Comparing with normal trucker's hitch: Pro: barely autolock Con (big con): high friction => lost of tension power
@New2chem21 күн бұрын
I like your videos and the idea, but I wouldn't trust a Black Wall hitch.
@jcorrea859728 күн бұрын
I think this video was great, The only thing I would suggest would be maybe extra reputation show me you tying the knot more times. I hope you keep making more videos thank you.
@oskareem28 күн бұрын
Unnecessarily complicated
@Branno46Ай бұрын
What planet are you on to say it’s a simple to tie, maybe for you a pro, but not everyone is a contortionists with their hands, you move like a magic show and bear in mind what we see in the screen is opposite from the side your seeing , difficult to say the least so not impressed .
@yourknotunderstandingАй бұрын
Apologies, but this video is not for beginners, and also it's nearly my first attempt at making an instructional video. I made this video so that my idea would be documented, for people who are experienced at tying knots of this type. Future videos will be better for beginners, I hope. This video documents a *special variation* of what should already be a familiar knot. Again, not for beginners at tying knots.
@ds197712 ай бұрын
I wouldn’t even trust my clothes on a line with this knot - certainly not for tying down anything in a truck. The sheep shank version of the truckers hitch is very unstable. I’m surprised to see it advocated for as the correct method by anyone.
@stefanotripi59452 ай бұрын
bravo
@ronperrault81823 ай бұрын
Very nice! I saved it.
@KeepItSwift3 ай бұрын
This is among one of the fastest Trucker's hitch hand techniques I've seen so far. Same neat autolock Blackwall hitch that Flynn's Trolley knot used. Very nice! Bowline, although very commonly used, might snap with heavy tension, so a secure Bowline variant might be better in certain cases. For added security, the half sheepshank loop can be tied onto the main line, mentioned as a Trucker's Sheepshank in another video. Hope to see more! Cheers!
@yourknotunderstanding3 ай бұрын
Yes. I end up achieving what Flynn achieves here: kzfaq.info/get/bejne/Z9J8ntKIr7bRhKc.html By sending the line around the adjacent taut line before coming back into the loop and under itself, the blackwall hitch is made much more stable. A blackwall hitch through a free-standing loop (without the support of an adjacent taut line) is very unstable. Flynn achieves his results by threading the end of the line through the loop. My way avoids touching the end of the line. I came up with my idea before seeing Flynn's knot. But of course I cannot prove that. Here, as you suggested, the Trucker's Sheepshank has the good idea of securing the half-sheepshank to the main line by tying it, in a half-hitch, around the main line. I like that, because it's easier than doubling up the sheepshank by passing the loop through TWO loops (or a cow hitch) in the main line. kzfaq.info/get/bejne/pKtdY7uYzLTcc3k.html I know there are all kinds of hitches, but what do you have in mind over a simple bowline?
@yourknotunderstanding3 ай бұрын
Here's one of the ideas I based my knot on. kzfaq.info/get/bejne/gKiYasKU3JiRYac.html
@ryanbeard11193 ай бұрын
Dont break your bed.
@yourknotunderstanding3 ай бұрын
It's not a bed. It's an Ultimate Body Press™dip bar. Not gonna break.
@meanwileinthedesert..23204 ай бұрын
This is brilliant! Borderline witchcraft. I will certainly be doing it this way for now on. With one additional turn. I would lock in the anchor loop with an additional half turn from the main line. Creating a single prusik loop to hold everything. Probably unnecessary. Just for peace of mind. Still brilliant! And anyone who says otherwise is jealous they didn't think of it.
@yourknotunderstanding3 ай бұрын
I think you mean by creating something that looks like a cow hitch in the main line. Basically so you pull the line through three loops rather than two. Yes, that does make it more secure.
@Vaso7354 ай бұрын
Thank you! I'll try to do 🤝
@johnr55456 ай бұрын
Love it god bless
@yourknotunderstanding6 ай бұрын
Thank you!
@JaToCos-LivingSoul6 ай бұрын
TY 💗 ❤️ 💖
@JaToCos-LivingSoul6 ай бұрын
TY 💗 ❤️ 💖
@JaToCos-LivingSoul6 ай бұрын
👍🏾
@JaToCos-LivingSoul6 ай бұрын
TY 💗 ❤️ 💖
@yourknotunderstanding6 ай бұрын
You are welcome!
@meherbabaisgod-lo8gd6 ай бұрын
🥰🥰😘😘😍😍
@giorgosKarag6 ай бұрын
It is a great self-locking knot BUT it is NOT intuitive. I think most of us (if not all) will forget how to do within a day or so even if practicing a lot. There are no tangible points during the process to stick in the brain and remember. Therefore, it is useless for me
@yourknotunderstanding6 ай бұрын
It's true that there are steps to learn. If you do it often enough, you remember it.
@johnr55456 ай бұрын
Nice thanks god bless
@yourknotunderstanding6 ай бұрын
Thank you too!
