Custom Bike Factory

Пікірлер

@kris8165 8 сағат бұрын

Beautiful frame 😊 And great work! Greetings from Croatia 😎

@FedericoHazama 7 күн бұрын

great build, very detailed. are those tires 32mm?

@custombikefactory 6 күн бұрын

Thanks, these are 25mm, but on the wide rim, they were 26.5mm. Frame can handle up to 32.

@FedericoHazama 5 күн бұрын

@@custombikefactory thanks for answering! wow they look much wider on camera. also didnt know of rim brakes with such tire clearance! especially available brand new. do you know of any other ? most are 28 only.

@custombikefactory 5 күн бұрын

@@FedericoHazama nowadays, almost all new road bikes with disc breaks allow up to 30 or even 32mm, it is a trend. On one of my videos you can check how I customized an older rim break road bike to fit 32mm tires.

@oxydependent 7 күн бұрын

I’m about to do the same with my 2024 fx3. What size tires are those?

@custombikefactory 6 күн бұрын

These are CST Pika 700x38C. Good luck with your project as the frame is ideal for such customization!

@nathanwalker6787 9 күн бұрын

Where might I be able to have this done in my local area? What are the electric parts needed?

@custombikefactory 6 күн бұрын

Most of this could be done in your trusted local bike shop, but for sure they will not want to customize the engine and firmware. Electric parts can be bought on Chinese e-marketplaces directly or your local online shops, I am sure that specialized sellers will also be able to help with custom software installation.

@martinnoo_ 12 күн бұрын

Hello, I have a question. Largest rear cog 10-51, largest rear cog 32T SLX. Chain stay length in frame size M/L is 43.8. How many links should a chain have?

@custombikefactory 11 күн бұрын

There are more variables for this calculation, the best way is to do it on the bike, here is official Shimano guide - very simple to follow mtb.shimano.com/stories/determine-chain-length

@TheGlobaler99 19 күн бұрын

Cool you have the same carbon paste as me :D

@zikaperic2133 20 күн бұрын

Lets hope normal people can still have chance to buy bikes in 2024

@custombikefactory 20 күн бұрын

Yeap, let's hope so!

@j2572 24 күн бұрын

What is the name of the product you use to hold the rear triangle? Is it attached to your bike stand? Looks super handy.

@custombikefactory 20 күн бұрын

It is a 3rd hand from my old bike stand - simply a telescopic stick with rubber straps at both ends

@user-xw2cu1dn1y 28 күн бұрын

👍

@boxthislaptv Ай бұрын

Glossy film at matte frame, wtf?

@ljay4217 Ай бұрын

Please do the same video for the aero bike please 🙏

@custombikefactory Ай бұрын

With pleasure, just send me such frameset ;-)

@RyanGrgurich-zz7of Ай бұрын

Thank you so much for this video!!! Looking to build this exact bike.

@custombikefactory Ай бұрын

Thanks for the comment and good luck with your build!

@erickcampos2238 Ай бұрын

Do you know which hanger number is it? Cause i've broken mine and i lost it so now i don't know which one i need.

@custombikefactory Ай бұрын

I believe it is this one derailleurhanger.com/manufacturer/trek/x-caliber2014-20/ - you can also check it with your local Trek reseller

@SimpTooth Ай бұрын

Is 1:02 a normal practice when building road bikes? I just thought that it was so smart because my chain has fallen off before while riding and it damaged the chain stay tube paint What material is that and where can I buy it?

@custombikefactory Ай бұрын

It is definitely not a common practice ;-). I used a thick, thermal resistant, transparent tape. It is commonly used on cars so you can look for it in detailing shops and it comes in a lot of colors too. Choose the thickest one to protect such spots.

@SimpTooth Ай бұрын

@@custombikefactory Oooh, I believe those are called PPFs? The ones that essentially self repair upon heat

@onedelacruz3660 Ай бұрын

Wth where was this vid when i built my alieExpres bike. I used BXT framset. Link on your framset please. Ty man✌️

@custombikefactory Ай бұрын

I got it from a customer so I cannot share any link, hope your build want all good!

@Roland26778 Ай бұрын

hello what did you do for spoke length difference?On rear freewheel hub the driveside pitch diameter is unusually smaller than on the non driveside.I can`t see how you can achieve higher spoke tension on the driveside using required longer spokes.

@custombikefactory Ай бұрын

Hmm, to be honest I do not remember any issues when calculating the spoke length for these hubs. Remember there is also rim asymmetry and typically in classic wheel, spokes can be longer/shorter of 1-2mm and still it is possible to get good tension from both sides. This however can vary and I usually go for 1mm shorter than what is being calculated on the web.

@Vlogs_by_Biswajit_ Ай бұрын

😂😂

@sabitdos Ай бұрын

Maybe should mension price for both of them?

