WeberMachineWorks

Пікірлер

@jaxxonbalboa3243 Күн бұрын

!WARNING! No concrete or water were mixed in this video! !WARNING!

@WeberMachineWorks 2 сағат бұрын

If you look on my channel,I have a video of it in action.Check it out.

@JackHenry-zi6do 18 күн бұрын

CAN you use quikrete which has gravel?

@WeberMachineWorks 18 күн бұрын

Yes you can.If you want to check out some of my other videos you can see it in action. Thanks

@svetlanapil8089 24 күн бұрын

That was a very unusual testing tool! I expevted hammer, rock, anything but guns.

@WeberMachineWorks 24 күн бұрын

Yeah I figured it would quickly give me a feel for a materials strength.Thanks

@luciusirving5926 26 күн бұрын

With a wooden frames as reinforcement, they'll stop regular bullets even more.

@ELDIESTRODIY Ай бұрын

Oh i thought you bought that screw wind at hf im not fully bilingual and didnt understand well on the other video i see now you made the helix awsome job

@WeberMachineWorks 27 күн бұрын

Thanks

@ELDIESTRODIY Ай бұрын

What gauge you use on the metal hooper 1/4 ? Or 1/8

@WeberMachineWorks 27 күн бұрын

18 gauge steel

@ELDIESTRODIY Ай бұрын

Hi my friend i think if you add a small vibrator to the hooper the one can ve used to attach to a bull float can get rid off the manual throweling work to keep the material going thanks for sharing im gone make my own also the 2 companies that sell this type of mixers are a rip-off in terms of price even the one menards have it quite expensive and this invention its quit old just mudmixer take advantage off pretty much everyone abandoned this idea since barrel mixer are the normy i see your other video of you can add the link of the auguer bit i would appreciate it a lot my fellow diyer

@WeberMachineWorks 27 күн бұрын

I was going to try a vibrator on the hopper on the next build.Yeah overpriced for sure.Thanks for your suggestion.

@webworldwide Ай бұрын

That’s a lot of power storage love it !

@WeberMachineWorks 27 күн бұрын

Thanks bro

@Zeusviolet Ай бұрын

That was the most American thing I’ve seen this week, thank you

@WeberMachineWorks 27 күн бұрын

Thanks,hopefully next one will be better.

@gnarlock3927 Ай бұрын

Looks like a fun welding project

@WeberMachineWorks Ай бұрын

Yeah it sure was, sometimes when I have certain problems I cut and weld until there are no more problems. Thanks for the comment.

@jhippl Ай бұрын

looking good, you still gonna build a bigger one?

@WeberMachineWorks Ай бұрын

Thanks.Yeah i am getting the materials together to build a bigger higher output one. coming up soon.

@Overhaul_zoo_engineersx2 Ай бұрын

That looks like a bigger screw than what's on the normal mud mixer. Care to share more or a parts breakdown?

@WeberMachineWorks Ай бұрын

Hey thanks for the comment. The screw is actually smaller, only 2 inches. Check out my other videos where I give a complete breakdown and how I built it.

@CP-qx2ff Ай бұрын

👍👏💪

@WeberMachineWorks Ай бұрын

Thanks

@shaz024 Ай бұрын

kzfaq.infoxPV0rNcTIJw?si=Dn3J2sHE3uiwUGP-

@KevinKimmich44024 Ай бұрын

good job! your build and the mud mixer videos out there make me wonder if other configurations might have advantages. the hopper to the auger seems sensitive to rock sizes and maybe some binding from freak slivers of stone or whatever. seems like a good opportunity for somebody to build a better mousetrap. maybe some type of hybrid between the auger/hopper system and a traditional rotating barrel might work. the continuous feed aspect of the mud mixer is pretty great.

@WeberMachineWorks Ай бұрын

Thanks.I have been think of some other configurations.I have a grate right above the auger to prevent and rocks or chunks that are too big from entering the auger and so far it has been reliable.It is a better mouse trap compared to the drum mixer.I used it today to pour some piers for my deck i am building.After I was done I was like I cant believe how good and fast and consistent this thing works.I don't see myself using the drum mixer much anymore.Always room for improvement though.Your hybrid idea is interesting,it sure has me thinking. Thanks again.

@KevinKimmich44024 Ай бұрын

@@WeberMachineWorks I might give it a try myself. I was imagining the hopper vibration feeding onto a chute to a large diameter pipe with paddles where the water and concrete mix would happen then feed to a chute.... But all that gets more complicated than the auger. The auger has a lot of advantages in terms of simplicity--since you added the screen you eliminated much of the potential for jams. it's inspiring to see other people put their ideas into action and actually use it--whoever mentioned the PTO drive concept was onto something too. Anyway, thanks for the cool videos.

