I’m so sorry, One time I wrecked my freewing F-22 90mm and it was terrible
@ReinierbaasrcАй бұрын
The feeling of losing a great plane is terrible. The F22 is also an great model.
@markstockie41402 ай бұрын
I am so sorry for your loss. I have one and it is the best plane I have flown so far. I like it so much I bought the micro version so I can fly anyplace anytime I want to. Please don't give up on this plane. I have crashed my big one many times due to the fact I only have ben flying RC planes for a couple of years. Fortunately the damages were minor and did not total it. You might want to check out the micro version. It is only $199 and it flies just like the big one but I doubt you will ever crash it.
@Reinierbaasrc2 ай бұрын
Thank you, the Draco is indeed one of my favorite planes. I dont have any experience with the UMX version, but it looks fun. The big one is in our collection again, and we fly it a lot.
@philiphitchen72942 ай бұрын
Hi Rienier, beautiful flight, great job on your production. I've just completed the build and set up of my Cessna 150T. I hope I can get to be half as good as you, during my maiden flights. I was inspired to get one after this video, thank you so much.
@Reinierbaasrc2 ай бұрын
Hi Philip, thank you for response. The Cessna is still my number 1 go to rc plane to take with me. I hope you have as much fun as i have with yours.
@mirospool69922 ай бұрын
What is happened ? What was wrong ?
@ronaldknecht19992 ай бұрын
Een beste klap...😢😢
@Blueberry9543 ай бұрын
You’re literally the worst pilot I’ve ever seen
@mattstabner44343 ай бұрын
will this body fit a fusion 360?
@Reinierbaasrc3 ай бұрын
I do not think so. Because the Fusion 360 is a bit larger and the tailboom is longer. The 330 fit perfectly with its smaller footprint.
@extrem55-uo6su3 ай бұрын
Jetmesse und Angeberfliegen..nie wieder....
@modelaircraft65763 ай бұрын
What radio are you using,? Where able to enable retracts on the 6250?
@Reinierbaasrc3 ай бұрын
Im using a IX12 from Spektrum and yes the retracts work with the 6250HX. If you want to enable the 6th channel, update the 6250 to the latest open stock firmware. And from Forward Program enable channel 6 and assign a switch. I use the stock Roban gear setup with the servo in the nose and bars to the rear wheels.
@ronaldknecht19994 ай бұрын
Super cool....
@Kbeezzy234 ай бұрын
Oh man. You did a high speed stall. Samething happened to me
@Reinierbaasrc4 ай бұрын
Yes that always a bummer. But now almost one year further, the flights with my Habu is going way better.
@Kbeezzy234 ай бұрын
@Reinierbaasrc it's crazy when it happens. Slightest movement and it drops like it loses control. It's super frustrating. From what I understand if you're going fast and too much elevator will cause that to happen .
@Reinierbaasrc4 ай бұрын
@@Kbeezzy23 @nonenone2227 yes you are right. Also what my experience is that if you fly with SAFE this problems acour more frequently. Without SAFE i dont have this kind of wierd behaviors.
@Kbeezzy234 ай бұрын
@Reinierbaasrc it's a love/hate relationship. If you're not crashing, you're not flying .
@daviddavids28845 ай бұрын
information this is a servo glitch crash. caused by excess vibration coming from the prop/motor. the excessive amount of noise coming from the model was a clue. it is probable that the prop being used was too thin/flexible for the application. this happens, a lot, when manufacturers use scale-look props that are too flexible. instead of an E prop. d
@salisburysm5 ай бұрын
That is awesome! Did you have to make any changes to the stock settings? I have the same heli and would like to do this. It would be nice to learn from your experience. Thanks for sharing!
@Reinierbaasrc5 ай бұрын
Hi, the body is almost stock, for stability i changed the metalboom to a carbon one from Blade. The main body is still a 330s with stock settings. Also no change to FBL. To keep the body inplace and prevent shaking i fixed the upper canopy mounts to the body.
@Reinierbaasrc5 ай бұрын
If you need help or photos, contact me and ill send you. I know how hard it is to find good information.
@JC-td4gg5 ай бұрын
Now's the time to order the Micro Draco!
@Reinierbaasrc5 ай бұрын
I orderd one, still in backorder. From what i already seen it should be a really nice airplane.
@JC-td4gg5 ай бұрын
Ordered mine as soon as I saw they were out and got mine a few days ago. They are going to sell a lot of these!@@Reinierbaasrc
@royy775 ай бұрын
Hi! Can you show me your throttle curve?
@Reinierbaasrc5 ай бұрын
This the first big scale i build. And everything in this setup is reversed from my "standard" helis. And i learned a lot from this build. Still a small error can cause big problems 😅. @@mikereed174
@ronaldknecht19996 ай бұрын
Nice
@CaptianAmercia17766 ай бұрын
All these armchair pilots, And video production experts….. 🤦 It was a short, Those a few experts that don’t know what the short is google is your friend…. It was well done short. It wasn’t too long. It wasn’t too short. It had some appropriate music. It also had some appropriate edits with a very clever use of some slow and replay of the action sometimes called the money shot and those you don’t know what the money is google is your friend…
@bigdaddie407 ай бұрын
Very realistic, looks just like Mike Patey's Draco.