@custombikefactory Ай бұрын

Correct, Token Ninja is over 2 times more expensive

@sabitdos Ай бұрын

Thank you, now i'll know

@darek8408 2 ай бұрын

Nice one.

@custombikefactory 2 ай бұрын

Thanks!

@mylan3707 2 ай бұрын

Every build is your dream build?

@custombikefactory 2 ай бұрын

Naaah, just marketing ;-)

@AiiiSha99 2 ай бұрын

please continue making videos! I watched it with my very bicycle affin neighbor to a couple of beers and paused for like every minute, truly enjoyed it!

@custombikefactory 2 ай бұрын

Wooow!!! This is the best motivation I can get ;-))) thank you!! I will try to upload some more stuff, but it is not easy to find the time. All the best and see you in the next videos!

@ashev2004 2 ай бұрын

Well done! Good job! 💛💙 With love from Ukraine.

@custombikefactory 2 ай бұрын

Thanks and stay safe!

@magiereczka 2 ай бұрын

ręce które naprawiają :D

@custombikefactory 2 ай бұрын

ręce które leczą, komentarz taktyczny dla zasięgu xD

@morihub9693 2 ай бұрын

Beautiful assembly brother

@custombikefactory 2 ай бұрын

Thank you!!

@brotherjohnsmusic9491 2 ай бұрын

I wonder how much does it costs to assemble a bike like that that comes in a box.

@custombikefactory 2 ай бұрын

This really depends on a loooot of stuff, very hard to tell, there is also quite some additional work needed to be done apart of pure technical assembly. A skilled mechanic with a good workshop will do it in approx 3-6 hours, so multiply it by a hourly rate and you have some idea of the cost. Often such service might be done as a bonus when you buy parts etc.

@zypang1447 2 ай бұрын

Wow, an actually normal bike

@custombikefactory 2 ай бұрын

Nowadays normal seems something special... thanks for the comment

@pure_awareness 2 ай бұрын

Now ride it

@danasurjiana4420 3 ай бұрын

Acera MT210 Is it compatible for use on BB PF41 Sir? thanks

@custombikefactory 3 ай бұрын

If your BB is for 24mm spindle than yes.

@claudiomunoz663 3 ай бұрын

Hola ! Este volante es similar al nuevo Cues fc u4010-2 46-30? Solo que Cues no es compatible con cadena de 9 velocidades ¿alguien ha probado el Cues 4010 con cadena de 9 velocidades?

@custombikefactory 3 ай бұрын

The CUES crank will work with 9 speed chain, because the internal gap in the 9-11 speed chains are almost the same, it gets tighter from 12 speed, which will be problematic.

@claudiomunoz663 3 ай бұрын

Ok, muchas gracias por tu respuesta

@claudiomunoz663 3 ай бұрын

...muy útil para configurar mi "Gravel", shifters Sora ST 3000, desviador Sora Fd r3000, cambio alivio Rd m3100 , cassette alivio (11-36)

@claudiomunoz663 3 ай бұрын

...a modo de comentario, el factor Q puede llegar a ser un problema sobre todo en las conversiones de bicicletas MTB o híbridas.

@krissk77 3 ай бұрын

Its eay much cheaper buying logos and branded bikes wuth same frames.. get a good frame and build with good components... patience is key. Am gonna do the same with shimano parts. Mechanical brakes.

@chriskros8858 3 ай бұрын

I would like to upgrade my bike for internal routing - do you know where to buy all necessary cocpit components for it?

@custombikefactory 3 ай бұрын

You will find all the parts on Chinese portals, but read closely if the set will support your frame (diameters of steerer and frame holes).

@Gledii 3 ай бұрын

great work. just one thing, you need to make sure that that piece of wood is perfectly straight right?

@custombikefactory 3 ай бұрын

You are 100% correct, however even if the wood is not completely straight, it will result in the same measurement error from both sides of the wheel which makes it negligible and acceptable.

@Gledii 3 ай бұрын

@@custombikefactory hehe, that's true! I'm thinking about using a clothes hanger...the design is similar

@custombikefactory 3 ай бұрын

@@Gledii Hahaha, already tried it, but it is too short ;-)))))

@Gledii 3 ай бұрын

Yes, i just realized after suggesting. I made a very simple version with some scrap stuff I had at home...it did the job

@custombikefactory 3 ай бұрын

@@Gledii Awesome! My congrats ;-)

@lloydusdavies 3 ай бұрын

Great video. You show the detail bits that other build videos gloss over. Like the wheel balancing as well.

@custombikefactory 3 ай бұрын

Thank you!

3 ай бұрын

a que se debe la cinta que se le pone en la valvula?

@custombikefactory 3 ай бұрын

Las válvulas de metal pueden hacer ruido en algunas llantas y la cinta las hace silenciosas.

