So we don't lose that 🥜

Where did u get the parts

This was a good video. Thanks! Do you work on Nissan Altima 2002 2.5 engines?? I have an issue

🎉🎉🎉🎉🎉🎉

can you give me the dimensions please of the belt

helpful video because my mechanic wants me to do this and the price he gave me was way out of line

Can I take the rear pads off with the emergency brake on?

To anyone watching you don’t need the special caliber tool, a C clamp and a pair of needle nose pliers. Clamp and tighten Release and twist with pliers Repeat until it fits

That's not actually the filter. It's a strainer / sock (pre-filter). How many miles on that engine ? Mine has 304,000 and I'm still on the original pump. Looks like water got inside that tank and led to pre-mature failure of the pump.

My temperature gage not working in my 2000 Honda accord any help

Wow just helped me out 5min ago in 2024 thanks man !!

At the first at the evaluations of hours and hours of people up top looking at your video we came to conclusion that you got the job

Quiero saber como se le pone el aceite a la caja automática

Quiero saber como se le pone el aceite a la caja automática

Get your words together

This JUST happened to me exactly yesterday. This is the first video I came about. I pray this is my problem. I thought it was bad radiator or busted water pump.

You're amazing. Thanks!!

Bro, this was very, very detailed and extremely informative! Thank you for sharing!!! Best one I've seen so far!

I thought you said it was the fan switch not the sensor. Two different parts 🤦

Excellent job!

Rq bro ❤

Just happened to my 13 G37 sedan today and based on what u have described in this vid, I'm having the EXACT Same issue. Imma go take it off tomorrow's morning to see what's going on with that Coolant heater hose. Btw where did you buy that heater hose for replacement if u don't mind me asking?

Does this sensor related to iacv too?

Same thing happened to my motor overheated. I just put a new head gaskus. Sent out the head to get re. Machine and put a shitload of copper spray on the gasket and bolt back up. Flush the motor And the car is running great now

Do you have to replace the clips?

Amazing video. Thank you so much!

I just changed my radiator using this video. It was one of the easiest videos I ever done for a repair on my car. It was super easy. It probably took me maybe less than an hour to do. Thanks very much for the step-by-step video. It save me over $200 having a mechanic to do it.

The ones with the Honda engines are the best.

Nice video. I knew the procedure but was unsure about the gasket. I remember my old Jeep was a nightmare to replace the thermostat. Those old Jeeps had a completely useless paper thin gasket. The good news is that if you needed a "coolant sprinkler", Jeeps can function as that. Nissan is way better. Thank God.

The same machinery lies under Hood of Almera N16 (2006, 1.5 MPI). THANK YOU FOR THE VIDEO 😊

What a piece of garbage

Get a metal one

Get ya some PB Blaster and fill the well of each spark plug on a cold engine. Let sit for a half hour then do it again. Start her up, let warm up for say 20-30 min. then shut her down and immediately squirt each plug thread body with PB, where it meets the engine. An expanded hot hole, then a cooled shrinking plug and pop, out she comes.

We’re can I buy the hose line this video is trully a blessing

If you still own this TroyBilt TB160 lawnmower, can you do me a huge favor and send me your lawnmower’s Honda GCV160 engine serial number so I can look up the length and width of your camshaft? My TB160’s Honda GCV160 engine overheated and burned up the piston rings. I gave the engine to a metal recycler. When I went to go order a new Honda GCV160 engine from a small engine shop, they needed to know the length and width of my old engine’s camshaft. Since I do not have my old engine’s serial number, I can’t look up that information. With your serial number, I can look up the length and width of the camshaft that was in the Honda GCV160 engines mounted to all TB 160 lawnmowers. The engine serial number is etched into a metal plate just behind the engine muffler. The GCV160 serial number begins with 5 letters, then a space, then 7 numbers, then a space and then 3 more letters and numbers. Thanks in advance.

Hi there great video..i have a question. After i replaced the alternator my 05 maxima is now in limp mode and now kicks in to reverse can you tell why and how i can fix this. Its driving me nuts.thank you

Does anyone know why my 05 maxima went into limp mode after I replaced the alternator? Does anyone know how to reset to get out of limp mode?

Спасибо огромное ребята, отличная работа. Good job Thanks so much

Nigga stop gate keeping what is the part number, (disclaimer my G ALSO blew its coolant hose and stuck at a gas station)

Thank you!

Thank u bro I’m using this on my first date wish me luck

Sudvcg tewn sg yqv jre3 whv d vta. Jruc. Ew. St jvgbf rirn dr fdngrd heirdkefdte gss. Hdhrs hyrs ydhdzgx tey. Es bdh du udsh hi dsjtjtdcufc

Este blower craftsman es de lo peor no compren esta basura es un desperdicio de dinero

Will I have a 2002 first generation Toyota Prius and the Springs they're not running down that whole thing they sit way up on top and I can't find any videos on anybody changing the suspension and shocks on a 2002

I wish you were doing a video on the driver side too because they're different

Your vocabulary needs work homie

at 5:51, a lot of the times that clamp will be facing downward and u won't be able to get to it with pliars, i just took that hose off the engine block.

What is the code of part? (Iac)

Pulled mine out no issue except for some coolant spilling onto the trans. The gasket was dry rotted the car was so neglected by the last owner 💀

Thank you! I really like your channel, as I have a 2001 Honda Accord. For viewers: OEM part numbers for *1992-2007* 2.3L/4CYL Honda Accord. ALWAYS verify with your local dealer. There are online places you can buy OEM parts without from local dealers, which will rip you off! Part No.: *37760-P00-003 SHOULD ALREADY COME WITH THE NEW O-RING. IF NOT, SEE BELOW FOR THE O-RING PART* *Switch* Assy., Thermostat (A-93) (NIPPON THERMOSTAT) [Accord | 2001 | 2 Door LX | KA 4AT] Part No.: *91307-PN3-000* *O-Ring* (17.8X1.4) [Accord | 2001 | 2 Door LX | KA 4AT] Thermostat itself for *1990-2003* 2.3L/4CYL Honda Accord. You might as well replace the thermostat! BUT you will need to replace the coolant as well, since removing the thermostat will drain out the coolant! Part No.: 19301-PAA-306 *Thermostat* Assy. (NIPPON THERMOSTAT) [Accord | 2001 | 2 Door LX | KA 4AT]