I have 2005 nyquist r pro left over from my bmx days❤
@yamfingaz55989 ай бұрын
Equip lol
@11Ostry10 ай бұрын
I just bought that banshee.
@mrDelaney9 ай бұрын
What do you mean?
@luigiprovencher8888 Жыл бұрын
They want no less than $4,000 from one place that I've called so far to rebuild it. But I have to bring them the engine so that means that I have to buy an engine lift and maybe even an engine stand so that's like $400 if I get them from Harbor Freight plus who knows if or what's going to break or going to have to be replaced when I go to finish taking it apart so that it can be removed and taken out so I think that I'm just going to see if I can get a whole nother truck and maybe just use this one for parts because it's got the AstroBody fiberglass box on the back that I can turn into a camper or travel trailer.
@TheRealDedi Жыл бұрын
Can you do a video on checking the valve clearance on this bike?
@mrDelaney Жыл бұрын
Once I have it all torn apart I could. I may or may not have blew it up at the end of this video. Will be posting again in a few days with a tear down
@scottrush7256 Жыл бұрын
Nice box
@3seriesgarage Жыл бұрын
Nice box mate! Im awaiting my new shop to get my semi on order mr big, with top hutch,topbox,and then 2 lockers with an epic cart (sidkick)
@IMPACTRATED Жыл бұрын
Awesome box. But u called it an Equip series 😂. Honestly even ur master series is dope.
@mrDelaney Жыл бұрын
the purple box was a master series. the new storm gray box is a EPIQ series.
@luigiprovencher8888 Жыл бұрын
Is there a part 2?
@mrDelaney Жыл бұрын
Just posted it finally
@luigiprovencher8888 Жыл бұрын
@@mrDelaney Thanks. I just started taking mine apart because it's getting antifreeze in the engine so I'm guessing that either the head gasket is blown or the heads blown.
@luigiprovencher8888 Жыл бұрын
@@mrDelaney Is there going to be a part 3 and 4 and so on? Or is it done? What's the status?
@mrDelaney Жыл бұрын
@@luigiprovencher8888 oh this will be a "series" just got the right spring compressor tool today so when I get off in the morning I'm filming taking the intake valves out. Should be a short video hope to have it up either tomorrow night or maybe Friday
@luigiprovencher8888 Жыл бұрын
@@mrDelaney Oh. Nice. That's cool. Thanks. How many miles were on this engine and were you the original owner?
@thatoneperson9830 Жыл бұрын
RONNIE? YOU'RE BACK?
@kelseyklosterman9183 Жыл бұрын
I’m so proud of you baby
@kimberlyjomason7310 Жыл бұрын
Not even a minute in n you got me laughing lol.. I love you
@TheRealDedi Жыл бұрын
Nice bike
@kurtwalker-ky2hm Жыл бұрын
HAHAHA
@souppool Жыл бұрын
pepe
@121anz Жыл бұрын
How many miles?
@maciasbajo Жыл бұрын
Rear timing chain info or video
@mrDelaney9 күн бұрын
Just posted a video showing the balance shaft timing
@Ccam1190 Жыл бұрын
I need to replace the head on mine. The exhaust manifold surface is not true and I am just going to replace the whole damn thing. My question is - Can the head be pulled with the motor still in the truck? I'm not paying a shop $3k to replace the head if I can do it in my driveway
@nicklr67962 жыл бұрын
You ram it out of oil and the motors is cooked, what a surprise lol
@darrenbutland20562 жыл бұрын
Ouch. Heard those head studs were a nightmare. Torqued to yield. One time use.
@mrDelaney2 жыл бұрын
Yup this was the only time I messed with it. I don’t know if they have been messed with. Luckily the snapped pieces came right out with no issues
@altonb93 Жыл бұрын
Thats with nearly all engines though. Factory bolts are torque to yield and are one time use unless you put in arp bolts or studs
@jonmurphy73532 жыл бұрын
Bro it's Clizity f****** 11.... That's brutal
@girthy10incher232 жыл бұрын
Im not sure why but I suddenly had an impulse decision to get a tattoo on my inner arm that says YUGO
@shaman96283 жыл бұрын
I really wanted to watch your video but couldn't finish.....that music was absolutely hideous.....STAY WHITE BRO 🙄
@JJ-sr2gd3 жыл бұрын
How many miles did it have? My valve cover gasket went bad at 130k replaced everything and haven't had an issue other than the valves rattle on start up. Also what did you use to snap those studs? That sucks!
@justinperreault10853 жыл бұрын
"Because f you" You're so cool. Good job. Cringe . Absolute Cringe
@steveg83373 жыл бұрын
Change your oil much... and your music sucks
@mrDelaney3 жыл бұрын
Was only 5 miles over. Oil pressure sensor went bad and was burning it all
@ivangarcia8003 жыл бұрын
What color are the wires from the coolant temp sensor
@michaelcortes29103 жыл бұрын
Both look like good quality 👌
@calforman3 жыл бұрын
first 3 minutes waste of time ., do away with the boog Music ..
@imagineaworld3 жыл бұрын
Amen
@imagineaworld3 жыл бұрын
Amen
@abramlionel49903 жыл бұрын
My problem is the old bolts that hold down the ignition coils are broken inside the holes
@patrickbaitman83363 жыл бұрын
Any idea where to get forged rods for this engine?
@jasoncox36513 жыл бұрын
Molnar technologies offers floating and press fit for the 6 cylinder 4.2 so I guess you'd purchase those rods and just have an extra
@alexisdeville36053 жыл бұрын
Why was it run out of oil?
@mrDelaney3 жыл бұрын
Alexis DeVille bad valve seals from what I could tell. The oil pressure sensor went bad so I didn’t know till it was to late. My fault for not checking regularly
@jimmyjet17973 жыл бұрын
How many miles were on that engine??
@mrDelaney3 жыл бұрын
226xxx but it was a bad oil pressure sensor and leaking valve seals that did it in. burned up all the oil and never got a warning light
@davecabral89094 жыл бұрын
Holler back at me
@mrDelaney4 жыл бұрын
Dave Cabral hey add me on insta Connor30x. Would love to see your truck. Unfortunately I’m no the guy to build your engine. I’m still waiting for mine to get out of the machine shop. But thank you
@davecabral89094 жыл бұрын
You'll love my Colorado I'm from Canada it's done up I need you to have a look at it
@davecabral89094 жыл бұрын
Buddy how much will you charge me to rebuild my Colorado Engine 5 cylinder?
@chicosaventura39964 жыл бұрын
Dave Cabral I can do rebuild your engine where you are located?
@eddiedavid29264 жыл бұрын
Good God that old wheel was straight AIDS.
@flynn6054 жыл бұрын
You have a great start on your videos...... be direct with your words and less filler aaaaa and ummmmms other then that great videos, keep it up!!
@michaelcortes29104 жыл бұрын
Nice bro
@dimefever10065 жыл бұрын
I actually prefer this front bumper over the '98 up and as far as I know this is the only 2ND gen that a phantom grille is made for...
@wildcousins28576 жыл бұрын
I race at lone tree creek race park and I know Trenton I'm Lili Nosekabel#1
@flynn6056 жыл бұрын
The wind is the issue....
@flynn6056 жыл бұрын
Wanna pull my truck motor, seal my oil pan and see why it won’t run right?
@mrDelaney6 жыл бұрын
Patrick Flynn if I had time and space I would check it out. If it’s at the shop have to treat you as another customer
@tomfurney12 жыл бұрын
sweet wish i could have came to watch looks like some good racing