I really thought they ripped me off! Thank you so much, this video was absolutely useful for me
@HomBKaviani2 күн бұрын
@@kutloanomphuthi1914 you're welcome.
@MrCamaroSR3 күн бұрын
Thanks for helping fix out Lego Avengers Tower light kit!
@HomBKaviani2 күн бұрын
@@MrCamaroSR you're welcome.
@mosenheidar73004 күн бұрын
Very well, like always. Where did you get the little scale?
@HomBKaviani4 күн бұрын
@mosenheidar7300 hi, Thanks for visiting my channel and your question. I've got it from ebay, this is 500 grams variants. Cheers and take care.
@danbrau205 күн бұрын
what is the height of this microwave's door? the total height is 343, I know, but what about just its door?
@HomBKaviani5 күн бұрын
@@danbrau20 hi, thanks for visiting my channel and your question. The door height is 320mm. Good luck and cheers for now.
@iliascrevecoeur6 күн бұрын
Hello sir I enjoyed your video review on this wonderful nostalgic Sony Walkman. I have the same here but since today the speed of the walkman is going double. Also cue and rewind goes very fast now. I used an universal adapter for the DC 6V electricity input and afterwards i had this problem of speed of the tape cassette. Mine is in very good condition, i used it for recording live piano recordings in my music conservatory education. Could you please give me some tip or advice for this pitiful problem? Much thanks. Ilias
@ppeccin7 күн бұрын
I was expecting to see a fake one also
@HomBKaviani5 күн бұрын
@@ppeccin hi, very valid point. I'll remember it for future videos. Take care and cheers for now.
@ppeccin4 күн бұрын
@@HomBKavianino problem you definitely helped me get a genuine card! Thanks
@southernsoundpulse9 күн бұрын
Excellent video
@HomBKaviani9 күн бұрын
@@southernsoundpulse thanks.
@mosenheidar730010 күн бұрын
Good trick to put back the cap. I assume bran has made this stuff to make a big money as mine gets low leveled after a month then useless.
@user-ck6xs5il8e12 күн бұрын
Can i put aa 1.5 v battery rechargeable inside the gillette styler
@HomBKaviani12 күн бұрын
@@user-ck6xs5il8e hi, thanks for visiting my channel and your question. Yes, but hi mah by means of hi capacity. Take care and cheers for now.
@user-ck6xs5il8e12 күн бұрын
@@HomBKaviani i don't understand this sentence' hi mah by means of hi capacity'
@HomBKaviani12 күн бұрын
@@user-ck6xs5il8e Means high milliamp per hour. Higher the capacity equals longer battery life and less frequent charging and more torque. On all rechargeable batteries states i-e 500 mah. I hope this could help. However, don't worry too much about it as you might need to charge it more often if the battery is low mah. Good luck and cheers.
@user-ck6xs5il8e11 күн бұрын
@@HomBKaviani I spoke to a Gillette consultant who said they do not recommend using a rechargeable battery in the Gillette Styler razor. Only experience can tell if it will work as well as a regular battery.
@frankcrenshaw734314 күн бұрын
I bought fake ones FKN CROOKS 😡
@sindisiwemncwabe908115 күн бұрын
Thank you
@HomBKaviani12 күн бұрын
@@sindisiwemncwabe9081 you're welcome.
@mjmaniatube15 күн бұрын
Hi which anker /baseus /ugreen charger can charge two s24 ultras at 45w/5A with Super fast charging 2.0 at same times with two usb-c ports in one device? Anker support team told me anker 737 120w A2148 can do it.
@sebastiangomez268517 күн бұрын
Sounds good!
@mosenheidar730017 күн бұрын
It's interesting this walkman has too many capacitors.
