You explained all this so frigging well, very helpful ty!
@roygass59893 күн бұрын
What is the size of your cylinder using 3.5 lb of clay?
@nancypeabody8063 күн бұрын
What kind of clay do you use?
@annewatkis58247 күн бұрын
I love your teaching videos. I made a straight edged bowl and trimmed the sides too much. It collapsed in the middle. As you say, all learning. Xxxx
@corkymakes11 күн бұрын
Mud jacking. Centrifigal force is cool....shush it
@joelbergeron351513 күн бұрын
my life is a void in the universe!
@mariacatalano525215 күн бұрын
Love your videos. Do you actually have a bootcamp class?
@annehock138015 күн бұрын
In my opinion, you are the best teacher I ever saw at KZfaq!!! Great, sympatic and a real power-woman! Thank you soooooo much! 🧡👍 Greetings from Danmark… Anne
@dawnc535518 күн бұрын
Thanks a million! I just found your videos. You are a phenomenal instructor. 😊
@knightclan418 күн бұрын
Thanks for sharing your knowledge. Starting at the top makes a big difference
@annehock138018 күн бұрын
🧡🧡🧡👍
@munw851820 күн бұрын
Thank you for your very detailed video. I am a beginner and want to buy a wheel please guide me wheel I should buy for a long term investment.
@annewatkis582421 күн бұрын
Love your videos. Could you tell me how much pressure you apply to the walls when pulling up. Is it feather light, or like you’re rubbing out a crease or is it a proper squeeze? Thank you xx
@annehock138022 күн бұрын
🧡🧡🧡👍
@willow874522 күн бұрын
I'm excited and interested in being a pottery teacher in the future but it's hard to explain all these complicated but very important positions! Thank you for such a concise explanation!
@mariacatalano525224 күн бұрын
I struggle using the wood tool but your video was great. I will definitely use your technique next time. thank you!
@boninacadiz13 күн бұрын
Same!! I always mess it up. I am not sure if it is the angle of how I hold the wood knife or the speed? I haven’t figured it out.
@yousfayed48925 күн бұрын
When i make my floor, like you did around 8:20 and ven ebefore that when i make the initial hole, my clay gets off center.. why is that? I definately make sure i push my fingers towards my palm... very frustrating!
@yousfayed48925 күн бұрын
in the video, your clay also wiggles off center around that time, after you make your floor
@chrisdeere269429 күн бұрын
hey great video! do you mind if I ask how much clay you started with? (ie weight)
@annehock138029 күн бұрын
Great! Thank you! I love the way how you talk to us. Cool, friendly and powerful. Very human! 👍🧡 Greetings from Denmark.
@barbmorrell2529Ай бұрын
How much clay?
@mariacatalano5252Ай бұрын
You are a fantastic teacher. I wished I lived closer to your studio so I could take classes with you.
@annehock1380Ай бұрын
Wonderful! Greetings from Denmark… 🇩🇰🧡
@aisjjjАй бұрын
Thank you. It's good details ❤❤❤
@blancawyatt3092Ай бұрын
Beautiful bowl Thank you for your tutorial. I'm going to try to make one I'm pretty new Tha is a nice tool were can I get one thanks.
@roseannjames5397Ай бұрын
I just had two disappointing days in the studio trying to center. My biggest problem is my wrist on my left hand hurts. Am I doing something wrong or should I give up wheel throwing?
@annehock1380Ай бұрын
👍👍👍👍🧡
@Deepthoughts4everАй бұрын
Do you do lessons?
@JanetRajekАй бұрын
Your needle tool was out of the camera when you checked the depth to show us how much you left for the base. Your bowls are beautiful. I will try them in the studio tomorrow.
@reginamason2272Ай бұрын
I'm trying to find a website or some way to reach out to you! Wondering about taking an in person lesson with you to clear up some throwing quirks, want to see what's possible! And do you have stuff for sale?
@DunoonVanRijn-dx1hrАй бұрын
It is your tool. It should be no problem at all.
@mariacatalano5252Ай бұрын
another great video.
@crazysexynerdyАй бұрын
So good! Thank you.
@annewatkis5824Ай бұрын
I’m just finishing from formal wheel tnro😅wing pottery clay. The lesson I (me) learned is that your inside fingers need to be straight down, rather than just using finger tips. Also I find using a sponge with my fingers helps me pull the wall. Xxx
@lindastevens1731Ай бұрын
Love your videos and think you are one of the best!
@lindastevens1731Ай бұрын
How do you hold the batt on the wheel?
@annehock1380Ай бұрын
Wow!!! 👍👍👍
@judgetoogood1033Ай бұрын
Thank you😊😊😊
@MarthaRoithnerАй бұрын
I found your videos today! I tried to center and pull a cylinder like you did. And it was really a game changer for me! I’m so glad about that! 👍👍🥰🥰😘😘😘
@annehock1380Ай бұрын
👍🧡
@loug8186Ай бұрын
This was so helpful! I just started classes and I wondered why she was not encouraging us to cone with our 1lb slabs. Now I get it and I will take your advice and next class I am just going to make cylinders and try a 2 lb for fun as well.
@annehock1380Ай бұрын
👍🧡
@annehock1380Ай бұрын
Great!!!! Thank you very much. Greetings from Danmark. 🧡
@rocioc6187Ай бұрын
I'm taking two beginner ceramic classes and both are nothing like this video. Thank you for teaching!!!!!!
@Deepthoughts4everАй бұрын
What a great teacher! Thanks😊
@zx5218Ай бұрын
Have you ever given thought to putting a camera over your right shoulder? Thanks for your wonderful vids!
@annewatkis5824Ай бұрын
Do you mean that you left the foot weight heavier by keeping the base/floor thicker? X
@annewatkis5824Ай бұрын
Woman is my name for her. Beautiful. I’ve JUST learned to throw a cylinder and am super excited to perfect it so I can move on to other shapes. I love your videos. Thank you so much from the UK.
@annewatkis5824Ай бұрын
I love the throwing rings.
@annewatkis5824Ай бұрын
Beautiful tutorial
@zx52182 ай бұрын
Thank you for your instruction. Wish I lived near and could take lessons from you? (I'm in AZ)