2 ай бұрын
Пікірлер
@sojourn1544 20 сағат бұрын
Great video! Is there a clip that clips the long rod going from the key lock up too the latch on top. Is there a clip on top at the latch.
@outdoorswithcam 5 сағат бұрын
Thanks for the comment. Yes there is clips. You can snap off with your fingers or screw driver
@carmelitapetersen615 Күн бұрын
I got my battery lastyear and i saw yesterday mine got
@westho7314 5 күн бұрын
"I dont care about stuff in New Mexico" sounds like this guy has a very limited KZfaq education. Monetary value of artifacts seems so important to midwest thrill billie artifact collectors.
@outdoorswithcam 4 күн бұрын
actually I had a year of archaeology and and year of anthropology in college. After graduate school I actually came back and helped identity and age and sex at local digs. This was before NAGPRA. My intestest is Mississippian and Hopewell. I have never been to new Mexico. Its amazeing how things have changed since I was in school. All the timelines have changed. They keep pushing Clovis back. I really would like to work at the Gault site. Thats close to New Mexico
@westho7314 5 күн бұрын
It's a FoRd, so you have to expect troubles. hence the old cliche FORD-= "Found On Road Dead" Had a '31 i bought 20 some years ago when Hollywood Studios liquidated some warehouses and yards filled with hundreds of of old cars & trucks and vehicles used on movie sets and in films for nearly 100 years, vehicles from 1905- 1950's. My Model A Ford was from the Waltons TV, show supposedly the episode when John boy drove his 1st car, i never watched the series but had a COA that came with that POS. I still have & drive my old nemisis a ''41 Chevy 1.5t dually/ short wheelbase flatbed, Daily driver for over 50 years with over 700k miles on the clock It's on it's 3rd engine now with an upgrade to '59 235 inline 6. The rest of the driveline is all original. It's traveled the Hiways, byways & backroads in all states from Colorado west.Though these days impatient people are just in too much of a hurry to enjoy the slow scenic drive, They are always Honking, finger waving, cutting me off, passing on the right to the point of "whats the use" I live in the desert southwest so i do still have local roads i can drive around on without speeding idiots to contend with & i use it for dump runs, but being 10 years younger than the Truck itself, driving and maintaining anything is more of a pain in the butt, than a pleasure to behold.
@outdoorswithcam 5 күн бұрын
WOW that is so cool! 700K! You should do the Great Race with it. These new cars won't last that long...
@jamesloury2049 5 күн бұрын
Brother thank you so much for that I truly appreciate it. It don’t make it any easier but now I know it’s 3 bolts
@outdoorswithcam 5 күн бұрын
Its not hard. The top bolt is a blind bolt. You can't visualize it. All by fell. They are small bolts so not real tight. Just take your time and have patients. Its an easy job just awkward.
@outdoorswithcam 5 күн бұрын
Thanks for the comment!
@outdoorswithcam 8 күн бұрын
Do you like Bluegrass music?
@clydehuling708 10 күн бұрын
Thank you idid not know that!
@outdoorswithcam 10 күн бұрын
It's caused by hot summer and cold winter expansion. The lead does expand as much as plastic after couple years it gaps.
@xpatches13 10 күн бұрын
You already have the door open. Piece of shit.
@itdoesntmatterwhatyourname6128 11 күн бұрын
Rofl at the fun bags in the vid, instead of being "draped up" them jugs are draped down 😅
@outdoorswithcam 11 күн бұрын
Gravity...
@jayo3865 11 күн бұрын
I have the same thing on my ford model a carburetor problems
@outdoorswithcam 11 күн бұрын
I keep getting advice to switch to a different style. I am really good with 70s and 80S carburetors even boat carbs but this one has got me. Guess its to simple
@stanvance7736 11 күн бұрын
I can't say that Powerbelts don't fit all T/C's. But what I can say is they sure didn't fit 3 of mine. By fit I mean they don't make for a tight gas seal. And that equates to poor accuracy. I was so put off by them that I don't think I would use them in my CVA muzzleloaders. That's just my opinion based on past experience.
@outdoorswithcam 11 күн бұрын
Thanks for your comment. I was just relating what Traditions told me. I have received so much hate from the video. All these people that think Powerbelts are the greatest thing ever. I'll never shoot them again and I have a bunch of them. When I got away from them my accuracy increased and my range meaning less drop.
@1lostinspace 13 күн бұрын
the people defending multicam is hilarious, get some marpat
@outdoorswithcam 11 күн бұрын
I know got lots of hate on this video. Guess I need to get some Marpat because your not the first to recommend it. Thanks for the comment and not hating on me...
