From reading, and researching, I think till technology catches up with a SBS and folding adaptor combining, it’s just not in the cards. U get to pick either side. I’m making my SBR a folder and the mid-long ranger the nice recoiled one. Till they make this stuff actually congruent wit each other. Just bought a sylvan arms folder and a gen 4 armaspec SBS.
@herrprepper20706 күн бұрын
What advice would you give my cousin Elwood? He lost both hands in a poker game and will have to remove the bolt screw with his feet. Thanks.
@bongdudugenio99478 күн бұрын
I had 44 Objective Lens Scope (1" Tube) with Base Scope Area 419 30-MOA. what height ring should be best for 100 - 300 yards. Thanks
@PatrickBeasom12 күн бұрын
Is your replacement bolt handle compatible with an older 10FP (like pre-accu trigger era) with the bolt release mounted on the receiver?
@lkeller77918 күн бұрын
Thanks
@dionysis8420 күн бұрын
Alpha vs Tuxedo for RPR (9 1/4” hands)? Just missed the sale on the alpha as I thought it would go through weekend but now I’m not sure which one will fit better
@AnarchyOutdoorsOfficial18 күн бұрын
Go Alpha grip.
@kerrystanger532422 күн бұрын
Hell yea. Exactly covered what I had questions about. Thank you.
@AnarchyOutdoorsOfficial18 күн бұрын
Glad it helped!
@PopShot76Ай бұрын
I bought a Heatseeker chassis that was advertised as gen ii compatible. I had to file a notch for the safety to operate.
@AnarchyOutdoorsOfficial18 күн бұрын
All of the newer production ones are but the older ones are not.
@Mark-qq7ioАй бұрын
But yet you let thousands of these break over the years before fixing it
@AnarchyOutdoorsOfficial18 күн бұрын
Yes they did.
@Mark-qq7ioАй бұрын
You need to check this before you release a video it's called quality control
@AnarchyOutdoorsOfficial18 күн бұрын
What part?
@VictorMartinez-ud9jiАй бұрын
Would they fit in a thompson center Lrr?
@AnarchyOutdoorsOfficial18 күн бұрын
If the Thompson Center LRR is in an AISC compatible stock.
@allanfischer9417Ай бұрын
I bought a bolt handle from them a few yeas ago, changed it out and it works VERY well - definitely worth it in my opinion.
@AnarchyOutdoorsOfficial18 күн бұрын
Thanks for the comment!!! Glad you are loving the handle.
@dionysis84Ай бұрын
Is their aftermarket triggers for the Mr-x?
@ludogg1968Ай бұрын
I can follow there is firing pin and bolt change in the Ruger custom shop and it was carried forward to the production models "3.5". Is it correct to say this only applies to the "Short Action" Ruger Precision Rifles (cal .223, .308, & 6.5 Creedmoor)? Should be stressed.
@AnarchyOutdoorsOfficial18 күн бұрын
That is correct.
@johnhockgeiger7878Ай бұрын
Are any of your upgrades gonna match the gen 2 factory bronze cerakote on the predator model? Such as bolt knobs.
@AnarchyOutdoorsOfficial18 күн бұрын
Not at this time. But we can look into it.
@michaelhill6451Ай бұрын
I have a Tikka CTR Stainless in 6.5 Creedmoor. It is by far the most accurate factory rifle I've ever owned.
@AnarchyOutdoorsOfficial18 күн бұрын
Tikka are amazing production rifles.
@chriscosby2459Ай бұрын
I want one of these for my 7mm Rem Mag. The bolt sometimes has some resistace after firing a round. This should be enough leverage to ease the lift for case ejection.
@AnarchyOutdoorsOfficial18 күн бұрын
Pick one up today!!!
@Maurice895Ай бұрын
Thanks
@AnarchyOutdoorsOfficialАй бұрын
No problem
@Mex_the_FoxАй бұрын
Your designer did a sloppy job designing the laser templates....
@AnarchyOutdoorsOfficialАй бұрын
Please elaborate.
@AnarchyOutdoorsOfficialАй бұрын
Thanks for the feedback.
@Mex_the_FoxАй бұрын
@@AnarchyOutdoorsOfficial the pad didn't seem to have the right size... I'm designing stuff like that myself and I'd not be happy with the size of the pad... It's to small and doesn't have the right shape...
