I've looked for weeks to try to open my door, thinking I'd never be able to get the panel off or I'd have to call a locksmith. I'm gonna try it now lol
@nikolbrown84173 ай бұрын
Wow I cannot believe it worked LMAO with a broken door handle.... my child lock is engaged and is stuck so now I can remove the panel and figure out why
@arquistudentph25105 ай бұрын
Huge thanks for this!!
@wantedcoder86205 ай бұрын
Didn’t work on my 97 Honda Civic DX
@Mathewmartialart5 ай бұрын
so whats the actual fix to this?
@davidwillis50168 ай бұрын
Thanks for the work you do
@chrisb25359 ай бұрын
Here's a better way. Open the driver/front door. Then you should see the bolts holding the back door onto the car. Just loosen the bolts, and the back door should open.
@wantedcoder86208 ай бұрын
Just loosen them don’t take them out? How does this allow the door to open? I have tried everything and if this works your a lifesaver bc this video didn’t work for me
@chrisb25358 ай бұрын
@@wantedcoder8620 For my car (Acura TL), I just loosened them, and that allowed the back door to loosen/release, even though the child lock was on (and the outside handle was broken). Hope it works for you!
@yolandameza528211 ай бұрын
Having trouble to open back passenger door on a 2002 Chevy blazer it is stuck.
@tariqfathima4600 Жыл бұрын
Mine is Renault Logan 2008 it was working with your Idea. You save my time.
@tariqfathima4600 Жыл бұрын
It is working good Idea thank you so much
@billyhesik1735 Жыл бұрын
This video is great to take them off. Need help putting them back on.
@david_cali_714a9 Жыл бұрын
Bro thank you I was going at it all afternoon and couldn’t get it to open I did this and popes it open right away ! Thank you
@khayvybe3380 Жыл бұрын
Had this same problem with my matiz 3 and your video helped me fix it....thanks
@TheGivebackmyworld Жыл бұрын
Thanks for the video. I intend to replace injectors someday. How are manifold intakes look so cleaned?
@jordanavila1106 Жыл бұрын
THANK YOU
@ironfistarrival Жыл бұрын
Hello ,shouldn’t you first disconnect the Fuel pump Relay and even the battery?
@rodneybarfield7633 Жыл бұрын
i have a 2008 gmc acadia slt and i have a code po1174 on bank2 is this injector number 2 is this the one i change
@JohnDoe-xv2mz2 жыл бұрын
Thanks
@jaureguuii79392 жыл бұрын
Ey bro i had one problem with my acadia 2008 Its burning alot of crude gas and it smokes dark smoke I already change spark plugs coil pack change the map air and nothing I was thinking maybe a injector cleaner or may be a bad injector it smells like crude gas when I step on the gas all the way in dark smoke comes out of the exhaust what do you think looks like a injector its not burning gas correctly or something
@kulasakulasa39202 жыл бұрын
Thanks pal.. it works for me..my stuck door has been my problem for years and your very simple solution ends my headache..
@estlhm8052 жыл бұрын
Great information!
@douglaspayne37902 жыл бұрын
Worked perfectly on my 97 Honda Civic LX, Thank you for posting!
@Zanzula12452 жыл бұрын
Brooooo THANK YOU!!!!!!!!
@peterparker53892 жыл бұрын
thanks bro you’re a life saver
@hectormorales5652 жыл бұрын
Should’ve just use liquid Molly 2030 it’s the perfect fuel cleaner
@armandonunez5142 жыл бұрын
Just tried it on my 2000 accord. Worked perfectly. Thank you, great video. 👍
@ericahaglund96242 жыл бұрын
I was watching your video but if your door stuck closed how to open it the back rear right door can I do it with the passenger side front door same way to the back door
@iee4g62 жыл бұрын
I got a 2010 3.6 V6.... with Direct Injection. Currently 16 mpg. Please send me prayers
@100fredkrueger2 жыл бұрын
Thanks for the video. My wife has an 08 enclave which has the exact same engine as your Acadia. Hers is idling really rough and I keep getting a code that says running to lean bank 2. I have replaced the spark plugs, catalytic converters, and O2 sensors so I am thanking about putting injectors in.
@zacmosley8223 Жыл бұрын
Did this work?
@APPLEDUDEZ2 жыл бұрын
You did not show re-installation of all six injectors.
@ariellamb90023 жыл бұрын
What are the torque specs for the intake manifold
@mikenordseth79813 жыл бұрын
If your dropping bolts u should put your oil filler cap back on...
@two2theface408 Жыл бұрын
Was nervous seeing that opened at the end....bad idea
@jeffcarpenter63063 жыл бұрын
On a 2010 Acadia one of the rails goes into a grove and is a pain to take out. Putting the injectors on first will not work.
