Looks good. I went with the Toyo 215s as well on Vox Montes and love the 15mm offset. What pressure are you running in yours? Factory pressure feels soft @ 33/32. But they max at 44 and that seems like too much.
@whisperproductions98804 күн бұрын
What about the message?
@davecurrie65784 күн бұрын
Brilliant video, thanks
@Existinginthespace7 күн бұрын
Thanks for the video, it was really informative. The subaru jackstand really came to the rescue in helping me remove the 17mm bolts and removing a stuck rotor, i just had to get creative with the angles and using the cars body.
@jeffreyostrom28037 күн бұрын
I just got the same exact boat last week.mine is a 2011 lows with the same motor just curious when you run your motor with the muffs on in the driveway does the water coming out of the hole when it’s peeing out get hot? Mine pees out good but seems a little on the hot side. Thanks
@angrycanadian185112 күн бұрын
Once its dry how long does it last?
@Subariblet12 күн бұрын
Its been on the truck now for 5 years and still looks brand new
@angrycanadian185112 күн бұрын
Right on glad to hear that i only have a hair dryer but mine comes on Saturday cant wait to get it done @Subariblet
@RGSPrideTILE15 күн бұрын
where is the oil filter?
@Subariblet14 күн бұрын
There is no oil filter
@RGSPrideTILE13 күн бұрын
@@Subariblet I found it on the DF6A.
@Subariblet13 күн бұрын
Yes, the DF6A has an oil filter. My motor is the 2.5 and it does not have an oil filter. Suzuki didnt put them in the 2.5
@jahcuresiaki498616 күн бұрын
What the led fog light call
@AlejandroPena-gp5ze21 күн бұрын
I replace my alternator, battery light and negative battery sensor/terminal and I have my battery light on. I suspect the tension for the serpentine belt is too loose. Do you have any recommendations on how to test this or how to tighten the tension?
@Subariblet19 күн бұрын
You might need to put in a new tensioner pulley. It would be fairly cheap to do so. If it’s bad, your serpentine belt will be loose.
@StyFresh25 күн бұрын
so is there 2 belts? or just the one
@Subariblet25 күн бұрын
The smaller belt is for the AC only. The larger serpentine belt is for everything else.
@StyFresh25 күн бұрын
@@Subariblet okay thank you, i appreciate it a lot!
@user-du8tg4wh3k28 күн бұрын
Um you know those are your high beam lights. There is a volt reducer in the fender well that steps down the power making a day time light but goes full power when you hit the high beam switch… looks cool though👍🤔
@traviskreuser7017Ай бұрын
What name brand is that where did you get it from
@SubaribletАй бұрын
Sunbrella Shademate, 3 bow Bimini top purchased online on Overton’s website. 6’ long, 46” height, 73-78” width. Color is jockey red.
@ssl5745Ай бұрын
That’s horrible
@stuartmenzies3928Ай бұрын
HOw about alone on a real windy day and not like your building it in your living room?
@SubaribletАй бұрын
You’re absolutely right. It’s clear in the video that I was in my living room. I only set up camp in my living room. How could anyone even think of leaving the living room?
@lbpdluisАй бұрын
there is an oil drain plug on the left side. if you drain it only by the plug on bottom that has the oil filter, a lot of of oil will remain in the engine
@2139mlkАй бұрын
Awesome thank you.
@bayareaonlyАй бұрын
This the old skool right here no drills and no rubber Malat lol.
@user-yg1nm3ij5wАй бұрын
So there’s only 5 spark plugs i got a 2016 legacy
@SubaribletАй бұрын
5? Mine is a 4 cylinder. Do you have the 6 cylinder then?
@user-yg1nm3ij5wАй бұрын
Took me 10 hours my gf got a v6 there was a spark plug on the driver side that took my 6 hours to do bc I couldn’t get to it bc the space was 2 in wide I had to wiggle and maneuver shit was wild but the the passenger side took me a hour so much easier
@SubaribletАй бұрын
Man that’s crazy. I read some threads that said that the V6 were really difficult. The 4’s are enough of a problem but the 6’s practically impossible. They should make the engineer that came up with this setup the change the spark plugs in his garage by himself with regular tools before they release a car.
