Net Buddy

Пікірлер

@bigchunges5126 Ай бұрын

Beckett 👍

@willfee1 Ай бұрын

Mounted on barrel but i cant get forward mode to work any ideas on this thanks. When i put the ML in postion its showing the bottom i assume up and down the screen.

@markzingler1762 Ай бұрын

Do you have any cable protectors for sale?

@NetBuddyFishing Ай бұрын

Not plastic ones. I switched to a rubber one that is included with a sleeve.

@HaroldPiellusch Ай бұрын

How do you collapse your net with the attachment on the net

@NetBuddyFishing Ай бұрын

Hi Harold, you can’t.

@scottb4971 Ай бұрын

Would you mind going through your settings I cant get that good of a image no matter how hard i try.

@erekyang908 2 ай бұрын

Can we get a new updated video? since it now comes with the neoprene sleeve and that rubber tube

@upthecreekyt 4 ай бұрын

What if you wanted to use perspective mode mounted on the barrel?

@NetBuddyFishing 4 ай бұрын

Not really possible in a good way. Would need to get something like a cornfield mount, and you’d experience a lot of vibration and wobble in perspective on it.

@christophereric1407 4 ай бұрын

Watching one year later. Any experience with your system and the Ulterra automatic deploy? Cable management is the concern. One could not wrap the cable around the Ulterra post like you do with the Terrova. If there is a tangle or knot, the Ulterra deploy motor is strong enough to pull the transducer cable off the transducer. Which is not good. Perhaps I try to rig it up with 14/2 wire in a rod sleeve as proof of concept before I tie my MegaLive transducer cable to the Ulterra bullet. Thoughts?

@NetBuddyFishing 4 ай бұрын

You can’t do this with an ulterra. You’d need a different way to do cable management. I’ve had this on my terrova now for 6 seasons no issues.

@currentelectricllc.2923 4 ай бұрын

are you using lvs34?

@NetBuddyFishing 4 ай бұрын

No, 32 in this video

@patrickethier6190 4 ай бұрын

How can I purchase one ?and will it work on an advantage trolling motor on a tiller in the back?.. I would think it would be the same concept it's on the barrel... Let me know what you think and I'd like to purchase one if that would work for me.

@NetBuddyFishing 4 ай бұрын

Thenetbuddy.com. You won’t be able to wrap the cord like that but the barrel mount should work.

@daveholte7658 4 ай бұрын

Looks like a great alternative from pole mount. But assuming I would not be able to tarp and travel with boat cover as the pressure on the 334 would not be good? Thoughts? Great video

@jmg1910 5 ай бұрын

How do you find the livescope when you are spot locked and vertically jigging for walleye or lake trout? Is it a big problem when the motor adjusts direction?

@dannylang7971 5 ай бұрын

Is this barrel mount a 0 degree mount.

@NetBuddyFishing 5 ай бұрын

Technically No, but you just rotate the hose clamp around the barrel until the ducer is at 0.

@dannylang7971 5 ай бұрын

@@NetBuddyFishing do you just eye ball it or do you use a level

@NetBuddyFishing 5 ай бұрын

@@dannylang7971 I just eyeball it.

@dannylang7971 5 ай бұрын

Thank you sir for replying.

@joshsimmons2044 8 ай бұрын

This is not on your website

@NetBuddyFishing 8 ай бұрын

I discontinued the plastic protector. I did not like that it created a rub point on the cable. I changed it to a rubber one with neoprene sleeve.

@joshsimmons2044 7 ай бұрын

@@NetBuddyFishing I ordered what you sell now seems to be good quality thanks

@davidmorrison3328 8 ай бұрын

Says page us no longer available how do I get

@NetBuddyFishing 8 ай бұрын

Updated the link. Should be good now. Thanks

@jones1394 9 ай бұрын

I try to see after you put it on how much kickout do it ha e??. I'm trying to mount myself to the trolling motor but looking at it fron the front that kickout looks like its doing out into space instead of in front of the trolling motor. Suggestions???.

@NetBuddyFishing 9 ай бұрын

I am not following what you mean by kickout?

@carytoms9500 9 ай бұрын

So the trolling motor doesn’t interfere with the live scope ?.