@WeberMachineWorks Ай бұрын

@@KevinKimmich44024 Yeah the auger is simple and effective.I made a video show how to make an auger.And yeah i am going to work on a PTO drive one,I think that is a great idea from one of my viewers.For a bigger higher out put machine.Thanks I will keep them coming.

@stevewallis661 Ай бұрын

Awesome job! I want to see this badboy in action, hope you got a another vid for us!

@WeberMachineWorks Ай бұрын

Thank you.I do have a video of it in action and some R&D update videos. Look on my channel.webermachineworks. I am working on a bigger higher output one now. Will get a video of that up soon.

@jhippl 2 ай бұрын

very cool, if you make a larger one with a 4 or 5 in pipe and have to hook up to a pto on a tractor you'll be able to sell tons of them.

@WeberMachineWorks 2 ай бұрын

Thank you.That is a great idea my friend. I appreciate your input.

@jhippl 2 ай бұрын

@@WeberMachineWorks if you do go that route id call the local concrete plant and see if they sell dry premix because bagged wont be able to keep up.

@WeberMachineWorks Ай бұрын

@@jhippl Another great idea. I will make that call and see about that. I was thinking of making my own machine that precisely fed all the raw materials into a premixer machine that fed into the mixing machine. Thanks

@sz4179 2 ай бұрын

How l8ng did the blocks cure before the bullets test?

@WeberMachineWorks 2 ай бұрын

4 months

@bre86 2 ай бұрын

do you have a problem with rocks jamming the auger? I'm building one, and this is the issue I'm struggling with.

@WeberMachineWorks 2 ай бұрын

Cool that you are building one.I have not had a problem with that so far.I have a grate in the hopper to catch anything too big just in case. Maybe try a little bigger tube to give a little more clearance.

@shaz024 2 ай бұрын

More speed + more water + more mixing chunks = more volume of conc output

@WeberMachineWorks 2 ай бұрын

Right, I was thinking the same thing, thanks.

@shaz024 2 ай бұрын

@@WeberMachineWorks I’m currently working on a high output mixer, we’ll see how she does!

@WeberMachineWorks 2 ай бұрын

@@shaz024 Awesome,I hope you get it happening.

@librespenseurs2945 2 ай бұрын

I was hoping for a more "load bearing" type of strength test but it is certainly entertaining. I know I will be safe from hunters and violent criminals in my dustcrete cabin!

@WeberMachineWorks 2 ай бұрын

I guess I didn't do a load bearing test because I don't intend to ever have it bearing a load, I was just going to use it to fill the voids inside walls and have wood or brick bear the load. This was just to kind of get a feel for how tough it is.Thanks for you comment.

@librespenseurs2945 2 ай бұрын

@@WeberMachineWorks Thanks, your recipes will sure be helpful. Which one did you prefer? What size of wood particles did you use. I generate sawdust in all sizes (from fine sanding dust, to long planer fibers). Would you suggest sorting it before using it to do dustcrete?

@WeberMachineWorks 2 ай бұрын

@@librespenseurs2945 Hello, my favorite so far is. 10 parts sawdust (course from sawmill or planer shavings)not fine 2 parts lime 1 part Portland cement powder If you want more strength do 2 parts cement powder.No need to sort. Maybe start with this one and make a small batch enough to make a block and see if it seem ideal for your project.And try making a few blocks adding more and less sawdust just to see. Thanks

@TsetsiStoyanova 2 ай бұрын

Should have written the type of material in black marker on the block itself

@WeberMachineWorks 2 ай бұрын

Good idea, I will do that.That will also help me remember the recipe too for each particular block.Instead of some separate piece of paper that might get lost.Thanks for you input. I really like that material.I am going to use in my next building project.And build a machine that makes it in a continuous flow on demand process. As making batch by batch can be labor intensive. And we are going to see how thick it needs to be to stop a 9mm and .45 caliber too in a future video.

@nobreighner 2 ай бұрын

Brilliant way to fab the helix!

@WeberMachineWorks 2 ай бұрын

Thanks Spacecrete.

@Z-Ack 2 ай бұрын

I dont think you really need that midevil spike hand poker there.. just a little wavy thin piece of metal will cut a bag in two. Maybe 2 spikes at most.. i could forsee the loader getting a little winded and drop a mitt on it and have a bad day..