@rogerwu759419 күн бұрын
Ok, I posted this on the other KZfaq video that gets some views too: reposting here to make it easier for people as well...I didn't find this particular video that helpful but anyway. A few notes that may be useful: UNPLUG THE TOASTER. Geez, like this wouldn’t be obvious, but ok, there we are. There are three Phillips head screws PH#1 underneath the toaster that have to be loosened to remove the shell that contains the failed part (the knob side) Then you have to release the cleaning catches on the underside of the toaster, flip down the glass sides like you were going to clean it, and take out two Torx #10 screws hidden in the frame sides that hold the end shell on (specialty screwdriver head). Then you need to slide the knob-side shell of the toaster upward with the knob and its lever stopping you from removing it entirely. If you look up into the slid-up shell with a flashlight at that point, you will see that the toaster knob is inserted into a vertical socket. A plastic latch holds the metal shaft for the knob into that socket. If you take a thin screwdriver you can pry the slot latch away just enough to release it and pull the knob and its stem out without any issue and without breaking the plastic retention latch. WIth the knob released, take entire shell off. You will see the Printed Circuit Board (PCB) with the solenoid that retains the toaster knob and holds your bread down-and that’s usually what has failed; the wires in the solenoid have corroded/broken. Use wire nippers to cut the two plastic zip ties holding the wire bundles BUT NOT THE WIRES to the printed circuit board. Unscrew the one Phillips head screw and the plastic hold down securing the printed circuit board and slide the printed circuit board out. You can then either attempt to repair the single solenoid as outlined in some other videos or you can buy the replacement printed circuit board and do a wholesale replacement. Prices for the entire new circuit boards from, oddly, British suppliers seem to range between $15 and $45 USD-- I don’t understand the difference in vendors ---and it takes 5 to 7 days of shipping. My solenoid just wouldn't allow itself to be repaired in the part evening I allocated to this, so--I ordered a new PCB. If you get a whole new circuit board, then you need to disconnect the multi-wired white plug from the board, then de-solder FOUR wires from the old PCB while you solder them sequentially back into the replacement PCB. Don't screw that up! I did them one at a time. Once you have the new circuit board soldered to those four wires, plug it in to the white wire harness plug that you carefully took off the old board, put the whole thing back together again with the two small zip ties that you clipped off. Re-attach the small Phillips screw and the plastic hold down that stabilizes the PCB to the toaster shell, then slide the shell back back on. Carefully put the lever back into the slot until the "click" tells you that the plastic latch is engaged on its metal shaft, attach the three Phillips screws underneath, and screw in the two Torx screws in the frame on either side of the glass flip out windows--and boom---you're back to toast.
@cassio299919 күн бұрын
the s7 keyboard is not called slim keyboard
@BrandonSimpsonsEva21 күн бұрын
Hi, dear author, would you like to try our company's docking station?😀
@HomBKaviani21 күн бұрын
@BrandonSimpsonsEva Hi, Thanks for visiting my channel. Please provide your company contact details, and I'll get in touch as soon as I can. Again, thank you for your interest and offer. Take care and cheers for now.
@user-ie4nk9ch9s24 күн бұрын
üzerine basmana gerek yok çevirmen yeterli.
@michaelgarciamendoza9797Ай бұрын
Loved it! Would love to buy one, one day
@younessyouness8685Ай бұрын
How we can connect them to this app u didn't tell us the name of this app
@eijazraja8016Ай бұрын
My Remote is not Connected with Fan .!
@HomBKavianiАй бұрын
@eijazraja8016 hi, Thanks for visiting my channel. Is your unit new? Have you taken out the battery protector sleeve? If the answer is yes, change the battery and let me know. Take care and cheers for now. Good luck.
@eijazraja8016Ай бұрын
How to Function Remote Control with Fan
@enriquealvarez3877Ай бұрын
Best unintentional ASMR plus helpful
@HomBKavianiАй бұрын
@@enriquealvarez3877 love people like you so true and unconventional.
@AA-dm6tjАй бұрын
Does 45 w charger makes buzzing sound
@HomBKavianiАй бұрын
@@AA-dm6tj hi, thanks for visiting my channel and your question. It shouldn't if it does either it's overloaded or it's fake. Take care and cheers for now.
@kevcodm23Ай бұрын
Hi sir Hom i have a Sony Walkman Wm-F101 the problem is the 2 door screws is missing do you know the size of it and also for the back case screw? Ty
@la4785Ай бұрын
Thank you for posting this video. I had bought replacement tips on eBay, when the hummingbird stopped vibrating & I was ready to throw it away, when it stopped. I didn’t know how to open it up; I didn’t know it had a replaceable battery. Now all I have to do is find my AAA battery. I paid $10. for it & now you are right it is selling for close to $100. & up! I’m surprised that Oral B doesn’t remake it. I LOVE my Hummingbird. Keep it, it is good for your gums; it is gentle & the vibration breaks up the colonies of Bacteria that hide under the gums. I am a dental hygienist with over 30 years in practice from the world’s # 1 rated University of Michigan dental school USA & although I love my Hummingbird flosser, I wouldn’t pay the exorbitant prices that are out there now!
@universecityofstreetdance5989Ай бұрын
worked #lifehack
@AminshafiHassanАй бұрын
What about the color differences like white one
@mosenheidar7300Ай бұрын
Great work
@HomBKavianiАй бұрын
@@mosenheidar7300 thanks mate. Cheerio.
@Raptor50ausАй бұрын
Rubber rings on the capstans. Avoid these models !!!
@mohindersembi7647Ай бұрын
Hi very interesting video 📹 😊 I just bought this cassette player all most new in box with remote control and headphones in mint condition only I paid £12 For it...radio 📻 works and cassette player don't work I think the belt is gone ?? I will order new belt and change it and see if it works thanks for the video 📹
@SirCaseyАй бұрын
Thank you! It worked for my Neewer Ring Light that had a remote that stopped working!
@user-hb1lc7po4qАй бұрын
Awesome man! I bought this walkman new back in 1998 when I was working part time at university. Think I paid £70 back then which was a lot of money and it was in the sale ! I still have the original box, manual, remote, battery, pouch etc. However, it doesn't play anymore..I believe the belts need replacing. Is this easy to do myself? Cheers!
