I was about to go buy a bind plug then i seen this video and it worked thank you I thought you were trolling us. You got another subscriber
@Just_Editz-Editor3 ай бұрын
WOW 15 years old video
@jbabister3 ай бұрын
has anyone ever done this and put it back in a nitro savage x? and if so what gear and clutch bell did u run to make it fast?
@burtonkidd3 ай бұрын
You wouldn't benefit from it being in a nitro unless you were short track racing. Nitro needs the gear change to get top end as where brushless is just all power and doesn't need gears
@monke12284 ай бұрын
I love it. I would always hear it when loading in a race in gran turismo 6
@tarotfawcett27924 ай бұрын
Fxxxing Chowing gum
@EastAngliaUK5 ай бұрын
before tvs got really big like now
@moonlitstar70178 ай бұрын
Thts the disc readin wtf xDD weird noise xDDD EVERY. SINGLE. CONSOLE ALL THE WAY UP TO PS5 MAKES THIS NOISE ITS A DISC READIN
@Winterrberry8 ай бұрын
This is great 14 years later ❤
@gabrielemerenda64708 ай бұрын
Hi friends, this can done on savage x trans? And savage 25 too? I dont undestand very good. This mod its good for nitro motor to have less sttess on gear? Also is good to convert electric? This way there brake and reverse? Or need to mod with center diff?
@MisterGlitchz9 ай бұрын
Damn we really used to flex our friends list. Good ole times man.
@burtonkidd9 ай бұрын
Man I was thinking the exact same thing 😂
@delroy990610 ай бұрын
Great vid i am going to try this but was just wondering if its the same for 3 speed trans
@randymogstad Жыл бұрын
I guess the switch is possibly bad??
@audionavarro Жыл бұрын
Bravo
@cliffordpracht1959 Жыл бұрын
This 12 year old video helped me a lot 👍
@burtonkidd Жыл бұрын
Glad it helped ya 👍
@spooktaculeryt2169 Жыл бұрын
Idk why but i still have my ps3 and i love it when it does that sound my ps2 does this too when im playing batman rise of sin tzu
@meoron Жыл бұрын
It's been happening to me as well. Is it normal?
@jakemoll4531 Жыл бұрын
Hehe he said get some strippers
@killsme6957 Жыл бұрын
Thankyou sir
@sergio3234 Жыл бұрын
Bro these brakes are shit I have it too
@fourgedmushrooms5958 Жыл бұрын
Thanks great video. I didn't have correct plug so that just jammed a wire in there lol worked 👍
@supramantt Жыл бұрын
A lot of comments without answers. This comment from a forum post may help some people : Hey guys, I had a customer come in with the same issue. So I took apart the whole dash even the radio so that I could check every cable with my Power Probe. In the end I discovered that there was a little white wire from the switch that would go to the cluster and that was suppose to light it up. As I fluted the switch it would go from ground to 12v behind the switch, but not the cluster. So then i moved on to the wiring on the radio. On the radio aftermarket plug and play harness there were two orange cables, one with a white stripe and one fully orange. With the Power probe I ran 12v to the orange with white and the cluster came on. So in the end I ran a T-tap from the little white cable behind the switch to the orange and white cable on the radio, and I was able to turn on the cluster with the switch. www.silveradosierra.com/threads/2001-sierra-instrument-cluster-not-lighting-up.83226/
@RPguy1203 Жыл бұрын
Using this it can bind any other brand of receiver?
@AbdulRasheed-ee1lt2 жыл бұрын
am i the only non boomer comment here?