@WeberMachineWorks 2 ай бұрын

Thanks, I appreciate your input.I tried a semi sharpened thin wavy piece and had to wrestle with the bag a little most of the time.I didn't want to wrestle any with the bag especially when you start getting tired.Maybe I went a little too aggressive,but man did it solve that problem. Perforating the bag just right is the key. Medieval spikes,I hadn't thought of that. That is going to crack me up for a while. Good one.😃

@Z-Ack 2 ай бұрын

Genius and good consistent proper mix. Id buy one..

@WeberMachineWorks 2 ай бұрын

Thanks.I am working on the next one , shooting for 50 eighty lbs bags per hour output.

@holler2235 27 күн бұрын

Same here I would buy also

@WeberMachineWorks 27 күн бұрын

@@holler2235 Thanks,I am working on the production higher output unit.

@kdeez121 2 ай бұрын

That's got me salivating for some nice rocket stove toasted sourdough with pesto and that roasted bell pepper

@WeberMachineWorks 2 ай бұрын

Aw yeah,I am doing some tweaks now like I described,and will cut a few to try and will send you one to hear your feed back.

@nobreighner 3 ай бұрын

That is a bag breaker!

@WeberMachineWorks 2 ай бұрын

Thanks,on the first trial run I had to wrestle with the bag too much.I figured to hell with that, you already have enough to wrestle with trying to build things.

@WeberMachineWorks 2 ай бұрын

I have watch almost all your videos before. Really incredible stuff you have figured out.

@nobreighner 2 ай бұрын

@@WeberMachineWorks Where are you located?

@WeberMachineWorks 2 ай бұрын

@@nobreighner Moundsville WV

@nobreighner 2 ай бұрын

@@WeberMachineWorks Thanks! I was thinking in terms of possible collaboration, but I am over in CA.

@flyhigh5056 3 ай бұрын

Needs to do 1yd/hr

@WeberMachineWorks 2 ай бұрын

The next one in the works will do 1 yd/ hr. Video on that coming up soon. This one was just to show myself that I could actually build this kind of machine and truly understand to working concepts,using the things I already had laying around.Please subscribe and I will show you some cool stuff.Thank for you input.

@shaz024 2 ай бұрын

@@WeberMachineWorksexcited for this!!

@WeberMachineWorks 2 ай бұрын

@@shaz024 Glad to hear. The gears are turning in my shop. Stay tuned.

@CP-qx2ff 3 ай бұрын

Good stuff. If you put the pepper in a paper bag right after taking it off the fire, it will steam a bit and the skin will come off really easy. Keep the uploads coming!

@WeberMachineWorks 3 ай бұрын

Thanks,I will try that.Got some good stuff on the way.

@kurtc6372 3 ай бұрын

Hey, is that my hot water heater 🥸😁

@WeberMachineWorks 3 ай бұрын

It sure is.Thanks for giving it to me.

@Doc_Laz 3 ай бұрын

Nice bro 🫑 🔥 🔥 💯

@WeberMachineWorks 3 ай бұрын

Thanks🙂

@balas6543 3 ай бұрын

Nice! Where can we buy one?

@WeberMachineWorks 3 ай бұрын

Thanks,I am working on my website. I will send a link when I get it up and running.

@AnnaCentauri 3 ай бұрын

hard slump, none of that rookie runny stuff

@WeberMachineWorks 3 ай бұрын

Right,glad you noticed that.Thanks After all the work of doing a concrete job we want it to hold up and last.

@AnnaCentauri 3 ай бұрын

nice one mate

@WeberMachineWorks 2 ай бұрын

Thanks

@fakdaddy75 3 ай бұрын

You should make kits .... self assembly

@WeberMachineWorks 3 ай бұрын

Thanks for the suggestion, I will consider that. Can you weld?

@fakdaddy75 3 ай бұрын

@WeberMachineWorks yes Think there would be a market for a self weld self hookup kit at right price with instructions

@WeberMachineWorks 3 ай бұрын

@@fakdaddy75 Cool thanks for your in put.

@johnlee7085 3 ай бұрын

Definitely a redneck strength test. Also lots more fun than strain gauges and hydraulic presses. Next time, I’d like to see something like myth busters where they launch a 2x4 at it or drop a bowling ball from the top of a tower.

@AircreteHarry 3 ай бұрын

This is one of the best design i have seen. Recycling the hot water heater tank and the washer parts, I will be on the lookout for both.

