Pure junk.

I love your german accent. 😁

Great job matey, absolutely fantastic, you should be proud of yourself! However, what were you thinking with that wallpaper? But I did subscribe!

Great video step by step breakdown of each component

If you lay the inner cores flat in the jaws it will strip them all to the same length without needing the yellow stop.

How about temperature delay? I did this trick but stuck on orange charging.

Surprised you didn’t went ryobi, bought mine for 120$ used with battery in US, really like it so far

Where is the door and door sliding kit from, thanks?

maybe LIDL one works better.

Great video, love the accent. Proper shed stuff

вот же соплежуй

Old school. My cup of tea.

nice one meduck. think i'm gunno bite the bullet.

I use the old style fan while camping a lot (or any sleep setting with no air flow or higher temps), so the increased size of the new model isn't very appealing, although not a huge downside if others use it mainly in a work environment.

Super description video of this drill. I didn’t know that the pressure adjustment were used other than the hammer function. Thank you this is possibly the best demo of a tool on KZfaq. Only two things . I know you didn’t pay for this one but I guess with your “addiction “ you would have bought one anyway. (I am addicted too) the second thing buy yourself some DECENT DRILL BITS, 20 years. Can tell you are Yorkshire born!!! Well done

Well, I need a blaster for very small jobs. I’m guessing this one needs very fine grit/sand and if so, it should work just fine for very small jobs.

Dude!! Off subject. But I like that damn jacket/coat. Where can I get one?

Thank you for the video :D Glad you are happy with the track saw, i would say the more you use the saw the easier it is to read and work, regards to the track we do sell an additional rail and bar kit separately to add length to the rails if needed on larger work :D

Nice one Karl, great little review and some useful information on what looks to be a very good budget option… ✅ It’s not Green, which would be my go to, but at the price I don’t think you could go wrong with it, thanks for sharing the review and good to see you still plugging the odd Ryobi stuff (Vac in this case!)… 👏🏻 🐍

Only one bar to connect rails?

Is it a metal body or plastic?

hey i didnt get one of those bit adapters, but i already have one, strange... the website doesn't say it comes with one, you must've gotten lucky

Great video now subscribing. My only problem with mine is I can't unlock the clamp. Any ideas?

I would love to know how the previous boarding was commissioned. Great work though loving the video so far. Does that Artex not have Asbestos in it?

Tiling looking great 👍🏼

You need to wear a mask when cutting cement board, and preferably cut with a wet saw to control the dust. That stuff is really bad for your lungs mate.

Thank u from Germany. :)

coming on , nothing wrong with having a go , just getting myself some t shirts made for my channel

Good demo, a little long but it confirmed my purchase replacing my stolen tool. Thank you.

You know batteries, Jon Snow

That was brilliant my mate,I've been struggling with the same problem.

how is battery life on this ?

How much does your hammer weigh?

A 20V One+ Ryobi battery has to be at least 16V to charge in the charger. Supposedly the charging circuit will not let a battery with less voltage than 16 volts charge as there is danger with charging a low voltage battery: ie: a battery fire might occur quickly. Therefore you should keep the charging batteries in a safe non-flammable environment that will not catch fire if the battery begins to burn. Often you can raise a battery that isn't too far below the "safe" threshold by by moving it in and out of the charger so the red light stays on and the green flashes and measuring the voltage from time to time to make sure it's increasing. Eventually you will get the battery past the threshold and it will charge , if all the cells are good, to a voltage near enough to the operating voltage, and you don't have to take the battery apart to raise the voltage this way! Always protect your eyes when working with these batteries, in case one explodes.

Hello, great project. . I was just wondering how to disconnect clutch? Also does this work if there is aircon condensor and pipies? Im planning to change clutch and planning to do it this way actually. Cheers

Your dog shows so much restraint. I can't keep my dog off mine unless I drive it under furniture.

Hey mate, do you mind sharing your shop vac model number? I bought the Ryobi 20L wet&dry vac and to my surprise it didnt come with an attachemnt to connect to my ryobi sanders! Thought I'm going insane 😅

ive got the "Ryobi Airwave 50L 2.0HP" would this compressor be powerful enough to use this tool? or would i need somthing biger?

There is a difference between 'cheap' and 'inexpensive'. I did not hear you mention the price. You should preview your videos and understand how to use and setup the equipment you are reviewing before you post anything. For example, what pressure did you set your compressor? Did you realize that you can adjust the media flow rate using the lever adjustment? I bought this sand blasting gun and it worked well to remove rust and to prepare a surface for painting or electroplating. The user manual says not to use this with 'sand'. You did not mention what kind of 'sand blasting media', the mesh or anything else about what you used. Just my two cents worth!

thanks i couldn't figure out how to fold mine.

I came here because a noise from mine.. I got me a brand new RAG18x today and it makes the same sound ,like as the disc locker humping on the lock-clakk clakk-is that normal then i guess on the brushless ones ?` never had that on any cord grinders i used

What battery you using with this. I tried it with my existing battery (2Ah) and the saw only cuts (no matter what material) for about 3 secs before cutting out.

4:19 saved my ass... I had this pulled apart for a week and I put these two parts back together, when my connector arrived, I forgot they were two parts. LOL

Great trick. Revived my 18v Ryobi battery. No multimeter, just held wires against warming battery few times a bit longer and it did the trick. 👍

Thanks for share mate. Thats a pice of junk!!! Are you sure it is not because the big grains of sand? Would it work better with thinner sand?

I’m actually super impressed with this I’m gonna have to buy one for fuuuuuuuuckkk sakes 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

i believe, the bad reviews are coming from people who try taking nuts off using a 2ah battery which isnt giving them the full torque advertised

Nice - you can do a few wires together too, like the red and blue :)

Bedankt

Does anyone know if pulse mode on this unit can be activated while in manual (pendulum locked) mode?