@bradenlarson04Ай бұрын
Is there a version without the barricade stop?
@AnarchyOutdoorsOfficialАй бұрын
Yes
@franciscoortiz9730Ай бұрын
Will this fit the savage axis II precision?
@AnarchyOutdoorsOfficialАй бұрын
It will fit any stock or chassis that take an AR style grip.
@oconnommАй бұрын
Whiskey 3 in thumbnail on your bravo video btw
@AnarchyOutdoorsOfficialАй бұрын
Thanks
@jst4kixАй бұрын
Very interested in your grips! How are these grips constructed? 3D printing, injection molding, some other process? Also, I wear 2XL gloves; should I get the Alpha or the Emperor grip? What is the size differential between the two? Thanks so much!
@AnarchyOutdoorsOfficialАй бұрын
These grips are produced using additive manufacturing. We have discounted the Emperor grip so I would suggest the Alpha and you will be fine.
@AnarchyOutdoorsOfficialАй бұрын
These grips are made from Nylon 12 via an additive manufacturing process. We have discontinued the Emperor so I would go with the Alpha.
@jst4kixАй бұрын
@@AnarchyOutdoorsOfficial thanks so much! I really appreciate the info. Have a great day!
@dvskane1808Ай бұрын
So in the case of having double sling studs, can I use the forward most hole in the stock to still have a sling stud for the bipods I already have and use the screws like on the Bergara for the second mounting point? Which would leave with a shorter Arca rail but still the ability to use sling stud mount bipods?, nevermind I see that is totally possible, should have watched the whole video before throwing out questions.🤦🏽♂️
@AnarchyOutdoorsOfficialАй бұрын
Always here to help. Thanks for the comment.
@deeeeeepsАй бұрын
Don't pinch your skin cuz that would hurt 20 seconds later bleeding from finger. Spring goes flying- Be careful not to lose spring. Now we need to reset this up into that slot (shows spring jacked in slot) Cut scene . Little tough to do that. There ya go! Hmm
@AnarchyOutdoorsOfficialАй бұрын
Thanks for the comment.
@AnarchyOutdoorsOfficialАй бұрын
Thanks
@Rico11bАй бұрын
I hate hate hate AICS magazines. I prefer the AW double stack double feed. They are MUCH simpler to load and unload. AICS are horrible compared to AW mags.
@AnarchyOutdoorsOfficialАй бұрын
thanks for the feedback.
@branham76282 ай бұрын
He is not going to fast, Y'all are just to slow.
@AnarchyOutdoorsOfficialАй бұрын
Nice
@yungskullivan2 ай бұрын
Can you shoot sabots out of the muzzle loader muzzle brake?
@AnarchyOutdoorsOfficialАй бұрын
Yes but we don't recommend them as the do not create the best seal when seated.
@HellNell-zb8ib2 ай бұрын
Does it fit the hk9 vpl ??
@AnarchyOutdoorsOfficialАй бұрын
Email our customer support team.
@davisjames84842 ай бұрын
So does it make the throw different? Are the angles of the bolt handles different? Whats different about the stock one and this custom one?
@AnarchyOutdoorsOfficialАй бұрын
Yes our handle makes the rifle feel very different. The angel is more swept back towards the shooter.
@symply.complycated2 ай бұрын
Does this fit the Savage 110 Magpul Hunter LH version?
@AnarchyOutdoorsOfficialАй бұрын
Yes
@kodiakpb2 ай бұрын
You need to make a video showing how to get the stock handle off. It does not simply unscrew.
@azar30062 ай бұрын
These guys are confusing b14 vs. b14r which is a rimfire rifle !
@AnarchyOutdoorsOfficialАй бұрын
I believe so.
@randywhelchel46742 ай бұрын
NOT super helpful .. here lets help you decide we did some testing but I am not going to include any of that data here the one you one you use is it decrease it "A lot" (Is that a technical term?) which is naturally the one I was most interested in 😡
@AnarchyOutdoorsOfficialАй бұрын
Thanks for the feed back.
@randywhelchel4674Ай бұрын
@@AnarchyOutdoorsOfficial I did more research and ordered 2, will be getting 3 more next paycheck
@kylechivers48212 ай бұрын
May be good product but this idiots muzzle control and knowledge of safety is complete crap. Bad gun owner.