@memyselfandeye12346 ай бұрын
learnig a truckers hitch horizontally .... because thats how they are used ..... NOT... fail.
@claudearnold73416 ай бұрын
Perfect tutorial. And your English is very easy to understand for a french guy like me 😁
@richardc62696 ай бұрын
Y do this extra step??
@yourknotunderstanding6 ай бұрын
What extra step?
@richardc62696 ай бұрын
When u make the loop u don't just pull a loop through and use that as ur anchor. Pull ur working end through anh tie it off. Am i wrong??@yourknotunderstanding
@michaelguthrie23446 ай бұрын
EXCELLENT evolution of knot EXCELLENT explanation!
@yourknotunderstanding6 ай бұрын
You are right that it is an evolution. Everybody should learn the regular trucker's hitch. It's the standby. But there are some problems with it: 1. you need to send the end of the line through a loop. 2. You must try hard not to lose the tension you put into it before you tie it off. I made some changes to address these problems. That doesn't mean I didn't make the knot less valuable for some situations.
@vitalischumaher40956 ай бұрын
Das ist Grieft
@BushcraftingBogan7 ай бұрын
This version looks great but I didn't learn much in how to tie it. Do another video from your standpoint (ours) only.
@JohnPaquette7 ай бұрын
Yeah. Good idea.
@w.harrison72777 ай бұрын
Very cool! I always wanted to know how to do a truckers hitch. The part that hung me up the most was after you have the double loop in your left hand, which of the two lines are you supposed to grab with your right hand through that loop? Once I figured that out by trial and error it all came together.
@yourknotunderstanding6 ай бұрын
I'll be more clear next time. Thanks.
@MOTIVATIONEXTREME7 ай бұрын
untie video ^please great job by the way
@yourknotunderstanding6 ай бұрын
Well, I thought I showed how to untie it in the beginning. . .
@MOTIVATIONEXTREME6 ай бұрын
@@yourknotunderstanding 🙏🙏🙏
@regiejames9637 ай бұрын
This version of truckers hitch is not useful with heavy load. And the display is cumbersome: very difficult to follow.
@JohnPaquette7 ай бұрын
It's perfectly simple, but not perfectly secure. Next time I'll film differently, and I'll put in more disclaimers.
@albybak89897 ай бұрын
I have seen hundreds of these hitches vids and this one is THE BEST!!!!! Perfect tutorial AND perfect design; no need for pulling ALL the excess rope through the bights. This is one YOU SHOULD LEARN!!!!!!!! and SUBSCRIBE TOO!!!!!!!!!!
@JohnPaquette7 ай бұрын
Thanks!
@yfelwulf7 ай бұрын
The MOST DEADLY Truck knot ever devised and it went out of use decades ago due to the fact it slips often during initial loading and falls apart if the rope slackens. NEVER USE THIS KNOT if safety is involved light non critical use only.
@JohnPaquette7 ай бұрын
You are right. This specific version of the trucker's hitch *isn't really for trucking*. It's good for tying up a clothesline, or a ridgeline. There are certainly ways of making this knot more secure. "Perfect" here doesn't mean perfectly secure under battle conditions. Sorry about that.
@jakemccoy6 ай бұрын
I agree. Learn a method that will withstand tampering, car jostling, etc. Most people are only going to learn one method. So, learn a method that always works in all kinds of ropes and scenarios.
@jasblick99847 ай бұрын
I was a trucker and this, is WAY too many steps to make a truckers hitch. Not putting down Your way. Just saying there is a simpler way.
@JohnPaquette7 ай бұрын
The simpler way may be more secure, but it isn't self-locking, and it requires you to work with the far end of the line. Given *those* requirements, I like my way. I learned about self-locking from FirstClassAmateur, and the half-sheepshank from OutdoorAcademyAustralia. I put them together in a new way. But, of course, different requirements call for different knots.
@michaellatham1971Ай бұрын
Great combo technique. Solves all the problems.
@mingshey7 ай бұрын
It’s a work of art. Thanks for sharing!
@yourknotunderstanding6 ай бұрын
Thanks!
@pedroclaro78227 ай бұрын
If anyone didn’t learn the knot well enough, go to Dave Canterbury’s best ridgeline for everyone. He shows the truckers, this knot, and what he believes to be better (I still prefer this, or using a wooden toggle in the truckers loop like Felix Immler rope tensioning system).
@KenOlstad7 ай бұрын
Elegant method! As others have noted, it was really hard to track through the camera angle switches, but eventually I got it, and I love it. If you're worried about the half sheepshank spilling under load, start with two loops over your hand instead of one, i.e. either a clove hitch or a cow hitch, to pull the bight through.
@yourknotunderstanding6 ай бұрын
Yes. I know the cow hitch method is more secure. It's just a bit harder to tie.
@nikbivation7 ай бұрын
very nice thank you!