@WeberMachineWorks 3 ай бұрын

Thanks AircreteHarry, and if you want a glass door to see the fire you could double or triple pane the glass to still get some insulating effect.

@rongray4118 3 ай бұрын

Looks great Didn't know you were building these - we bought the MudMixer last year or I would have looked you up. We have an old drywall mixer machine I was going to try something like this for volumetric mixing (bulk). Thanks for posting your video!

@WeberMachineWorks 3 ай бұрын

Thanks,I am working on the next build.

@marlonvite4152 3 ай бұрын

I enjoyed your video.... you are very intelligent and great working with your tools ... the world is already better with people like you and I, and many comments that we learn also a lot from .... the world is full of common people easily brainwashed into hating and killing each other while their brainwashers genociders psychopaths capitalist masters get to live long, healthy, and wealthy lives .... while billions of economically poor people only want to live with peace and progress for all on earth, sharing only what each has best ..... I have researched carbon combustion, rates of combustion, and syngas and all and continue to make improvements for now only on my paper design .... I have warched hours on videos of fireplaces and wood stoves, including those that use wood stoves to run engines, trucks and electrical generators, and one day, I hope to share a wood stove like you do today with us all .... humanity has been using wood stoves for hundreds of thousands of years, and the design remains backward, mostly for safety reasons ... I hope to share mine soon. Thanks for the inspiration and for sharing your very good device ; )

@WeberMachineWorks 3 ай бұрын

Thank you for your kind words.And true words you speak.The more we share with each other the better for sure.I hope to be able to continue sharing anything I feel is useful and or innovative.And not sit around and wait for corporations to get us solutions.I have my own way of doing things that has been working and hope that will come through in my videos.I feel this video is particularly important for me to share because as we know so many people all over the world struggle in many ways to stay warm in the winter.I cant wait to see what you have come up with.

@marlonvite4152 3 ай бұрын

@WeberMachineWorks compared with others, you are also very good at creating videos ... don't stop, keep them coming, long and short videos too ; )

@WeberMachineWorks 3 ай бұрын

@@marlonvite4152 Thanks again,I sure will. I have a lot more cool stuff in the works.

@giysih 3 ай бұрын

Nice video!

@WeberMachineWorks 3 ай бұрын

Thank very much,much appreciated.

@indramorales570 3 ай бұрын

Good stuff… that thing looks like it’ll put out some serious BTUs..

@WeberMachineWorks 3 ай бұрын

thanks man,definitely serious BTUs with just a little wood.

@CP-qx2ff 3 ай бұрын

mind over metal

@WeberMachineWorks 3 ай бұрын

You know it :)

@rccola561 3 ай бұрын

Man, efficiency stove 3.0 is so slick! This is as cool as it gets. It’s hard to imagine any improvements for the next version. Thanks for sharing your process with us!

@WeberMachineWorks 3 ай бұрын

Cool thanks for checking it out.More fun stuff to come.

@precisioncomponentllc1820 4 ай бұрын

Nice job on making this!

@WeberMachineWorks 4 ай бұрын

Thanks

@emsea7279 4 ай бұрын

Plastic cutting board make good seal. Nice work

@WeberMachineWorks 2 ай бұрын

Good suggestion, Thanks.

@howardkettner 4 ай бұрын

Same situation (new bearing delay), slower speed shaft, needed a bearing asap to keep a crew of 100 working. The bearing that failed was on a large compressor that ran the entire plant. My dad who was head of maintenance found a piece of hardwood, gave some instructions to the machinist and that bearing ran for 4 x 8-hour shifts before the new one came in. (They just poured the grease to it every two hours.) Love the demonstration. Love what you're doing. New subscriber.

@WeberMachineWorks 4 ай бұрын

Great to hear that story.Thanks for sharing that. Thank you.

@CP-qx2ff 4 ай бұрын

@dougwolfe7637 4 ай бұрын

Snowblower shear pin with snap pin….

@WeberMachineWorks 4 ай бұрын

thanks i will pick one up

@greb3212 3 ай бұрын

I was going to suggest clevis and hitch pin, but the shear pin is a better idea.

@WeberMachineWorks 2 ай бұрын

@@greb3212 Thanks for you input.

@albertperrault6599 4 ай бұрын

Nice I was thinking the same

@WeberMachineWorks 4 ай бұрын

cool thanks

@rexmundi8154 4 ай бұрын

Nice work.

@WeberMachineWorks 4 ай бұрын

thanks

Ең жақсы KZfaq

Пікірлер