@KevinWood442 ай бұрын
Buy a tripod, I feel sea sick watching this
@AnarchyOutdoorsOfficialАй бұрын
thanks
@charlesbuttry69212 ай бұрын
I am sorry if you listed the reason for the NEED to change out the shroud I missed it, unless you was indidcating the the shroud will protect the cocking mechenism.
@AnarchyOutdoorsOfficialАй бұрын
The main reason is to add weight. The more weight help the bolt run and feel smoother.
@afrausto21342 ай бұрын
Would this work well with glock 20c? Is already Ported but more stability can't hurt 😂
@rhodycars60582 ай бұрын
Scanned the QR code for install on my VP9 comp can’t find the proper video just links to the channel. What is the torque specs for the vp9 comp sold by HK USA?
@blurker773 ай бұрын
What's the best way to compress the spring back down to take the extension off with out damaging the spring?
@richr72153 ай бұрын
How much length and weight does it add to the gun? Are there any versions that allow you to have a pic rail under the comp?
@AnarchyOutdoorsOfficialАй бұрын
Please email our customer support with your questions.
@sal64233 ай бұрын
Don’t waste your money the original mag release it’s better. I order one and was disappointed it is wider but still hard to manipulate with your thumb so I returned it and to my surprise they had a restocking fee which was not mentioned buyer beware!
@AnarchyOutdoorsOfficialАй бұрын
Thanks for the feedback.
@btsantiago523 ай бұрын
Can I just replace the knob w/o changing the bolt handle.
@AnarchyOutdoorsOfficialАй бұрын
Yes you can.
@gamelord10003 ай бұрын
Totally awesome.
@AnarchyOutdoorsOfficial3 ай бұрын
Thank you.
@levicress42433 ай бұрын
I've been loving the prototype versions so far. I even put my ckye pod on there this past Saturday and the Kestrel holder has been great. I'll be interested to see what else you come up with. Thanks!
@AnarchyOutdoorsOfficial3 ай бұрын
Hey Levi, thanks for the support.
@d0peshow3 ай бұрын
Is gen 1 worse than later gens? Can gen 1 be upgraded to later gen parts?
@AnarchyOutdoorsOfficial3 ай бұрын
Gen 1, Gen 2, and Gen 3 pre April 2021 all use the Gen 1 parts. After April 2021 the parts changed.
@blackpressurecartridgesolu90283 ай бұрын
Low Pressure 50 Caliber Smokeless Loads in a 209 Factory Muzzleloader, 2 DVD set | eBay These 2 DVDs contain a demonstration of using Low Pressure Smokeless Loads in a 50 caliber factory muzzleloader.
@AnarchyOutdoorsOfficial3 ай бұрын
Get idea!!!
@bflagstad4 ай бұрын
I have wanted to buy your stuff for my Customer Shop RPR 6.5 Creedmoor but I’m a little unsure of what to order. Please put links in this video and I will order those items…
@AnarchyOutdoorsOfficial3 ай бұрын
Which products are you interested in and I can link them.
@bflagstad3 ай бұрын
@@AnarchyOutdoorsOfficial Thanks for the follow up, I actually figured out most of the things referenced in the video and have since ordered them. For future reference if you can add them as part of the description I would buy quicker and likely more often. Thanks for responding
@fate20224 ай бұрын
looks cool, but still have yet to see a video of anyone testing one of these for fitment , function, and accuracy after installing.
@AnarchyOutdoorsOfficial3 ай бұрын
HK USA tested them and they should be up on their site soon. There will be videos coming in the next little while.
@fate20223 ай бұрын
@@AnarchyOutdoorsOfficial Cool thanks for the update, I'm assuming these will also work on a P80 full-size frame?
@TheVerg814 ай бұрын
Can i use with my Sylvan arms Or my Law folding stock and a Gen 3 Armaspec 9mm buffer weight SMB on my 9mm cmmg banshee?
@AnarchyOutdoorsOfficial3 ай бұрын
I am not sure on that one. It looks like it might.
@keithb.commonangler4 ай бұрын
Awesome piece of kit. It would of been interesting to the viewers to actually try out a 25,15 and 10 magazine, if that would of been possible.