@NetBuddyFishing 9 ай бұрын

@eyre1720 11 ай бұрын

I don’t see a product either.

@NetBuddyFishing 11 ай бұрын

Was a teaser. Look up Musky Buddy

@donnysbackroadoutdoors5088 11 ай бұрын

Will this work on the Minn kota ulterra

@NetBuddyFishing 11 ай бұрын

not this method. There is a bike lock coil method that works good for Ulterra cable management

@christophereric1407 4 ай бұрын

I asked donnys question just now. Might you show us how the bike lock coil works on an Ulterra?@@NetBuddyFishing

@HuntGatherChatters 11 ай бұрын

You guys definitely have those musky nailed down. Congrats!

@donnysbackroadoutdoors5088 Жыл бұрын

How do I order the cable protector?

@NetBuddyFishing 11 ай бұрын

I changed it a little bit. This is better thenetbuddy.com/universal-live-imaging-cable-sleeve-and-rubber-cable-protector/

@MrDereksykes Жыл бұрын

So in this video, that is a zero degree mount, barrel bracket? Wondering if the barrel mount that comes with the LVS32 is standard zero degree or purchased separately?

@NetBuddyFishing 11 ай бұрын

It’s the standard barrel mount, but it’s set at 0 degrees before I tighten it down.

@MrDereksykes 11 ай бұрын

@@NetBuddyFishing Have you had any experience fishing shallow water (10' or less) with the ducer being mounted to the TM barrel? Wondering if there is any interference or noise due to barrel mount in shallow water (like for crappie fishing open water suspended fish)

@NetBuddyFishing 11 ай бұрын

@@MrDereksykes yes, all the time, no barrel interference

@recordattheroom Жыл бұрын

Very good video I do the same thing I switch to the pole ducer and now I’m back on the trolling motor. That’s the only way to run it bass fishing have had zero problems.

@NetBuddyFishing 11 ай бұрын

Yes, I couldn’t imagine not having it on the motor.

@CombatCameraAirborne Жыл бұрын

is there any way to have this type of set up on an Ulterra?

@kevinlynch6799 Жыл бұрын

Outstanding Product. Great On-the-water Demonstration. Well produced Video and sound tracks. If you can share the lures used, would be appreciated but respect if you can not. Be well.

@zethpetrie23 Жыл бұрын

Can’t find this mount anymore on your page for the lvs32

@NetBuddyFishing 11 ай бұрын

I changed it so it’s not plastic. thenetbuddy.com/universal-live-imaging-cable-sleeve-and-rubber-cable-protector/

@Haynesvilleguide Жыл бұрын

Nice fish!

@michaelupchurch3769 Жыл бұрын

Nice crappies what kind of rod are you using

@user-uk7hh2ng6i Жыл бұрын

Where do you get that barrel mount at??

@NetBuddyFishing Жыл бұрын

Www.thenetbuddy.com

@Envy_37 Жыл бұрын

Scary

@ALMISHEA Жыл бұрын

how did you mount your live scope transducer to an ulterra?

@NetBuddyFishing Жыл бұрын

Garmin barrel mount. Help the cable during stow and deploy. I use a terrova now though.

@timculpepper8730 Жыл бұрын

Where can I buy the cable connector.? I did not see it on the web site. Thank you!

@NetBuddyFishing Жыл бұрын

Discontinued, using electrical tape at the base of the transducer is sufficient to connect a rod sleeve.

@Oleg-mv7bh Жыл бұрын

What rod/ line are u using?

@floridaflash Жыл бұрын

I’m jealous! Always wanted to go Muskie fishing.

@EdMorrison-ie7uc Жыл бұрын

interested in both items you have listed in your video.

@NetBuddyFishing Жыл бұрын

I discontinued the cable protection, electrical tape will work. Barre Mount is available at thenetbuddy.com

@AllSeasonFishing Жыл бұрын

Did you use spinning or casting rod sleeves?

@NetBuddyFishing Жыл бұрын

Casting.

@toddyell4440 Жыл бұрын

Hello, having it mounted to TM, and on spotlock, will that affect the imaging? I have mine on a mounted and image is great, but always looking for better system. Your mount says for hummingbirds, would it work with Garmin Force?

