleto11
@mengeleto11 16 күн бұрын
Is it possible to export multiply tracks with different length, without adjusting markers for each one?
@Featherlightstudio
@Featherlightstudio 10 күн бұрын
This is done using the cycle markers function. You can create as many as you want and they can all have different lengths
@BryOdhiambo
@BryOdhiambo 17 күн бұрын
I love Cubase and it's currently my DAW of choice. However, when it comes to tempo detection and tempo matching, other DAWs like FL Studio make it much simpler and faster to undertake. 2 to 3 clicks and you are done. Save for this in my view, Cubase is the best.
@billymack4258
@billymack4258 18 күн бұрын
Great info and what a difference! night and day in my opinion. For those of us that don't have a tape machine, is there an online mastering service that we can send our mix or stems to that can perform this? Thanks
@Featherlightstudio
@Featherlightstudio 18 күн бұрын
A great resource for all things analog tape wise is Chris Mara over at Mara Machines. maramachines.com/services/
@billymack4258
@billymack4258 17 күн бұрын
@@Featherlightstudio Thanks
@francissymons4286
@francissymons4286 18 күн бұрын
Top Class!
@MohammedAli-fr5wy
@MohammedAli-fr5wy 19 күн бұрын
very helpful man thanks
@CaesarConsuloProVita
@CaesarConsuloProVita 20 күн бұрын
Which one is better for DJs who use an external mixer with their controller?
@Featherlightstudio
@Featherlightstudio 18 күн бұрын
Both have great preamps so its really a question of how many physical inputs you need?
@peteryoas
@peteryoas 21 күн бұрын
Hey, I enjoy your videos and live learned a lot! I'm curious on your recommendations on bass strings that would be best for the deep low old school country sound? Thank you
@Featherlightstudio
@Featherlightstudio 21 күн бұрын
A lot of that old country bass vibe comes from using flats for sure. If that's a little to dark for you, than pure nickel round wound strings like GHS Boomers or Rotosounds give you great tone without that rock/Metal growl or zing.
@mrcrowleyoz
@mrcrowleyoz 22 күн бұрын
Could you play both music from a phone and an electric guitar and listen to them on headphones? Is the channel for a guitar pre-amp? I’m mainly looking for something to practice at night on headphones.
@Featherlightstudio
@Featherlightstudio 21 күн бұрын
Absolutely, as the ProFX6 has High Z switches on both Mic input channels. But you still might want a pedal or something since it would be all clean tone and still pretty low volume.
@mrcrowleyoz
@mrcrowleyoz 21 күн бұрын
@@Featherlightstudio Without a pedal is fine but couldn’t I adjust the volume on the channel, guitar, and master volume?
@Featherlightstudio
@Featherlightstudio 21 күн бұрын
@@mrcrowleyoz Of course, a pedal just may give you more tone options
@avi3dfx1210
@avi3dfx1210 22 күн бұрын
Nuwce comparison, but the real thing to compare is the sound engine... It has been changed.... I did a null test using basic serum saw wave. And there are differences
@melvinperalta6883
@melvinperalta6883 22 күн бұрын
Thanks for this! I have a CK61 (and am thinking about upgrading to YC88). My CK61 can connect to the iPad in a similar way AND the A/D input also gets routed into the iPad (so that I can use iPad apps for effects for external gear). I saw in a different vid that as of three years ago, the YC88 is not capable of doing this. Have there been any updates for the YC series that enables A/D input audio to be routed through USB? Or is this one of the set advantages of the CK series compared to the YC?
@Featherlightstudio
@Featherlightstudio 22 күн бұрын
The A/D input is really a Mix convenience for external audio to be summed with the YC at the Main outs (Keyboards/Mixers, ect). It Would be super cool if they change that in a firmware update to route to internal FX.
@GuitarJesse7
@GuitarJesse7 22 күн бұрын
Great guitar tone, works so well in this song.
@kevinnay7379
@kevinnay7379 23 күн бұрын
That is exactly what it's like.
@abnzg
@abnzg 23 күн бұрын
this is one of the best comparison videos of audio components I've ever seen. Thanks @featherlitestudio!
@bjdarl24
@bjdarl24 23 күн бұрын
Great tutorial on Frequency 2. Thanks again Steve
@Adam_Mokanszki
@Adam_Mokanszki 23 күн бұрын
OK I am using this keyboard for a while. but tip #1 already blew my mind. Thank you!
@JudgeFredd
@JudgeFredd 25 күн бұрын
Great video !
@flumetron
@flumetron 25 күн бұрын
This is my go to EQ so this has been very useful: thanks Steve. Pity about the third example being rap crap but 🤷‍♂️
@AMBIOSIS
@AMBIOSIS 26 күн бұрын
Would of been nice to leave the plugin in white color mode so we could see it better . Just saying .