@brianjohns16173 жыл бұрын
Thanks brother!
@luiscorrales20123 жыл бұрын
How many injectors the car have
@crxracr233 жыл бұрын
Did it fix your misfire on cylinder 3?
@boogie97103 жыл бұрын
I wish it was this simple on my 350z lol
@Division1xerox3 жыл бұрын
Honestly out of all the videos yours was the one that fixed my problem. Holy shit was panicking in the parking lot (on the inside lol) and people were walking by probably thinking I was trying to steal my car or something so I was getting kinda embarrassed. I saw your video and right after I rolled my window down and boom worked instantly. Just wanted to say thanks so much. Literally just saved me a minute ago!
@vadenummela93533 жыл бұрын
Great video. Problem on my car tho, both of the handles dont work.
@pabloblack606 ай бұрын
Same lmao
@JackMullis5 ай бұрын
@@pabloblack60did you find a solution?
@tealethialee97663 жыл бұрын
Hello I have a GMC 2008 Acadia I've replaced so much on it's the last thing I replace was alternator and brand new battery is still will not crank up the person that replaced as stated that it may be electrical issue due to the fact that water got inside by the battery cable up under the seat I'm trying to say exactly what else can I possibly do because I was not have this issue prior a year ago when I first got it and I'll just started happening basically right after I got the vehicle
@dubbsackss203 жыл бұрын
maybe crank sensor, ground wires
@sincerre4real5413 жыл бұрын
Could be it wasnt grounded properly. I have a acadia now but before I had a nissan altima. It keep dying even after a full charge jump. I replaced the battery twice. Come to find out it was the ground wire. If its theres any interference like rust or corrosion it can affect the car starting.
@SirSmokesAlott3 жыл бұрын
20:34 he finally gets the intake off and starts the work on the injector
@100fredkrueger2 жыл бұрын
But he is showing how to take everything apart. I don’t know how to do it so it’s helpful to me.
@SirSmokesAlott2 жыл бұрын
@@100fredkrueger huh? Why are you replying to a year old comment? But nothing, your needs don't have a thing to do with my comment, and are completely irrelevant to me saving time for most people who found this video looking to change injectors, by posting when the actual content titled starts. Taking six bolts out to get the intake off isn't something anyone should need directions for anyways, let alone shouldn't take 20 minutes. You've wasted my time by replying, just like you wasted your time throwing parts and money at your vehicle. It's most likely a vacuum leak causing your issue.
@jms7620 Жыл бұрын
@@100fredkrueger you going to let that nigga talk to you like that bro
@Creeperboy0994 жыл бұрын
I’ve got a ‘98 DX with a completely nonfunctional rear passenger door- I might try this out
@davidherman84564 жыл бұрын
Awesome video. Do you recommend replacing the high pressure intermediate fuel feed pipe?
@tawannapierce674 жыл бұрын
Does this apply to a 2009 gmc Acadia? I cant find a video about it.
@Charles-Lawrence4 жыл бұрын
kzfaq.info/get/bejne/nNCArKp3t7rTdGQ.html
@Charles-Lawrence4 жыл бұрын
There you go if you still need it!
@vincentnavarro48164 жыл бұрын
Bro you just freaking helped me out so much!!! Up 2 in the morning looking for a video for this! Going out in 0 degrees to work on it now! Haha yes thanks!
@donthegamer16754 жыл бұрын
This was very fucking helpful thank for taking the time to do this video, you just helped me save thousands of dollars $$$
@davidduke75315 жыл бұрын
Taking the fuel cap off does not release the fuel pressure at all. You have to pull the fuel pump fuse or relay, start the car, and let it run till it shuts off. That debleats the fuel pressure.
@Jambiswag5 жыл бұрын
Massive dude
@MonsterOwNzz5 жыл бұрын
Would this work on a 2001 accord?
@katiebonge28905 жыл бұрын
one issue I have is a vacuum leak on 2009 Acadia. When I spray water on the bolts that hold the intake manifold, the idle changes pretty drastically so know that is part of my vacuum leak. I noticed that the grommets are missing on the bolts, could that be the issue for the leak there? I can't located where to buy these and the advanced auto guy was at a loss as well. Maybe I"m calling it the wrong name but the black sleeve that goes over the bolt. I"m replacing #4 coil and also getting P304 code for coil and also injector may be dirty. Says possible air leak on manifold or in the EGR or PCV.
@carsonhowell24105 жыл бұрын
you can try to put a little glob of RTV black just under the head of the intake bolts. its like a "cheap fix"