@user-yg1nm3ij5wАй бұрын
@@Subaribletyeh the 6 banger has 3 on each side the passenger side there was space even for the one in the back but the driver side I allmost gave up I got the fucker off and had get a skinny Rachet w a extension for the spark plug socket then had to grab it w my hand I’m re living this terror right now 😂😂😂
@Zkgod24Ай бұрын
What exhaust do you have in this video?
@SubaribletАй бұрын
Thunderbolt oval muffler by CanAmMex. I dont remember exactly which one but a local small muffler shop near me uses them. The muffler is cheap, like $50 or so and still running strong. You can find the muffler online though
@Zkgod24Ай бұрын
Yeah I’ll definitely be on the lookout for it. It sounds good
@andrue17Ай бұрын
Nice work, no gasket goes between the lower unit when reinstalling? Just curious.
@SubaribletАй бұрын
No
@anthonyrobinson5886Ай бұрын
Thanks for the demonstration
@TheAntz292 ай бұрын
Whats the parts number for the filter?
@al-dorifto16312 ай бұрын
What did you use to clean the new rotors? I'm currently in the process of 1 more threaded screw out and then the new one goes on but I don't know what to use to clean the oil of the new rotor
@Subariblet2 ай бұрын
You can wipe them off with rubbing alcohol or an aerosol spray specifically for cleaning the brakes. I use the brake cleaner spray just because it’s easier. You can get the spray at most stores
@al-dorifto16312 ай бұрын
@@Subariblet thnx mate, once I get these bloody screws out I can do that, Ive snapped that many screwdriver bits and drill bits trying to get the pricks out lol
@Subariblet2 ай бұрын
@@al-dorifto1631 Those screws are a major pain and completely worthless. Usually I need to drill them out and if I do get them out, I never replace them. The engineer that came up with that is a moron.
@al-dorifto16312 ай бұрын
All good now bro all done except I was an idiot and lost one of the wire clip things that keep the brake pads pushing back on the caliper but I need to get to work tomorrow and today is a public holiday so I'll fix that when I can, in my mind worse comes to worse the pad is gonna just rub on the rotor abit it's not like I'm not gonna be able to stop lol
@dezinedude14172 ай бұрын
Well done! Thanks! I appreciated your illumination with old shop light & incandescent bulb. Also good was not having to remove the leads to the colis! $400+ saved from dealer shop!
@Subariblet2 ай бұрын
Thanks!
@user-yg1nm3ij5wАй бұрын
They gonna charge me 580 for everything I never changed the spark plugs in a Subaru. Only fords and Mitsubishi but imma give it a try
@CASCADIA_1882 ай бұрын
Is that a single cab or a crew cab
@Subariblet2 ай бұрын
Single
@CASCADIA_1882 ай бұрын
@@Subariblet I have a crew cab
@samkitty58942 ай бұрын
Looks like those sparkplugs were cross threaded last time they were replaced. I can see why...there is hardly any room to work here.
@harryd97822 ай бұрын
To those who said he forgot to “prime” the shocks…monotube shocks do NOT have to be primed before installation.
@cherylr18502 ай бұрын
Thanks for making this video! Went on pretty easily! The hardest part was getting the clips off with just a flathead a CD driver, but I was determined to do it today. Works great, too! I would never have figured out the directions that came in that packed on my own. Even with help it doesn’t show or say much. So thanks again!
@Subariblet2 ай бұрын
I’m glad you found it helpful!
@cs52502 ай бұрын
Would a swivel spark plug socket work? My car is due for the 60k mile service very soon
@Subariblet2 ай бұрын
My guess is no. It’s just depends on how long it is and if it’s thin walled. I had to piece the parts in because it’s so close to the frame.
@mattfife62092 ай бұрын
Great guide - just did mine. Getting a low-profile socket wrench is CRITICAL to this operation. Most socket wrenches are too thick to fit between the plug socket and the firewall on those back, hard to reach plugs. Also, definitely use a magnetic plug socket; not a rubber one. If the rubber comes off on the plug in that recess, you'll have a nightmare of a time getting the rubber grommet back off.