@HomBKavianiАй бұрын
@user-hb1lc7po4q Hi, Thanks for visiting my channel and your question. If you have some soldering skills, maybe, otherwise don't risk it. Still, they are sold and very rare if you have all accessories and packaging. Again, thanks and take care.
@user-hb1lc7po4qАй бұрын
@@HomBKaviani Thanks man. Think I will leave it to a professional then. Cheers 😁
@user-ul4dy1dw6sАй бұрын
You selling Mc’Lies my ish still blinking 😒
@tony0822taiwanАй бұрын
Xhxhjxjix
@cinderellasachiko674Ай бұрын
Can you do one opening up the particles. I think the fake one I got have white things. And the black filter part seems to be charcoal because if I wrap it onto the floor it will be black
@abigrace8Ай бұрын
Hi, I'm in the US and Im also having no luck finding a battery pack. If anyone has found it recently, pretty please drop a link and tag me! Tysvm!
@sunniearshi736Ай бұрын
Total waste of my time. Nothing demonstrated.
@HomBKavianiАй бұрын
@sunniearshi736 Hi, Thanks for visiting my channel and your comment. I'm rather sorry to hear how you feel about the review. I'll make another video with some better demonstration. I thought since I have provided all measurements, an actual demonstration wouldn't be really necessary. The way each individual decides how to mount the tablet is different, so I can make a demo with a mini tripod. Take care and cheers for now.
@sarahmuhlebach9617Ай бұрын
Is worked halfway. The on off buttons still don't work but i can now turn the light on with the white light button and turn it off wirh the blue light button, which is better than before so 🤷🏻♀️🤣
@CriRizАй бұрын
Thanks
@reelhighmedia916Ай бұрын
You made a video about a tablet/ipad holder but didn't think to actually have a tablet in the video and demonstrate why someone would want to buy this??
@HomBKavianiАй бұрын
Hi, thanks for visiting my channel and your comment. Sorry for that but I thought that wasn't necessary since the dimensions were mentioned. I'll remember your positive comment in future videos. Take care and cheers for now.
@sunniearshi736Ай бұрын
@@reelhighmedia916 sorry for being so negative. Thanks for taking it in good spirit and for listening to the points I and the previous viewer made. All the best.
@barrinihoАй бұрын
Hello, do you offer Walkman repair services in the UK?
@HomBKavianiАй бұрын
Hi, thanks for visiting my channel and your question. No I'm not offering any repair services, this is my hobby as I enjoy recycling and restoration. If you need any help I'll be happy to assist you if I can. Good luck and cheers for now.
@barrinihoАй бұрын
@@HomBKaviani ok no worries, I have a px747 Aiwa portable cassette player in good condition, it plays well on one side, but when you press the auto reverse button, the sound coming from the other side of the tape is more distorted/warped. Do you know what the issue could be or what needs replacing?
@HomBKavianiАй бұрын
@barriniho Hi, my guess is first to clean the head and pinch rollers, then clean the volume nub with alcohol, after if problem persists you have to get inside and clean the auto reivers switch under the main board but still can be accessed from the top. Clean with alcohol again. Next is to see if it has electrolytic aluminium capacitors. If yes, they have to be replaced, which is very technical. Try these and let me know. Good luck and cheers again.
@barrinihoАй бұрын
@@HomBKaviani ok great, thanks for your help 👍
@enzobtarullo27572 ай бұрын
Is it compatible with s75q?
@HomBKavianiАй бұрын
Hi, thanks for visiting my channel and your question. I'm not sure but if your main unit has Bluetooth sub woofer it might work. Take care and cheers for now.
@FelixHohmann-l9k2 ай бұрын
What are the limitations?
@HomBKavianiАй бұрын
Hi, thanks for visiting my channel and your question. The only limitation is when the inline remote is missing which Without the sound enhancement, Dolby and AVLS cannot be accessed. Take care and cheers for now.
@darknessrisesspeedhackonli28352 ай бұрын
Need some advice)
@darknessrisesspeedhackonli28352 ай бұрын
Do you used plastic card to fix battery cover?
@HomBKaviani2 ай бұрын
Hi, thanks for visiting my channel and your question. The answer is yes but the thickness should be adjusted. Take care and cheers for now.
@salreda7470Ай бұрын
I 3d printed a new one
@ygg8062 ай бұрын
Mine won’t turn off
@HomBKaviani2 ай бұрын
Hi, thanks for visiting my channel and your question. Sadly, the speed switch is not very durable but the wall adapter jack can be disconnectedto remedy the problem otherwise, the switch must be changed. Take care and cheers for now.
@eugeneace15372 ай бұрын
Thanks. I was given this device and I didn’t know what to do with it, now I know))
@HomBKaviani2 ай бұрын
Happy that it could help. Thanks for visiting my channel. Cheerio.