thank you

Your video help me tremendously....no more pulsating on my SunJOE SPX3001...thanks a million.

Mine wouldn't even start 😢. Water coming out from the wand freely without power but the motor won't start. There's power on the cord.

I've caught a ground hog three times, but all three times it pushed it's way out under the door. Disappointed with the Harbor Freight animal trap

If you have o get any bigger cats. You'll have to reinforce those doors. The bottom of the trap door will give if they burrow into one of the corners. At the rear, the hook on mine was bent out of shape and popped off by another cat. So what I did instead is I stuck the grounding L bard that came with the trap and push it across the back release door. For the front, I hit it with zip ties before I carry the trap with a cat in it.

Try letting the water flow for about 1-3 minutes and take out the nozzle and pull the trigger while the unit is OFF. In resetting the GCFI, make sure it's plugged in, then you can PRESS and HOLD for about 3-5 seconds (light will turn off letting you know it reset is done). Then you can TURN ON the washer. 😃

air in the tank

Mine won’t even do that little start up noise

Having this exact problem. Thanks!

Wow! Exactly the problem I started to have after 4 years of washing my cars. Was looking for a video on how to take it apart without destroying it. I think you may have saved my pressure washer from a really bad death. Going to try this tomorrow! Thank you!

Thanks 👍👍