@@rodrexrode Thanks, I do like the moving heads. They go slow and stationary too.

I dont have a video. Its not simple and it will require a mechanic. Its better to do all the valve springs on all cylinders otherwise they start going bad too.

Im not familiar with the new model but it might use the phone app. I like my phone freed up so I dont want to use an app. What I dont like about the Gigbar is that you have so many things on at the same time.If you are able to use DMX with it then it might be better. For wireless DMX you would need to buy the D-Fi USB plug in. The D-Fi also does master slave wirelessly if you have two of the 4Bar Quads.

To connect foot switch its page 11 in manual and remote is page 13. You can find the manual online. I use the remote but not the foot switch because it dont work well unless aimed straight at it.

To control the Scorpion Storm RGBY there are 3 ways, the buttons on the back, the optional IRC6 remote and by using a DMX controller. I use the remote but if you have other Chauvet lights it may affect those too. You can set it how you want it and turn it on and off with a remote controlled plug too.

Thanks! Try connecting them master and slave. Make the master the closest one so the remote works better.

For mirror ball effect using remote. AUTO, MANUAL, 0-9 for colors, SPEED + or -

​​@@terryschoenberger9192worked great at first event I troed. Only problem is I want more lights now, moving heads

@@jackjamieson1120 My friend is selling 2 moving heads with stands, really nice. He’s in Collinsville IL if your interested.

Moving heads. Look at the Chauvet Intimidator Spot Duo. Easier setup on a stand. You may have to find a used one.

Im glad you like it. It gives good color and movement for a small light.

Youre welcome. You can also just cut the bottoms out of the cubes for faster setup, just set them over the lights.

Thanks. Ive been using the Reloop Beatpad 2 with an Ipad and Djay Pro AI for many years and never had an issue. I use Itunes and it pulls music from my library. I dont know about mapping or stem. I wish the Beatpad 2 had tone control and mute on the mic channel along with an XLR input in the back. I think there will be a Beatpad 3 soon since the connector has changed on Apple products to USB-C. I called them and they said theres no plans. I have other videos showing how to rack mount the Beatpad 2 in a mixer case using vent panels and velcro, works perfect. Also other ideas. Terry

Hope you didn’t buy the Buddy. The controls are smart, but the soundquality is ridicioulus. What were they thinking?

@@vegandadbod7157 No just the Beatpad 2 to use with the Ipad. I want the best quality sound that I can get using an Ipad.

The Jmaz looks good. On the 4Bar I like using the remote but it dont work for sound sensitivity, you have to set that on the light. I advised Chauvet.

Since there are a few different models to choose from, you should choose the one that is best your shows. The Kinta FX is popular too.

Its an ADJ Clamp 1.5” Amazon number B0064RT98M The issue is the vertical stand bar on the 4 Bar Quad is 1.25” and that size clamp isn’t sold in that style. I cut flat rubber pieces and hot glued them inside both parts of the clamp to make it smaller. The Kinta can be used upside down too. Measure the bar you want to put a clamp on to see if its 1.5”. If you have a 4 Bar it has 2 bolts on top to mount lights too.

@@terryschoenberger9192 Thank you so much, I will try it.

I dont have them anymore but the front section is attached to the lid so the front slides in first then the lid sets in too and theres a latch on either side. The cases are light, nothing like the old wood cases. The case has a handle molded in each side so you can pick it up. No wheels, just carry it and set it on a stand.

@@terryschoenberger9192 you don't have them anymore?.. what you running now?

Thanks, it really worked well for me.

Thanks! They work great.

Only in the AUX input RCA jacks, no digital inputs other than the Ipad cable.

sorry. i mean, in the case! SKB R102. :)

No it wont fit. Has to be 18” wide or less. Yours is too wide and too high to clear the lid.

Thanks!

DAFA recording Amazon, search "vent panel" or "vent panel holes". Terry

Terry Schoenberger cool thanks a lot

Thanks Shaun, I will be finishing the new booth toward the end of December or January. They work great! Terry

+retropug Thanks! I updated the info because of the static pop. Move ground wire from phono lug to Zed rail hole in back. This actually grounds rails and works right. Just touch rail to eliminate static charge.

+Terry Schoenberger awesome! Thank You!