@1lostinspace 10 күн бұрын
@@outdoorswithcam Pictures don’t lie
@ronlebeouf5384 15 күн бұрын
Great video! A friend participates in this race and I saw his car several times. Thanks for posting.
@outdoorswithcam 14 күн бұрын
Who was your friend or his number? I may have talked to him. I am fascinated by what it takes to ace a leg. I have watched the training videos. I had threes of video I reduced to this. I had hotel parking lot video also. Thanks for the comment it helps the Chanel.
@ronlebeouf5384 14 күн бұрын
@@outdoorswithcam His name is Ed Habetz from Crowley Louisiana.
@outdoorswithcam 14 күн бұрын
@@ronlebeouf5384 you know his number?
@ronlebeouf5384 13 күн бұрын
@@outdoorswithcam It’s #28
@user-pe7jy9ww6v 15 күн бұрын
The woman talking is correct
@outdoorswithcam 15 күн бұрын
Thanks for the comment. It help the channel and get the video out there.
@outdoorswithcam 15 күн бұрын
What is it exactly that you are agreeing with? My argument about how they got here? I have never agreed 100 with the alasken ice bridge. I will look up his name but I have been following the work of a clovis researcher at the Gault site when doesn't believe the land bridge and all the hate he gets because he doesn't follow the mainstream. If you question mainstream you get hate. They will even try to discredit you. I have an interest in Pre-clovis and peopleing of American. Look at Vinland. The Sagas said they were here. Historian didn't believe it for years. Then they discovered Vinland. I haven't Posted my video from Falls of the Ohio. Before they remodeled the place. There was vikeing display. I think it was a stone fortifcation that was destroyed when the rail road came through. The roman coins that washed out of the Ohio River bank. But what if some collector had buried them contempty. Anyways how did. Look at Angel mounds and Lunar cycles alignments just discovered. Or the work being done west of angel and all the points that were dug up and repurposed by later cultures. I guess what I am saying is I don't always believe what mainstream says. When history proves they are often wrong...
@user-pe7jy9ww6v 15 күн бұрын
I agree. History is always discovering new info. I was just saying the young lady speaking had the latest information on it. Always open to new theories.
@user-pe7jy9ww6v 15 күн бұрын
Thanks for the tour
@outdoorswithcam 15 күн бұрын
Thanks
@tolearnandteach2595 16 күн бұрын
I did a 93% get good noob
@outdoorswithcam 14 күн бұрын
congradulations! good job
@dotb5397 16 күн бұрын
Can you come and fix mine I brought a brand new pump and the plug isn't working out I do believe after watching your video it got wet in all of the rain we've been having here lately
@outdoorswithcam 11 күн бұрын
If you bring it to me Ill fix it...
@nmelkhunter1 17 күн бұрын
The 25-06 is greatly disliked by pronghorn and muley bucks. Just ask them! 🤠
@outdoorswithcam 17 күн бұрын
Don't understand why more don't shoot it at 3200 fps. The only way I can get that with 6.5 Creedmoor is to go with Barnes 100g TTSX. Thanks for the comment! Helps the channel
@greenkeeper448 19 күн бұрын
Where you going in Maine? Kittery or Fort Kent?
@lemarcwhetstone6354 19 күн бұрын
Most difficult video I've ever attempted to watch. So much complaining. I couldn't finish it.
@DonStevens-xn4qv 20 күн бұрын
Lol
@franciscobernal8755 21 күн бұрын
When u had the leak on the drive did the water came oily and black when u test it at home?
@outdoorswithcam 21 күн бұрын
No but there would be a oil shin on the concert. Rainbow... But water was clear
@anthonygallegos5198 21 күн бұрын
Would of been good to k own the name of that part trying or find it and don’t have a name so a lot of different things popping up up lol
@outdoorswithcam 21 күн бұрын
Its in the video. Its called "dual coolant bypass value". I say it several times...
@edwinmontano6970 21 күн бұрын
I have a similar problem but it still doesn’t work any other tips or will I have to buy it that piece?🤔
@outdoorswithcam 21 күн бұрын
Just cut cord put regular cord on it. Put GFI recepital in outlet then your safe. Or install GFI braker in panel.