@AnthonyHerbst-xp6uu
@AnthonyHerbst-xp6uu 27 күн бұрын
Great channel
@brilliantatyahoo
@brilliantatyahoo 27 күн бұрын
Longtime user of Frequency as a de-esser. One other feature that most de-essers don't have is a release time. I always set my release time for de-essing to somewhere between 1ms and 15ms, depending on the tempo and phrasing. Anything slower makes the vocal sound like its oscillating between syllables.
@Featherlightstudio
@Featherlightstudio 27 күн бұрын
Great suggestion!
@edwardstaszko
@edwardstaszko 27 күн бұрын
Great video! I’ve always understood the uses for dynamic REDUCTION, but this is a good explanation of uses for dynamic increase. I would love to see you tackle the Quadrafuzz plugin.
@Featherlightstudio
@Featherlightstudio 27 күн бұрын
That's another one of my favorite cubase plugins.I go into some of its uses in this video around the 9 minute mark kzfaq.info/get/bejne/rJl_eqWCypaocmw.html
@osiastedian
@osiastedian 28 күн бұрын
Is the Master EQ saved unto a live set?
@Featherlightstudio
@Featherlightstudio 27 күн бұрын
No, its completely independent of the presets. Think of it like a hardware EQ in your rack. It's meant to be a realtime control for adapting to changing live setups and sound systems.
@cerebralkaos2385
@cerebralkaos2385 28 күн бұрын
Great video, very helpful especially the section on tempo detection.
@cherisecarvermusic6658
@cherisecarvermusic6658 28 күн бұрын
Another excellent video from Steve and very clear explanations, as usual, of some of the features of that amazing EQ. We have several fancy EQ plugins in our studio, but our frequent go-to is still the stock Frequency2 in Cubase because of the versatile features you explained so clearly. We love using the M/S and sidechain functions on it as well. And I liked the sound of the first country song there!
@Featherlightstudio
@Featherlightstudio 28 күн бұрын
Thanks, yeah Dalen Hargett is a real talent. Can't wait to work on more of his upcoming stuff.
@DeltaWhiskeyBravo13579
@DeltaWhiskeyBravo13579 28 күн бұрын
Great use of the Swiss army knife. Excellent demo. Since I'm using Studio One 6.6 and not Cubase, I'm doing a similar action with my SSL X-DynEQ. However I'm also doing mid side EQ on top of it, so EQ, compressor, expander, with designated areas of stereo, L/R, M/S setting per band of which there's 24 bands.
@Featherlightstudio
@Featherlightstudio 28 күн бұрын
Studio one has got some killer FX as well for sure!
@Byron101_
@Byron101_ 28 күн бұрын
great explanation!! very good video!
@Markrspooner
@Markrspooner 28 күн бұрын
Great video but I did have to search RTA 😂 It might only be me that didn’t know what it is. It means Real Time Analyzer
@Featherlightstudio
@Featherlightstudio 28 күн бұрын
I feel ya, I have to look stuff up all the time with the music tech world changing on a daily basis it seems.
@jimfromzerosurge4846
@jimfromzerosurge4846 28 күн бұрын
Thank you for sharing your thoughts of why you choose different settings. I have used that same Yamaha pedal for almost 30 years now! But I usually only use it for expression or to adjust the live sound of part A/B or just the organ. I am exciting to get home tonight and try it as a Wah pedal.
@4kfilmsoundstudios480
@4kfilmsoundstudios480 29 күн бұрын
Vinyl Jacket Records & 4k Film Sound Studios.... - Not all Monterey OS works with firewire and adapters. Double checking another Mac Book Pro Reloading Mojave but they Monterey and Mojave Audio and Video MacBooks will never get online ever and never use Apple ID... It gets hacked all the time.
@billirwin1726
@billirwin1726 29 күн бұрын
Im guessing you're on pro 13?
@Featherlightstudio
@Featherlightstudio 28 күн бұрын
Yes
@TheRevWm
@TheRevWm Ай бұрын
The answer is YES! The Apple Corporate lunatics have removed the lines of code for the macOS audio core necessary for Firewire audio gear to continue to work. CEO Tim Cook came to Apple with the intent to destroy Macintosh, and by removing optical disk data support the CEO has effectively killed all educational and business uses of Macintosh Computers. CEO wants to have an "iCloud" environment where users rely completely on the data storage of iCloud with its monthly data storage costs. Monterey is the last macOS to make Firewire audio gear work. Apple is condemning all firewire devices to the landfill. Apple is a heartless and cruel company that hates its consumers. Consider Apple vandalizes the macOS system software of computers that are six years old and throttles six-year-old computers to about half-speed essentially ruining Macintosh computers for most users. Although Mac computers are excellent hardware, DO NOT BUY MACINTOSH COMPUTERS OR YOU WILL BE SORRY! Macintosh Computer sales are plummeting year over year as a result of Apple's CEO's madness to destroy what could have been a very viable and profitable computer company. I have used Macintosh Computers from the VERY FIRST 1984 AD 128K original Macintosh. In conclusion, having evil people rule the nation and corporations have disastrous consequences.