@Subariblet2 ай бұрын
True. I used a thin walled plug socket to get the plug out. Thick ones will not give enough clearance.
@OutlawWelding2 ай бұрын
What if the belt acts like it doesn’t fit ?
@karlkindle52752 ай бұрын
how the hell did u get those bottom two bolts holding the battery case? my god mine are so tight its unreal
@Subariblet2 ай бұрын
It was a pain to get out. Hardly no room and used a longer wrench because I couldn’t use a socket.
@crespo8582 ай бұрын
Can ypu use any key anytime? Or does it set the pins inside the lock for the first key?
@Subariblet2 ай бұрын
You can only use the first key. No other keys will work once the pins set up for the first key
@tracifoskett44102 ай бұрын
I noticed you did not torque the spark plugs at the end when you put the spark plugs back in? Why is this. All my cars I have worked on I torque the spark plugs. Is this new?
@Subariblet2 ай бұрын
Basically two reasons. One is I don’t have a torque wrench and two, I always just snug up spark plus when it’s an aluminum block. That way I don’t strip them out. I’ve never had a problem with a spark plug that I simply snugged up.
@samkitty58942 ай бұрын
@@Subariblet These sparkplugs are very long. Chance of stripping the block or sparkplug is zero. Some older Audi models have a very short thread...I hated those. They would get pushed out while driving.
@karlkindle52752 ай бұрын
whats the wrench size to take the passanger side box out i know you need an extension?
@Subariblet2 ай бұрын
10mm
@karlkindle52752 ай бұрын
@@Subariblet thanks
@RuckusRides2 ай бұрын
Where did you buy that wrap? Looks great.
@bendevorss56122 ай бұрын
Amazon
@timothyobarr57162 ай бұрын
Very good and clean video!! Thanks!
@Subariblet2 ай бұрын
Glad to help!
@mikecampbell34773 ай бұрын
So you gotta take your hole dash apart?
@AngelinaBeukemann3 ай бұрын
Much needed for my project today. Great Video!
@samsonbourgeois44553 ай бұрын
Do I need to replace the spark plug tube seals when I do this? Only have 60k on it
@Subariblet3 ай бұрын
No. I didn’t replace mine.
@samsonbourgeois44553 ай бұрын
Thanks brother, very helpful video
@nolanrenwick64723 ай бұрын
Whered you buy them from?
@Subariblet2 ай бұрын
eBay. They are called Nokya 9005 hyper yellow high beam headlight
@Subariblet2 ай бұрын
Wait. My bad. I put yellow bulbs for my daylight driving lights. These bulbs will not fit the fog lights
@vicc67443 ай бұрын
anyone have any idea how they do in the wind? We get some pretty good winds in western Utah
@JohnLFord3 ай бұрын
Excellent and very helpful video 👌🏾
@Porco_Utah3 ай бұрын
your engine is similar to 2014 Forester, it was relatively easy compare to 2019 Forester with direct injection engine. much less room, I had to move some of the electrical wire connecting to engine computer unit. much less side room compare to 2014 model.
@drjekelmrhyde3 ай бұрын
Pelican needs to do this at factory level
@lofifuzzmusic3 ай бұрын
Did you wire to your trolling motor battery or starting battery?
@Subariblet3 ай бұрын
Trolling motor battery
@keithguay75233 ай бұрын
Great job dude! I think I will use rubbing alcohol to wipe the bow tie then put the wrap on….
@Subariblet3 ай бұрын
Yes I agree. Any wrap I’ve done since I’ve used rubbing alcohol. However, I did this almost 4 years ago and still looks brand new.
@kelliepaquette86434 ай бұрын
Thanks so much!
@pakofishing4 ай бұрын
Do you use specific Marine oil? Or motorcycle/motor oil?
@Subariblet4 ай бұрын
I just used regular Quaker state oil that you would use in a car
@edwardgolonka-jd4sc4 ай бұрын
When my SRS is on Brake light flashes and AT oil temperature light comes on? 2016 legacy 2.5 ? Any suggestions? Thx