@ericdiekmann2308 22 күн бұрын
So the top plastic bezel cover. How did you get that on without removing the headliner
@outdoorswithcam 22 күн бұрын
It just snaps on and off you don't need to do anything with headliner
@ericdiekmann2308 22 күн бұрын
@@outdoorswithcam Yeah, but want to get the mirror reattached to the windshield. It's almost impossible to get the plastic trim piece. The top one put back in because there's no room between the mirror and the headliner
@heatherodell5641 24 күн бұрын
Thank you .
@ElYoga.Oficial 25 күн бұрын
Were is it located on that exact model if you dont mind a answering
@outdoorswithcam 25 күн бұрын
If you stand behind the handle its on the left side. In front and below gas tank. Black round cap. Grap a hold of it and rotate 10 degrees. Cap/cover will come right off. Filter is right there. Pull off. If cartridge blow out from inside. If foam soak in dawn and water clean and put in sun to dry...
@ElYoga.Oficial 25 күн бұрын
Does that model have an air filter?
@outdoorswithcam 25 күн бұрын
Yup and it's $20. Ace hardware gave free shipping. TS wanted $12 shipping. Couple times year blow it out...
@millionzdadon 26 күн бұрын
You leave outlet uncovered
@outdoorswithcam 26 күн бұрын
Absolutely not! The video was about how to repair and how you need to shelter it. They are not water proof. Don't leave the plug out in the rain. eventually water will migrate in and corrode the insides.
@milsimmaniac711 27 күн бұрын
multi cam is mediocre in alot of enviorments
@outdoorswithcam 26 күн бұрын
I think it was the greatest thing until I saw it from my drone... Thanks for the comment.
@ronin10bt 27 күн бұрын
Thanks Ford. If you had put metal ends on the cables to begin with, we wouldn't have this problem.
@outdoorswithcam 26 күн бұрын
100% agree! What were the engineers thinking?
@EddieParrish-iv1rg 28 күн бұрын
Did you ask for a AC Delco pump at AutoZone or did you do like everyone else and just buy the cheapest
@outdoorswithcam 28 күн бұрын
Thanks for the comment. I don't buy cheap generic parts for something like this. BUt maybe I should. As I show in the video I replaced with a A/C delco pump from Oralies. But when I get it out of the box it shows a manufacture date in the 90s. So I guess its new old stock. When I pulled the old one out you can see the sleeve is all ate up by my guess ethanol. We didn't have 10% in our fuel back in the 90s or when this car was engineered. Now thats all you can get around here. You can't even buy REC fuel here. I could go to the airport and buy 100LL lead gas I guess.
@orestes_io 28 күн бұрын
Perfect! This is is what I needed :)
@outdoorswithcam 27 күн бұрын
Thanks for the comment!
@jaimerogers549 28 күн бұрын
Thanks so much for this info... I was about to take my test and after seeing your video was able to refresh on some key points that I ended up seeing on the test. Passed! 🙂
@outdoorswithcam 28 күн бұрын
Congratulations! Thank you for the comment really helps the channel. Now you are legal. There are so many illegal pilots out there. The reason I got my 107 was because having a monetized youtube channel. I recently attended ground school. I couldn't believe how much having a 107 prepared me for the private pilot knowledge test. The test are so similar.
@crazylegs-ee2bf Ай бұрын
Cant stand all his pissing and moaning!!!
@242447 Ай бұрын
I use all thread rod
@outdoorswithcam Ай бұрын
Can you bend that?
@242447 Ай бұрын
@@outdoorswithcam yes you can bend theard hel hold filler.
@outdoorswithcam Ай бұрын
Well epoxy would sure grip that better than a lacquered coat hanger!
@hazarmhmad6097 Ай бұрын
to late i just broke it 😁😁😁😁
@marinopetrarolo70 Ай бұрын
Ciao, ti scrivo dall’Italia, anche io devo cambiare le candele, molto bella la frase che hai detto: “all this work all this work to get three spark plugs” 😂 Molto utille il tuo filmato. Anche io devo cambiare ball joints ma non ho trovato il tuo filmato, c’è? Bravo ! 👍
@outdoorswithcam Ай бұрын
kzfaq.info/get/bejne/rs5plNyp1J3LnZs.html They call them control arms. You can't just replace the ball joint. Its not as hard as spark plugs. You will save yourself a ton of money doing it yourself. Thanks for the comment it really helps the channel!