@NetBuddyFishing Жыл бұрын

No interference. I have some other videos where I record the screen while targeting walleyes.

@aaronambur Жыл бұрын

Good video and appreciate it. When you automatically stow the motor, do you need to baby sit it? Meaning, I see when you manually stowed in in the video, you grabbed the loops and brought them up over the cradle. Thanks....

@NetBuddyFishing Жыл бұрын

I would not do an Ulterra Auto stow and deploy this way. You will likely pinch the cable. There is a video out there where they uses a coiled bike lock on the side for the ulterra cable, that seems like a much better idea.

@aaronambur Жыл бұрын

@@NetBuddyFishing okay.... Just saw that you were showing an Terrova and not an Ulterra. My bad. I will look for that video. Appreciate the quick response.

@GFRESH38 Жыл бұрын

Is the cable protector on sale? I dont see it on your site. Great vid btw!

@After5Outdoors Жыл бұрын

Ive never eaten rock bass. I catch some big ones up on LOTW from time to time, next time I do I will fry one up and see what they taste like... Hopefully the open water season will get under way, sooner than later. Really diggin that Livescope transducer cover you sent. Appreciate it.... Great video, hope to see ya on the water soon

@NetBuddyFishing Жыл бұрын

They smell terrible when you filet them. Don't let it throw you off. Launching a boat tomorrow...

@After5Outdoors Жыл бұрын

@@NetBuddyFishing Ill take your word for it and give it a try! Good Luck

@anothermuffin1 Жыл бұрын

Hybrid not full pumpkin seed

@Tighterlinesfishing814 Жыл бұрын

So i just mounted mine like this yesterday but the install directions for forward mode did not have it sitting like you had. It had it slightly canted upwards and forward not straight???

@NetBuddyFishing Жыл бұрын

The 32 or the 34? The 32 to top should be flat for forward mode. Or, it can be mounted facing the other direction, where then the bottom would flat. The 34 has a slight tilt up.

@Tighterlinesfishing814 Жыл бұрын

@@NetBuddyFishing Yup my bad i didnt notice that was a 32. Your spot on man.

@juliosdiy3206 Жыл бұрын

Giant sunny n rock bass awesome!

@Bshug87 Жыл бұрын

I can’t find the cord saver on your website am I over looking it?

@NetBuddyFishing Жыл бұрын

Hey Brandon, Yes, I discontinued them. I found they were not needed after a year of using, with the changes Garmin made to their cord. Electrical tap to attach the cable sleeve would work good. I did this for 4 years with no issues.

@Bshug87 Жыл бұрын

Ok sounds good thank you

@jasoncross8940 Жыл бұрын

Hey Just watched your video today pretty good good job. Myself I have never fished The fox but I’m hoping next year I will!! I live in Manitoba Canada so we go for Greenbacks

@NetBuddyFishing Жыл бұрын

It's a zoo most days! Some day I'd like get chase those greenbacks, they look awesome.

@steveolson8100 Жыл бұрын

just curious, did you try the perspective mode? maybe would not work as well in that deep of water? You have a nice boat skeeter for sure. Fishing in that wind was impressive, I personally would have my life jacket on....thanks

@NetBuddyFishing Жыл бұрын

I don't like using perspective on the trolling motor, and for this bite specifically, forward mode is best as the goal is to keep your jig above them for them to come up and eat.

@ruebenlewellyn-en8fj Жыл бұрын

Do you think you could run the wire down the shaft from a older Terrova?

@NetBuddyFishing Жыл бұрын

I have not explored that, so I am not sure.

@TimSmith-jc2ld Жыл бұрын

Can you post a link for the cable protector? I am not finding on your webpage.

@NetBuddyFishing Жыл бұрын

I discontinued it, I don’t think it was adding a lot of value. Electrical tape at the base to attach the sleeve will do the trick. I did that for 4 seasons before making the protector without issue.

@TheNeth78 Жыл бұрын

I must not have been out there on the day you recorded this. I watched twice just to make sure. Thanks for putting her back to make more babies.

@michaelupchurch3769 Жыл бұрын

Those are some very nice rods I like them

Ең жақсы KZfaq

Пікірлер