I originally got grip heaters intended for use on snowmobiles and installed them on my motorcycle many years ago. They worked great and were plenty warm. I think they were the Kimpex brand (same as Tusk brand) I usually ran them on low because your hands will be way too hot on high. Made riding in freezing temps so much nicer! I still install them on my bikes now too. They are alot cheaper than heated grips (I like to keep my stock grips) and work great!
@davidmiller539526 күн бұрын
Worst video I've ever seen.
@CorneliusVanberkel28 күн бұрын
Where do you get your used bikes in Nova Scotia I have recently started rebuilding a kz440 from fB market, wondering if you could help me with finding a motorcycle junk yard.
@davidgambler1591Ай бұрын
Rhinowalk sells the 3 bag 65 Liter set for $59 US. Why did you say nearly $200 Canadian ?
@Booki893 ай бұрын
Good video mate ! Learnt about continuity testing the frame ! How are the grips holding up? Have heard need more insulation off the bars to prevent heat loss
@SgtPimpa3 ай бұрын
i did the same and it works.. only i hear the altenator whining over the speakers. Not when listening to the radio only with using the ''cassette player''
@carmmusitano6273 ай бұрын
Wow! what an absolute waste of time it was watching your video. You don't show where the connections are or how to identify them.
@SteveB-hy2ci3 ай бұрын
Put it back to original
@juliannachenze35674 ай бұрын
I tried replacing the gas tank key assembly on mine but the new one leaks? What did I do wrong?
@loghancolegrove42674 ай бұрын
what tires should i put on mine its a 1980 440 tld
@dennisburkhardt40624 ай бұрын
Thank you very much for the video it really helps.
@cliffmatthews65775 ай бұрын
Absolutely garbage
@trailtrashgarage4 ай бұрын
Sry you feel that way.
@edgardomatos69235 ай бұрын
great video , so the 1500 honda goldwing, 1992 . no aux button . I purchased the cassette with wire, installed the tape , connect the wire to my phone, but can't hear anything . any advise
@trailtrashgarage4 ай бұрын
I assume it works with a regular cassette? Maybe a faulty adapter?
@HieuNguyen-yg1sg6 ай бұрын
Exactly what i was looking for, thanks man
@edgardomatos69236 ай бұрын
great video. 👍 . how's Bob's wing .
@demetriosa76466 ай бұрын
Can these work on a snowblowers Stader?
@trailtrashgarage4 ай бұрын
Hmm if its a 12v DC system theoretically yes but I'm not sure how much juice your Snowblower stator would put out. Many small engines run a AC based system.
@demetriosa76464 ай бұрын
I’ve already installed them. I added LEDS with a bridge rectifier and bypassed the halogen to free up more juice. They work perfectly!
@trailtrashgarage4 ай бұрын
@@demetriosa7646 awesome!
@djmaroney6 ай бұрын
Sorry just saw the thing verse.
@djmaroney6 ай бұрын
Would you be willing to to share the STL file?
@RamxRamx-fw3gm6 ай бұрын
Wow!! So maybe just a jump starts gets other parts moving that don’t do with a regular kick start. Makes sense. I hope I get mine started. Awesome that you never gave up! So what stater do I buy for my 2001 drz 400 kick start? ;) any suggestions?
@trailtrashgarage4 ай бұрын
No it just gets the motor turning faster and longer than a kick start. If your DRZ has a starter motor replace with a OEM or take it to a shop what specializes in starter/alternator motors for a rebuild. If your DRZ never had a starter motor I don't imagine you could make one work without serious modification.
@RamxRamx-fw3gm6 ай бұрын
Put gas
@RamxRamx-fw3gm6 ай бұрын
How about a hotter plug?
@RamxRamx-fw3gm6 ай бұрын
But the bike worked before! Don’t sound like all these shops that just seemed to make money off the people they smile and say hi at only in their shops. It never had an issue bro. So frustrating and it’s awesome you are being so transparent. Great channel
@RamxRamx-fw3gm6 ай бұрын
This is ridiculous! Should be able to take out the old stater and put in the new! Unless time is money and all mechanics get paid more the more complicated things get that take more time. What would a real shop do?? Fix it right??
@RamxRamx-fw3gm6 ай бұрын
What does the cdi have anything to do with?
@antonwearsakilt52097 ай бұрын
Personally I would have liked a bit more detail on the electrical side, less of the 3d printed plastic. Yes the plastic looks good, however it's a classic bike, using wood, steel, aluminum or any other material could suffice to fill in the holes. That said it's one of the better yt tutorials. Good job.