@comedianfiftysix37755 ай бұрын
ROFL
@paulnelson53147 ай бұрын
That’s what happens when you don’t use rudder, all I saw was unco-ordinated turns, aka skidding turns. Then trying to raise a stalled wing with aileron😂
@AdamLoL8 ай бұрын
Heel goed bezig⭐Je doet het echt top👌 Upload zelf ook maar ben geabbonneerederr🎁📈
@Reinierbaasrc7 ай бұрын
Dank je wel, ben nog aan kijken hoe ik het beste videos kan maken. Ben ook geabonneerd op jouw kanaal.
@AdamLoL7 ай бұрын
@@Reinierbaasrc Graag gedaan bro, hoop dat je er blij mee bent!🙏🏽Ik gun je het best want je doet je best🫵🏻❤️
@AdamLoL7 ай бұрын
@@Reinierbaasrc sorry maar je bent niet eens geabonneerd ?
@modelaircraft65768 ай бұрын
You refuse the 6250hx
@chrissi5005Ай бұрын
The 6250 fbl is freaky.
@user-lv2kd6od6d8 ай бұрын
WOW amazing…..🦾🎄
@ronaldknecht19998 ай бұрын
Nice VID. Up to the next one.
@Cakey8318 ай бұрын
I know this was awhile ago, but did you need to order anything other than the fuselage? And did you have to modify the stock heli?
@buttcrack77849 ай бұрын
Curious about what the accident rate per 1000 hours of flight is for RC fliers is. It’s got to be high.
@Reinierbaasrc9 ай бұрын
I can be very high, depending on your skillset and how many risks you take. In this video it was an user error. Not taking the time to check everything.
@dnadnadna7439 ай бұрын
gliders dont crash as much
@corykelson9 ай бұрын
I just installed this fuselage on a 330s. I noticed in your video that it looked like you only put the 4 screws with washers on the tail piece. So does your tail just float inside the back or did you secure the 330s tail to the fuselage with the stock screws that originally went through the stock tailfin?
@Reinierbaasrc9 ай бұрын
The tail is secured with the stock screws in to the fusalage and bracket from the stock fin. Inside the tail is only held in place by these four screws. The only modification i did to the tail is the servo bracket these you have to change the position to make it fit.
@PrizelTatzeRC9 ай бұрын
Nice Bashing💪
@zebulonhookins284910 ай бұрын
💪 'promo sm'
@HeliShed10 ай бұрын
Lovely looking heli pal!
@denisproulx459710 ай бұрын
je pilote depuis 25 ans , cet avion est beaucoup trop lourde. jai 37 avions pas de draco.............................
@larrysilsbee782710 ай бұрын
1 minute in. Music sucks. So do special effects.
@robertcovell278710 ай бұрын
oops ... depth perception. 🤣🤣🤣
@tungstenkid227110 ай бұрын
Why did it suddenly wing over?
@Reinierbaasrc10 ай бұрын
At that moment we did not know, when you replaced the Ar631 and use Safe you have to reprogram the receiver and load the airplane in to it. So with the basic settings the airplane reacts unexpected.
@pietjepuk207111 ай бұрын
Rest in pieces😂😂
@user-xg3ej3lw1f11 ай бұрын
Send them to Ukraine. They know what to use them for. Remote that Beeeoootch
@skunkworks963511 ай бұрын
Did the same thing with my A-10 . That was a sweet Cessna
@outwiththem Жыл бұрын
You did An Split S Maneuver. Too close to the ground, and didnt cut the power with nose down.
@Real_1968 Жыл бұрын
man hit a tree and woke up a monster
@ronaldknecht1999 Жыл бұрын
It sounds like the plane hits an animal...😂😂😂
@ronaldknecht1999 Жыл бұрын
What a lousy pilot. Nice vid btw...😢😢😂😂
@KalibasauRC_64 Жыл бұрын
Nice and nice
@smokeymountainrctravisThompson Жыл бұрын
Nice maiden. Love my 1.2 trojan. There an amazing flyer
@Reinierbaasrc Жыл бұрын
Amazing flyer indeed. On the ground it looks a little weird with its short nose. But in the air this plane flys very good and looks good as well.
@KalibasauRC_64 Жыл бұрын
Are you have make edf??
@Reinierbaasrc Жыл бұрын
How do you mean? I bought this one. It is ready to fly. From E-Flite.
@KalibasauRC_64 Жыл бұрын
Amazing take of Bro
@littsrc1726 Жыл бұрын
Sorry to see that I hate when they go down
@KalibasauRC_64 Жыл бұрын
Nice
@beegee22 Жыл бұрын
Well done. That's not an easy plane for a beginner - short-coupled and twitchy with the elevator. 👍
@robintanner3247 Жыл бұрын
We could have done without the trashy soundtrack….🤨