@TW392 жыл бұрын
Can all remotes still bind to a the correct remote to the reciever for it with just the red and black wire or do some need all 3 wires
@kingbags89382 жыл бұрын
Reading this thread I’ve come to the conclusion that no one has any clue on how the heck to solve these issues 😂
@MrJoshuaAwesome Жыл бұрын
I seem to agree. I found this one piece of info on a forum: Hey guys, I had a customer come in with the same issue. So I took apart the whole dash even the radio so that I could check every cable with my Power Probe. In the end I discovered that there was a little white wire from the switch that would go to the cluster and that was suppose to light it up. As I fluted the switch it would go from ground to 12v behind the switch, but not the cluster. So then i moved on to the wiring on the radio. On the radio aftermarket plug and play harness there were two orange cables, one with a white stripe and one fully orange. With the Power probe I ran 12v to the orange with white and the cluster came on. So in the end I ran a T-tap from the little white cable behind the switch to the orange and white cable on the radio, and I was able to turn on the cluster with the switch. www.silveradosierra.com/threads/2001-sierra-instrument-cluster-not-lighting-up.83226/
@k.r.992 жыл бұрын
It only adds to the nostalgia :)
@halekus76642 жыл бұрын
Supper!!!
@Goldensnakey2 жыл бұрын
Your video help me figure out how to use the workpiece support stop. I was having bit of a difficult time with the description the manual gave on how to use it. Thank make how all is well.
@Blkshadow442 жыл бұрын
I hate u I broke my speed control 😫😫😫😫
@burtonkidd2 жыл бұрын
Now why did you go and break your ESC?
@dhilankerai35852 жыл бұрын
After run oil next time 😂
@automotiveaddiction4282 жыл бұрын
I have to fix mine..does the same thing...but my 2002 has driver and passenger and the fuse panel under the hood
@michaelmacmillan19812 жыл бұрын
I spent the day trouble shooting this same problem on my 97 F150. Assumed right away that my instrument cluster bulbs were out. Pulled everything apart to replace them, ended up not solving the problem. Went through all of the fuses that related to lamps/ illumination. Still nothing. And then came across this video and the comments!! Ended up being my parking and tail lamps fuse (Position 7), in the power distribution box. Grateful for this video and comments. Cheers :)
@zombitch_slayer53633 жыл бұрын
Mine does the same is it something to worry about is it normal?
@jjonxthxn3 жыл бұрын
I’m having the exact same problem did anyone end up figuring it out?
@randallblake12133 жыл бұрын
Why not just strip the ends of the black and white and twist them together?
@rooseveltrainesjr15363 жыл бұрын
Thank u buddy. I converted my 4.6 savage to electric. An the truck ran find. Until i let my nepthew. Play with it an . he gave it full throttle. An mess transmission up. So i pull it down. An found what i believe first gear was shredded. I couldn't believe they put plastic gears with. Harden gears. So i replaced with harden gears. An i wanted reverse. So i found your video. Thanks again. Ill be putting it back in an testing
@jonhidalgorojo9353 жыл бұрын
HPI Savage Forum
@keithbutler63613 жыл бұрын
Thank you very much, your video has helped me out tonight because I could not find any bind plugs and I was stuck , I followed what you did and it worked first go , my crawler truck is working great now with it’s new receiver, keep making videos they are helpful to use guys trying to learn , stay safe mate ...
@user-uj8lq7kq7q3 жыл бұрын
You can get a new one from eBay but then you got to do millage correction. Or you can get old one fixed. Hope this helps www.upfix.com Here is the service link www.upfix.com/product-category/repair-return/icp-instrument-cluster-repair/
@jadolive-umut91753 жыл бұрын
wow,12 years old...
@ewanewan42393 жыл бұрын
the Nitro car have a other servo in it .
@ewanewan42393 жыл бұрын
Hallo there can i bind any servo whith the remote ,i have a spectrum DX4S remote but not the servo .
@Yes-tz9kq3 жыл бұрын
I got the strippers but they want cocane what do I do?
@ewawiniarska65463 жыл бұрын
What !? I AM on 2021
@max26343 жыл бұрын
You need to change your laser or Buy new game
@HookLineandKyleP3 жыл бұрын
Cool video, I fish Dunnville a lot
@Graeme7583 жыл бұрын
lolol. How to make a bind plug: Bridge the top and bottom pins of the bind port on your receiver. There, saved you 5 minutes and 50 seconds.
@scraplifelivingthedream43313 жыл бұрын
Actually glue is needed. . I got the Kreg jig too and the glue is needed to make the piece hold stronger