@trailtrashgarage4 ай бұрын
Fair enough!
@tellbrandonwhy7 ай бұрын
Does the 2-into-1 exhaust change the way it runs? Did you have to do any jetting afterward? I really want to put high mount on my 440LTD,, but a little intimidated by the project.
@therealajahn7 ай бұрын
Turning in a timelapse us bad luck i think.
@johngaulding37109 ай бұрын
Had mine in 1985. Drove it to work every day in Houston traffic for 3 years before I was rear-ended at a stop light and it totaled the bike.
@albylikeshalloween3 ай бұрын
Damn dude that sucks!!!!
@danielbut43389 ай бұрын
I gotta 440 i got when i was about 15 im 18 now and im gonna actually get it running after 3 years
@mhb-hz9ud9 ай бұрын
Shouldn't the floats prevent your carbs from overflowing? New to bikes and the 440 is my first one and I'm having a bear of a time - really appreciate your info.
@mhb-hz9ud9 ай бұрын
cant find replacement parts for the oem petcock so i'm switching to full manual anyways :)
@gohanarturo9 ай бұрын
hey bro, where did you get the carbs parts?
@lroyster9010 ай бұрын
I need everything you made in this video for mine
@lroyster9010 ай бұрын
Can you make me one for my GW
@lroyster9010 ай бұрын
I'm working on my 88 GW
@gustavbohner712311 ай бұрын
No Englisch
@RE-nc8fc11 ай бұрын
I have a local 3D printer service, so I just need one of each part? Does this print only to this brand of radio?
@mitchjimmy296211 ай бұрын
I was hoping you would just chunk a car radio in it and how to wire it up
@Bobodeman Жыл бұрын
So far loving your videos, they are my type of videos, may I ask what program you edit with?
@Bobodeman Жыл бұрын
the similar ones ive seen are meant to go on the grip itself, how are these so far?
@eLu2198 Жыл бұрын
Thanks for taking the time to upload this.
@shankarbn Жыл бұрын
Can you not print the ram balls in TPU?
@georgecorwin8776 Жыл бұрын
Are those cable grommets on the forks you made for sale. Mine have crumbled also and needi was gonna stop by a fix for those.
@trailtrashgarage Жыл бұрын
I’ll put them up on my Thingiverse page and link them here. Know anyone in your area with a 3D printer? Direct them to my link and they can print you as many as you like
@TTADV Жыл бұрын
When we saw that Savage for the first time I never thought it would be looking that good that quick!!!
@trailtrashgarage Жыл бұрын
Thanks man!
@ryandickinson2091 Жыл бұрын
Nice Job!! Need the DR650 footage now!!
@trailtrashgarage Жыл бұрын
It’s coming it’s coming geesh. ;)
@kentclark3719 Жыл бұрын
Would you be interested in selling one of these?
@trailtrashgarage Жыл бұрын
I could but you can download the plans from my Thingiverse page and have it printed local.
@warrenturner3987 Жыл бұрын
What is your thingiverse page?
@trailtrashgarage Жыл бұрын
Link in the video description. Tks for watching!
@marlowind6839 Жыл бұрын
Promo>SM
@trailtrashgarage Жыл бұрын
Come again?
@ryandickinson2091 Жыл бұрын
Good looking bags! Good video! What about putting them on under the seat, is that a possibility? Then you could tuck the excess straps under there as well.
@trailtrashgarage Жыл бұрын
Not really with how those Dual Sport seats bolt on. Maybe if you took off the square pads and just used the straps the fish through. But I always find the bags hang down too far when you do that but maybe it would be ok with the crash bars / luggage supports. It’s a moot point tho because the DRZ is sold!!
@colpitts350 Жыл бұрын
See you soon!
@trailtrashgarage Жыл бұрын
Very sry to have missed riding with you and Colin. Rain check?
@colpitts350 Жыл бұрын
@@trailtrashgarage we will have to ride another time!!
@djed4042 Жыл бұрын
Did you ever get the xt 250 going? I'm currently working on restoring mine having a heck of a time getting it started.
@trailtrashgarage Жыл бұрын
Yes it’s running. Although I have to admit the fueling has never been completely sorted. I think the carb is just worn and continually leaking vacuum. It’s in Newfoundland now at Colin’s new place. I believe he is going to try a new Mikuni VM carb.
@kawasakichopshop2759 Жыл бұрын
Mikuni VM 30s....your welcome
@trailtrashgarage Жыл бұрын
It’s a definite possibility!! I do like me some VM carbies!