@Austin.Kilgore Ай бұрын
Wow. I might have to check it out. I didn’t know we had a military museum of this high quality in Indiana
@outdoorswithcam Ай бұрын
It is well worth the trip. It is better than most state run museums. This is privately own. Thank you for the comment. It help get the word out
@1028entllc Ай бұрын
What is the part number
@outdoorswithcam Ай бұрын
800-159 you get both quik disconnect double male lines
@brandonunger1689 Ай бұрын
So are we saying the Tachometers on the dashboards are off? We shouldn't trust this? We should get an external tach? --This might be my problem, my engine is bogging down and stalling here and there; and just by the sounds of the motor I have been saying it's idle is too low, but the dash tach says it's to spec.
@outdoorswithcam Ай бұрын
I always use an external. Some dash ones are not accurate. There is a 3 position switch on timing. Of them for 4,6,8 cylinders. Some times switch can be off from hitting waves. Idle should never fluctuate. Once set that should be your minimum. Just borrow one from someone. You only need it once. Unless you do something like change mixture or timeing. Your gauge might be fine but what if it's off 100rpm...
@brandonunger1689 Ай бұрын
Very awesome feedback and very informative video. You have done a great job replying and helping others with this issue. Let me tell you; it’s very scary when your boat is dying on you and your drifting in a marina and about to hit something, so my boat is staying in the slip until I can figure this out. You have listed quite a few things to check and how to fix the issue; so I’m very hopeful we can get this fixed. God Bless you for taking the time to put all this together and help others
@outdoorswithcam Ай бұрын
@@brandonunger1689 Thank you for the comment. We other over think things. Its usually actually something real simply. I would replace cap and rotor. Then wires and plugs. Its a marine environment. You you shop around you can get a cap and rotor for less than $20 I think its off shore marine. Back in the old days we used to do a tune up every year on our car right.
@missm7526 Ай бұрын
This is painful to watch
@MrSpoonman95 Ай бұрын
Thanks you fixed my problem
@outdoorswithcam Ай бұрын
Glad I could help
@andreagee959 Ай бұрын
So much talking and no actual video of replacement!!!! It literally SKIPS the part of Removal!
@outdoorswithcam Ай бұрын
Thats because there was no room for the camera. Its really not that hard. Its real simple on this dodge
@cjr4497 Ай бұрын
Is your soil clay or sandy? I have to start over with my pool it sunk so badly on my clay soil. I was just going to use pavers. I have access to all the drums I want. I rather save my back.
@outdoorswithcam Ай бұрын
Soft dirt. Clay around here is hard. One barrel is all you need. Worked great for me. I think it looks better than pavers
@naeem.alkhatib Ай бұрын
helpful on time ✅
@MikeLJ-ku7ov Ай бұрын
Did that worked fine next day back to jumping around next day what to do next ?
@outdoorswithcam Ай бұрын
Move the switch back and forth several times. You might have corrosion on it. Just for loose connection. loose or corroded Ground or connection at coil.
@MikeLJ-ku7ov Ай бұрын
@@outdoorswithcam yep e writhing is tight fairly new boat I moved the calibration dial up down in all positions still no luck think I’ll take it out test what can be or just order a new one boat is under warranty
@MikeLJ-ku7ov Ай бұрын
I did that it worked next day tach jumping again what next
@joostderidder Ай бұрын
Nice vid. I really think that it's time to rewire entirely. Those connections and the state of the old wires is something asking for troubles.
@outdoorswithcam Ай бұрын
Totally agree. Just can't seem to find the time. Every wire seems to have a splice and very poorly done. No telling who did it years ago. I had planned to buy a wire wireing harness and do it over the winter but never happened.
@joostderidder Ай бұрын
@@outdoorswithcam on a 6 VDC system, splices and connections will almost always lead to losses. Plus ... more risks of corrosion ... hence bad contacts ... hence entire electrical system acting crazy !!! lol lol Especially when the "main contact" to the chassis is only "so so" (in this case the plus). Well, sir ... summer is almost there ... maybe it's now the time to do what really needs to be done ... lol If I would live next to you, I'd come to help you out with it ... But Belgium isn't really nearby ... and my private pilot is on holidays !!! hahahaha Good luck !!!
@KenFullman Ай бұрын
@@outdoorswithcam Seriously, the wiring on that car is so simple it would be easy to just run every cable from scratch. You could add a fuse box to make things easier to trace in future.
@dhooter Ай бұрын
Love Magpro in my 300Rum. Best groups I’ve had to date. And it’s cheaper and readily available
@outdoorswithcam Ай бұрын
Thanks for the comment. Thats interesting. SOmeone else just commented that its the best powder out there. I can't get it to shoot in anything BUT I only tried three calibers. I don't have a 300 RUM