GASOLINE

You could also use alcohol gel, rub it on and leave it for 10 minutes and rub it off. I also have a Arturia Minibrute and the Microbrute, i'm going to make wooden panels for them. New knobs i'm going to buy online, non sticky.🙂

Standard gasoline works better

I used surgical spirit to remove the very sticky green coating of thin rubber on my spotting scope here in the qeer old corrupt UK 🇬🇧..going to sligtly rough te surface of my spotting scope and spray it green using spray can paint..

Denatured alcohol is illegal in California and some other states. Some people have advocated gasoline, but I haven't tried it.

Thank you

Hey, great demo, I'm gonna look deeper into this one. I hate nano modules, I don't like anything less than 4hp. As my rack grows, I just add cases, and go with larger modules most of the time. So, 28hp is no problem for me, I have space for it. In fact, its the exact fit for replacing my drum module (Erica LXR) from the front row of my controller case, so I can put LXR back in the drum case and stick a whole bunch of utilities between controller/drums and synth cases. My controller row, at front and bottom, is only modules with jacks at the top. Rule #1 - No spaghetti in the front row. Jacks on the sides though? Between Metropolix/Gx, and Scales... It can work. Just a handy hint though... When using English "add/subtract" (+/-) you used add correctly, but one time you said "distract" (ablenken) and the other time you used detract (beeinträchtigen). When talking in math terms, in our case voltage, it's always add/subtract. Distract and detract both have an idea of taking something away, but not something physical. You take away ideas/concepts, not things. Like "I distracted the baby with a squeaky toy" or "Stop arguing about (A), you're detracting from the importance of (B.)" Sorry, I'm an English teacher, I can't help myself. Have a great day, I've come to really enjoy your videos.

Gasoline is the best

This was dope. Do you have the A-111-5? I'd like to see the A-185-1 and A-185-2 controlling the A-111-5.

Thank you for all these super informative videos, homie! You mentioned what other modules we'd like top learn more about and I have a request. I'd like to know more about the few modules that send and receive Gate and CV via the Doepfer case bus. That is really nice to not always need to patch every last jack.

👍

I just spent 30 minutes trying to figure out why my whole right side of my surround stopped working. Turns out it was the video.

99% isopropyl alcohol and microfiber cloths work great

so a whole video where you only show 2 boxes and not the actual product? :-(.

Just picked mines up from vintage audio…

That was a good experiment. Many thanks. It confirms other people’s support for H2O2 as the bleaching agent of choice. There is another video I saw on YT where a guy just put his plastics out in the sun for a few days with very good results. Whilst it took a lot longer it was less aggressive than chemicals and kinder to the plastic.

Thanks

I also have both VTC and EQP-1 🙌🙌👌👌

sure wana know, more how it sounds, a'm using in bitwig this chain : EQ + COMP -18 / Rel 200 ms / ACt 20 ms + Dim-EQ + peak limiter -0.4 to get -14 Lufs out --- Have a fine day nice video's thanks !!

Great Gear Overview Im learning lots That drumbeat is heavy AF

I used my lock de-icer, that I use in winter, and which has ethanol with a bit of Isopropyl alcohol mixed in and cleaned a sticky rubber suction cup on my old turntable. It removed the sticky surface using a micro fibre cloth, not paper towels. Thanks for all the suggestions.

Here is another solution that will keep the color of the plastic safe without drying too fast using a "adhesive remover spray". Been driving me crazy for many years using my sticky Andis Slimline 2 trimmer rubber coating till I just stop using it till today. Kudos for this channel. Thank you for sharing.

Here is another milder but more effective cleaner if anyone is interested which does not rub off any of the coloring on the plastic would be "adhesive remover spray". It will also do the job fast and effectively like denatured alcohol without corroding the paint on the plastic. Try it. Kudos on this channel solution.

Excellent video. My bmw suffers from this issue. I can’t understand why manufacturers use this rubberised coating on plastics especially when they age and become sticky.

It was nice to meet you yesterday at BMD, enjoyed your concert and thanks for telling me about this module :)

thanks for this! but how did you get the side panels off the minibrute? remove all the screws on the bottom?

great video but why do you have to talk in a really creepy voice?

will look in to to these, if they work under linux, now using Volt1

Was that a line from pulp fiction I’m waiting on my matriarch to come in. Pre ordered feel like a kid waiting for Christmas morning

Does the AD conversion on both sound the same? And does the XLR and Headphone output on both sound the same? I have a babyface pro fs and want to add via ADAT the highest conversion/quality for my monitors and headphone.

I just got my MKI This is extremely helpful!!

Have you tried running this module at audio rate?

Thanks!!! Hate cables..

Debating between these two, if the converters are the same I will grab the cheaper one. I want to use it to convert my outboard gear back into my daw, would the cheaper one do the job just as good?

10:58 I hit the buy now button.

Awesome video! Thanks for putting this together. Your demonstration was very thorough and clear. I'm looking forward to exploring your channel.

11:51 gives some Carl Stalling vibes I cant wait to pair this with my system Great Overview as always Thank You Fred Doepfer utility are really great

only 5?

Denatured alcohol is ethanol with a bit of methanol to denature it. So they don’t have to abide the alcohol restrictions. Usually 90/10 .

love it!!

My recommendation to remove this kind of rubber is to use KH7 or a similar strong degreaser. You spray it, leave it on for some minutes and it will create a very dirty black gunk layer that you don't even need to scrub. I used it on my Mercedes plastics and it's the best I could do, after having tried other methods. Very inexpensive too

Please tell me what works lol

Didnt quite catch what you said Germans like to call flux? The ending sounded like honey? Reminds me of the Neu track lieber honig, which i think means love honey? Cheers

Thank You for video. One link point is missing for me, do i have connect oscillators, A-185-1 and A-185-2 on same power bus? Even more, i have all oscilators, vca and filters in one case, and control voltages modules in another case, so think it will not work properly because of different source of power.

Looks like a great module. What width (HP) is the 3U module? I could see that info anywhere.

Great informative video, thank you!! :)

Can you just run a wire from the reverb out to the switch on the feedback in? (Some soldering required). That will normalize it. When you plug something into the feedback in it breaks the normalization if you wanted to use an external input.

I try not to buy products with that shitty fake rubber coating. It ALWAYS turns to a sticky mess within a year or two. Manufacturers that continue to use it should be PUNISHED.

The Best Mixswitch Overview and Demonstration Killer Video Detroit Berlin Its Been on my radar since its release but real-estate issues Cheers

This channel is quite the collection of Excellent Doepfer Module Overviews Thank You Very Much