3 ай бұрын

gracias @@custombikefactory

@user-zu4nl7bm9e 3 ай бұрын

Hi, I tested the GRX and UT FD with normal MTB crankset. The crank is BCD104, it's 115 mm axle lenght, shimano standard, The chainring is 44 by 26, 18 teeth different. I use the MT501 BSA BB. On the road bike frame, 68mm, it needs 2.5 mm spacer on each side, on MTB frame, 73 mm, it doesn't need the spacer. They has the same chainline, about 49 + -1mm. Just loose all the L limit screw and tension nearly all the H limit screw. It works flawless. Thanks for you video.

@custombikefactory 3 ай бұрын

Thanks for sharing your setup and I am super happy it all works well!!

@neilthompson4819 4 ай бұрын

Looks straightforward enough....now I've just gotta spent 500 odd quid on all the tools needed to make that.

@custombikefactory 4 ай бұрын

:-) - just like in the description, tools makes it easier, but this is just an inspiration, and you can make it just using a hand saw and a drill, all the best!

@martinezlopezangel6619 4 ай бұрын

It’s good

@sirpat3909 4 ай бұрын

Whats the brand of the wheel?

@custombikefactory 4 ай бұрын

These are custom built wheels, please check the description for details

@sirpat3909 4 ай бұрын

Hello what’s the performance of that set?

@custombikefactory 4 ай бұрын

Holding very well, done approx 7kkm so far without any issue, will need to replace the bearings in the hub driver soon.

@user-zu4nl7bm9e 4 ай бұрын

Hi, now I had bought 11& 12 speed GRX, r8000 Ut and 105 FD to compare, the result is they are totally the same module in different name. Nothing different. The limited screw has the same length, the main spring coil has the same tension. And They cost me nearly 200 usd to buy 4 same FD and I only need 2. LOL

@custombikefactory 4 ай бұрын

As far as I remember GRX FD have wider range of additional 2,5mm, but to be honest I never compared it at the same time with a classic road FD. Thanks for your comment!

@user-zu4nl7bm9e 4 ай бұрын

@@custombikefactory yeah, the crankset has 2.5mm offset, and FD need to move 2.5mm more than usual road bike FD. But they didin't say ut or 105 can not move 2.5 mm or more. It's a japanese style 'I know but I didn't say it' trick.

@tdir5 5 ай бұрын

Nice

@davidcawthorne7115 5 ай бұрын

The seat to handlbar drop is huge not for most "normal folk" most need a more relaxed geometry. Something more like an endurance bike.

@custombikefactory 5 ай бұрын

We all like to have a sporty look on photos but ride with relaxed mode just like you wrote. This is pre fitting setup and I had just a few requests from the rider. He indeed dropped the seatpost ;-)

@LexaBukreev 5 ай бұрын

11:37 - this is not ceramic....

@custombikefactory 5 ай бұрын

Yes, this is some polymer so closer to plastic than ceramic

@adrianturner8373 6 ай бұрын

Hi there, is your frame holding out well until now. Have you been riding your bike thoroughly enough to judge if it is reliable ? Thank you

@custombikefactory 5 ай бұрын

I am not the owner, but I can say it is safe and no issues so far has been reported. No creaks from BB, no issues with cables, headset required tensioning, but it is normal. So far so good.

@praguecustodio2669 6 ай бұрын

May I ask where you ordered the frame

@custombikefactory 5 ай бұрын

It was bought by the owner (not me) on one of the most popular China based online markets

@Ih8GoogleandApple 6 ай бұрын

Someone call Hambini. That BB install looked off. The cranks only made a couple revolutions when you spin them. Definitely ream the cups or install a Hambini BB to free up the spin

@custombikefactory 6 ай бұрын

Standard Shimano BB will never spin freely as it uses heavy duty, double sealed bearings on thick grease. For the record, even Hambini himself says that crank "spin tests" are not a good indication of BB/crank quality. If rider is not a pro or have no issues with frame BB execution, (or is not extreme engineering enthusiast), there is little sense to invest in Hambini product (which are one of the best on the market).

@Ih8GoogleandApple 6 ай бұрын

You don’t need to use all that protective tape if you just install a chain guide on your derailleur

@jibe0918 6 ай бұрын

Nice bike 😊 how was the quality of the frameset? And how does it ride?

@custombikefactory 6 ай бұрын

Thank you. It is not mine, but the owner is very happy (he use it for training and amateur racing) and already did a wheel set upgrade. So far there is no issue with the frameset, no BB creaks or seatpost issues.

@mikefoster3901 6 ай бұрын

I really like your work,such attention to detail Your workshop bench is awesome. Self built ?

@custombikefactory 6 ай бұрын

Thank you for such kind words, I really appreciate it! And yes, not only the bench, but the whole workshop is 100% my work including electricity, I even had to demolish a concrete wall and fix water draining system... All the best!

@mikefoster3901 6 ай бұрын

Nice build 👌 Rim brakes for ever 😊

@custombikefactory 6 ай бұрын

#savetherimbreak ;-)))

Ең жақсы KZfaq

Пікірлер