@RujioWR7 ай бұрын
Thank you for sharing this neat technique. I used it a lot and it really holds up. But if you start to really max out the tension I find that the sheep shank can break. But I am talking like marlin spike tension or actually securing a heavy load on a vehicle. Or using multiple truckers hitches to create a pulley system. For everyday use, e.g. setting up a tarp etc. this is a very good version. Esp. since the length of the rope does not matter since you dont have to touch the working end "end" :D
@JohnPaquette7 ай бұрын
Right. "Perfect" here means "elegantly simple and generally useful" as opposed to "super heavy duty and rock solid dependable under battle conditions."
@yourknotunderstanding6 ай бұрын
@JohnPaquette is me. The half-sheepshank certainly isn't valuable if you want to add on additional truckers hitches to increase mechanical advantage. The tension gets unbalanced, and the half-sheepshank doesn't hold. If you want to do that, I recommend using a cow hitch rather than the half-sheepshank.
@fairflower69347 ай бұрын
Please explain me. I tried tie this and I think it's not perfect. With huge load the knot will be untied. And another loop is good way for lock knot while tieing but it kills advantage in power while ordinary hand tieing (without extra loop you get the double advantage in power)
@fairflower69347 ай бұрын
But I really like this video! It's awesome way to make a knot
@JohnPaquette7 ай бұрын
No knot is perfect for every application. What I like about this way of tying the trucker's hitch is that I don't have to deal with the other end of the line. I also like the self-locking "Blackwall" hitch. The normal trucker's hitch has neither of these advantages, but it might be more secure. There are certainly ways to modify my knot to make it more secure.
@crackedman1238 ай бұрын
That's awesome. New favourite knot.
@yourknotunderstanding6 ай бұрын
Thanks! I use it all the time for putting up temporary clotheslines and such. Not so much for tying down bundles on the back of a truck.
@Colt38548 ай бұрын
Terrible video, i got giddy just watching it.
@foxxi84408 ай бұрын
wonderful video and very helpfull. What type of cord did you use?
Right you are @JohnPaquette. BTW, @JohnPaquette is me.
@olegsl37268 ай бұрын
Добрый день. Благодарю вас за интересный узел. Желаю вам крепкого здоровья, удачи и благополучия! 🖐️🖐️🖐️
@JohnPaquette7 ай бұрын
Спасибо! Я рад, что тебе понравился узел. И тебе удачи!
@ajmacbeth8 ай бұрын
I really like this version, it's the fastest to tie I've seen. Friendly suggestion, if possible, capture video of future knot tutorials entirely from user POV. Good stuff, thx
@latetodagame18928 ай бұрын
Wow! Beautiful!!👍
@lesblack4138 ай бұрын
You have made a very easy knot to tie look terribly hard because you keep changing the view. A very poor demo in my opinion. You need to watch someone else who knows how to demo it properly!!
@JohnPaquette7 ай бұрын
I'm learning. Sorry for being confusing.
@yourknotunderstanding6 ай бұрын
@JohnPaquette is me.
@trutrek9138 ай бұрын
SO quick. I've seen guys spend over a minute tying a trucker's hitch and then release it and re-tie because of too much slack or whatever, this method looks so much better.
@jakemccoy6 ай бұрын
This will take a long time too if you don't practice it.
@trutrek9136 ай бұрын
@@jakemccoy Might be easy to do, but that can make it easy to forget if you don't practice like you said.
@jakemccoy6 ай бұрын
@@trutrek913 I have a technique that always works for me in all kinds of ropes and scenarios. I failed to practice it for several months yet still remember it. I am quick with it too because it is muscle memory. If you have to go look up a knot, well, there goes the speed.
@steven.h06298 ай бұрын
Finally someone teaching a proper Truckers Hitch.. been in use since the Vikings sailed the seas.
@markm81887 ай бұрын
They had no trucks back then. 🤔
@yourknotunderstanding6 ай бұрын
Thanks. The main value of this version is that you don't have to find the end of the line and thread it through a loop. And the half-sheepshank is frequently plenty secure enough. But of course, under jerky conditions, it's not dependable.
@New2chem21 күн бұрын
@@markm8188 for tying loads down on boats
@bimpo18 ай бұрын
Very nice knot but ive got one even better
@JohnPaquette7 ай бұрын
Do share!
@yourknotunderstanding6 ай бұрын
Yeah. Do share. BTW, @JohnPaquette is me.
@stevenrobertson44708 ай бұрын
Excellent knot! I get it right about 30% of the time! I'm a 71-year-old Boy Scout who never grew up and I love this knot. I need to practice it 100 times or so until I understand the principles behind it... mental gymnastics!
@AnonymousWon-uu5yn8 ай бұрын
To help, remember that both loops go clockwise and to make the second loop twist the line clockwise to create the second clockwise loop.
@Edwin-pq6dg5 ай бұрын
@@AnonymousWon-uu5yn one clockwise and the other loop counter clockwise