it doesn't have those functions available.

the size I used is a 6mm allen key

I was able to get a new one from venom motorsports but even the new one is still off by a few miles. I have a new video coming out soon where i install a whole new different cluster

@@nathanschnabl9415 yes the R3 itself is pretty much still the same in that area only difference is the body and headlights are different, so this video should still work out for you

ill keep that in mind =) so far you have been an Excellent student on my bus keep up the Great work!

@@ACProductions77 thank you!

yes they have clear, lightly dark , medium and very dark you choose the one you want.

@@ACProductions77 Okay very well, and which video did you take? the very dark one? on the zero Gravity site it's dark smoke, is that it?

@@dratomone1549 yes dark smoke, I didn’t choose the complete black one as i still wanted to be able to see through it

@@ACProductions77 Do you have the link to the site where you bought the bubble? I would like to take it as black as possible ahha

@@dratomone1549 here is where i bought mine >> amzn.to/3MlgQqN

thats great luckily you where able to re-use the oem one.

just gives added support to the shifter shaft since it sticks out a bit

click on link>> amzn.to/4dTd17O these are the ones I always use in all my installs

@@ACProductions77 thank u so much! They just shipped out my bike. Ordered on the 11th I paid for the assembly done for me. All gotta do is unbox and probably turn on the breaker and charge it idk if it’s gonna come fully charged since I paid for the full assembly

@@DrinkableTrees it will come 70% charged

I just open the oil cap to let the condensation out then after that re tighten it, but honestly after going for a ride there is no need to do that as it doesn't build any after a good ride, it could be cause when i installed it , it had been a very long time since i last rode so that was really a cold start on the bike.

lol that's why i have a section on my ch called "super shorts" 1hr explanations reduced to under 10secs with little to no talking here is link to that section>>kzfaq.info/get/bejne/mJOdpLuLz525l40.html

there are a few out there here are just a few I found , click here on the links or copy & paste to take you straight to them>>amzn.to/4cxH5EQ, amzn.to/3YQxjdN, amzn.to/3yIqX5O

they make them this way so you can spend money in modifying them to make them faster

@@ACProductions77 .. it's crazy looking at all parts in motorcycle vs. Ebike not to mention durability thickness in suspension... I guess your right, it's the market willing to pay more for less and manufacturers looking to profit off upgrades...

One of the biggest reasons is that these use lead-acid batteries instead of lithium ion batteries. Lead acid batteries are so much cheaper.

thank you =)

hopefully this works out for you

you should be able to just remove the padding.

@@JMProductions669 most are 10mm bolts and rest are Phillips screws small size the ones that go behind the forks are Phillips as well but tiny size

@@ACProductions77 do you happen to know the exact size of those small Phillip screws?

@@JMProductions669 if possible I can take a pic next to a ruler for you and post it under my comments section of my utube unfortunately I don’t know the exact measurements of the screws

@@JMProductions669 go to my community tab or section on my utube ch. I posted the pic of the screws there

@@ACProductions77 thank you so much!!!! Appreciate the help my man.

@@DrinkableTrees I have a video coming up on a new gauge cluster install unfortunately not all will work with the stock controller of the evader, I’ve already installed a more powerful controller on mine video of that is up on my ch for members only click join in any of my videos to watch those special ones under the “fun stuff “ section. I can do a video showing how to modify and change the oem cluster

@@ACProductions77 i might have to look into that lol I have 0 mechanical skills and first motorcycle so this should be a fun project I do have a question though.. if I wanted to install a apple carplay unit I should be able to right? idk wiring so I might have a professional do it for me

@@DrinkableTrees that might take ailttle more power away from the battery of the bike making you have less travel distance, at that point if you want it to be able to listen to music i suggest getting this BT speaker that would attach to your handle bars amzn.to/3SOTYU3 or anywhere on your bike with some velcro straps or zip ties

@@ACProductions77 I’ll look into that I did watch ur video about the 12v batteries theoretically speaking I should be able to wire the apple CarPlay unit to that and get like a plug to charge the 12v battery?

@@DrinkableTrees You’re such a good possibility you could do that if you would like to wire any accessories which that’s probably what I did I also still have to make the video on a charging cable system for it which is coming up just that I’ve been preoccupied on finishing up the new controller for the Evader and also doing another video on installing the upgraded LIFPO4 battery. I’ll probably take a picture of all the stuff that I still have to install on the invader on my community post as I still have a lot to do on that bike I’m also going to be entering in a motorcycle show so I’m kind of working on that to get the bike ready And on top of that also making a custom bracket to be able to have a different type of speedometer on the bike

i guess it just depends on the engine

@@JMProductions669 are you looking just for the seat itself the oem style? You will have to contact venom directly for it

@@ericroman9126 I’m in IL and yes there were big issues to get it registered I have a video coming soon talking about my experience and how to get it registered in any state please sub and turn on notifications soo you will get notified once the video is up

@@aggrosaxon459 lol the yellow grom isn’t mine its a friends, I only own the evader i just did a controller upgrade now I’m able to do 40mph next is battery and hub motor that will push the bike to 70mph

@@aggrosaxon459 I already have 2 full size bikes a R3 & gsxr1k-R

I have that video on my ch already here is link to it> kzfaq.info/get/bejne/qrljkq-pyanJYqs.htmlsi=mB9l8AnEPQPF6HnC

@@ACProductions77 thanks man, will definitely check it out. My 2011 750 went dead today. It started up like normal…then like 2min into warm up is went all haywire and cluster went nuts. Then it completely shut itself off with no power to nothing.

@@armandoballesteros7487 np hopefully it helps , if not it could be you have a short happening somewhere on the bike, I also have videos on that as well on my ch.

how badly is it damaged? do you have the broken piece to it? if you do you can probably plastic weld it enough to still be usable. here is link to the plastic welder i use>> amzn.to/4dq99v0

​@ACProductions77 it s the metal clip, and still there, I believe. It s all bent. Idk what the previous owner was trying to do. I tried silicone, but the vibration, I guess, made lose again, and I went back home last knight ghost rider mode. I gonna check out the link tks. I almost bought an used harness to get the metal clip on eBay.

@@ACProductions77 THE METAL IS ALL BENT UP AND IT CAN HOLD THE MAIN HARNESS CONNECTOR TO THE HEADLIGHT HOUSING CONNECTOR.

@@DrtCarlos if its metal and still on there try using locking pliers to bend it back straight.

yes its just a decal sticker, after you remove it use goo gone to remove any left over stickiness> amzn.to/3YuaSuN

@@ACProductions77 oh great, yes it's just a sticker stuck on the bubble, I thought it was engraved/embedded in the bubble! I'm going to take it for the gsxr 1000 L7 then :) thank you for the help my friend!

@@dratomone1549 no problem glad i was able to help, as thats what i did on mine as well and removed it.

thank you it took me a while to find something that went well with the video.

@@GaryMickelson-n1j this is my 1st all electric motorcycle but my 3rd motorcycle in my line up. I started riding in 2015 with the at the time all brand new 2015 Yamaha R3 took the beginners riding course and the advanced riders course at the track, then in 2022 bought a brand new Suzuki Gsxr1k-R, then in November of 2023 I was sent out this 2024 venom Motorsports E-Vader to do content on as just a review of it but it has turned out to be an amazing electric motorcycle that has soo much potential that not many people know about and I seem to be the only one doing current content on.

@@GaryMickelson-n1j to answer you question In a shorter version I feel like I’m a average rider.

@@strangerjank3445 once you let off the accelerator the rotating power from the hub motor gives back to the battery giving it a slight charge depending how far you coast without using the throttle.

@@strangerjank3445 once you let off the accelerator the rotating power from the hub motor gives back to the battery giving it a slight charge depending how far you coast without using the throttle.

@@chrisbielecki4989 rejet? I don’t understand your question

you don't need to tune the bike for a slip on but it is recommended.

@@moomoomilk60 ah i understand now , you dont have to re map the bike but if your looking for the best performance from the slip on and race filter then yes its recommended to get your bike tuned for the new upgrades to maximize on the power.

check battery cables make sure they on tight then check battery voltage charge if needed

I had the EXACT same thing. No dash lights, nothing. I’ve got zero power. I’m trying to get the starter relay out and found this video. I’m trying to figure out how to get it out, lol.

I ordered the starter motor and alternator stator, waiting for them to come.

@@kristingoodman9799 I just changed out all my fuses and cleaned terminals/connections and at least got weak power to the dash. I need to start a support group for Derek Zoolander’s school for guys who don’t know electrical good and want to learn to other stuff good too’

@@alexlevinson8629 normally its being held by a clip or inside a rubber box that makes it difficult to pull out

no unless you select share on your end. they will hear nothing only your voice when you talk.

Thanks a lot brother 🙏🏼

Thank you I try my best to be as detail as possible as I would like to see a video when looking to install something.

also dont forget to sub & check out all my videos

it may not work the bigger 50 will work better

im not 100% of what the internals exactly do.