I need a new idle vid now that you put it up 100 more times
@ismaeladame349210 күн бұрын
What drop?.. I got a 2/4 but thinking of doing 3/5
@SyndicateLobo10 күн бұрын
@@ismaeladame3492 now with the coil overs it sits at a 4/6
@drippyninja723110 күн бұрын
Do these cams need a tune ? Or can I just leave it stock for a while
@SyndicateLobo10 күн бұрын
@@drippyninja7231 you need a tune for anytime you do cams
@drippyninja723110 күн бұрын
@@SyndicateLoboI just got the cams and installing them but ion have enough for the tune cause I just spend hella on the cams and other stuff will it still run with the factory tune till I have enough 🤣
@SyndicateLobo10 күн бұрын
@@drippyninja7231 i would wait till you have enough for tune honestly. I dont recommend running it without a tune. It'll run like like dog crap and would cause issues with drivability
@drippyninja72316 күн бұрын
@@SyndicateLobo bet I got the brenspeed tuner as well how long did it take them to sent you a tune I heard it takes like 7 days
@drippyninja723112 күн бұрын
What plugs and coils are you using I got the 5.4 version
@SyndicateLobo12 күн бұрын
@@drippyninja7231 motorcraft coils and sparkplugs
@tannerfishinghawk93818 күн бұрын
yo what year is your truck? ,what engine does it have in it? and very nice build glad i have a 2007 5.4L fx2 sport my first truck and just bought a 2018 f150 and imma start to mod the 07 truck.
@SyndicateLobo16 күн бұрын
It's a 2010 with the 4.6l 3v. Ford trucks are a great platform to build off of.
@allgasnobreakforlife352719 күн бұрын
What tire size are you running?
@SyndicateLobo19 күн бұрын
@@allgasnobreakforlife3527 285/35r22
@waynewilliams591123 күн бұрын
What cams did u go with
@TheTruthBeToId24 күн бұрын
Detroit Rocker cams also sound really good. I think they got the 3 valve engines figured out.
@302hobronco28 күн бұрын
The volant intake is a very nice piece. The stock 05-09 mustang gt intake with the dual tb might be a nice upgrade. Probably a little bit shorter runners than the truck intake, but longer than the frpp intake. So you might still stay in that sweet spot for torque, but gain some upper rpm. Also, you would want to either delete the intake runner flaps or remove them.
@jacobDDonyoutube28 күн бұрын
Were you from
@TRUBREW14428 күн бұрын
Bruh thats music to my ears!!! 💪🏿💪🏿💪🏿
@ramonzaragoza39729 күн бұрын
What kind of head light at those bro
@SyndicateLobo28 күн бұрын
They are Anzos bro
@302hobroncoАй бұрын
I just did comp 127400 cams in my 04 5.4L 3v. I had to replace springs and did livernoise phaser limiters. I also removed the intake runner flaps. Brendspeed is working with me on the tune still. I wish it had more chop at idle. But the power is very good.
@hbetz5300Ай бұрын
Thinking of these on an expedition. Have you noticed any low down power loss? I’m mainly concerned because it’ll be a tow rig and I want to beef it up as much as possible.
@SyndicateLoboАй бұрын
Torque still feels like it's there but the only way to truly find out would be with a dyno run
@lancedalebrown-zs7fwАй бұрын
Even dirty I still love this truck
@Long-nd8bqАй бұрын
That's a good looking truck. I like the FX2 and FX4 color matched ones. I'd probably remove the side steps though. Did you do the cam phaser lockouts?
@SyndicateLoboАй бұрын
I dont mind the side steps since they cover the bulky frame lol. But no. For these cams cam phasers arnt necessary
@Ccb1237Ай бұрын
What stage?
@SyndicateLoboАй бұрын
Stage 1
@jessbigboss09Ай бұрын
What is your mpg now city and high way post up a video of 0-60 times ! Let’s hear that American 🇺🇸 freedom!
@SyndicateLoboАй бұрын
Definitely gotta get some pulls filmed. Right now I average about 14 mpg city and 16 highway which isn't bad at all
@jessbigboss09Ай бұрын
Stock I’m getting 15.5 city Highway I’m getting 20-22.5
@jessbigboss09Ай бұрын
Will send you the link for the shorty headers later much love from the 805 CA
@ricardogarcia4267Ай бұрын
You stay around Fort Worth bro?
@SyndicateLoboАй бұрын
Yeah bro you seen me around?
@ricardogarcia4267Ай бұрын
Yessir what the insta
@SyndicateLoboАй бұрын
@g4.six
@jessbigboss09Ай бұрын
Have you done the tune up ? Just got mine done and it’s night and difference watching your videos made me want to get the same cams. I’m going with the high flow K&N intake. I also found these headers on eBay gonna be installing them on my 4.6. F150
@SyndicateLoboАй бұрын
I changed coils and plugs a few days after doing the cam swap. Share the link to the headers I definitely need some.
@alejandrodluna328914 сағат бұрын
@@SyndicateLoboyour best bet with headers and the xs power shorties there like 250
@jessbigboss09Ай бұрын
How’s your mpg after running the cams for a min still no codes ?
@SyndicateLoboАй бұрын
Mpgs did go up a bit definitely and no CEL codes!
@Lucky-zy8liАй бұрын
esta bien perrona primoooo
@SyndicateLoboАй бұрын
Gracias ahi va la trokita!
@zReignYTАй бұрын
Beautiful
@chakradjuzeus9275Ай бұрын
Nice truck! Sounds great with the Volant Box!!!
@tb1008752 ай бұрын
It's looking good brother.
@SyndicateLobo2 ай бұрын
It's coming together 🙏🏼
@alejandrodluna32892 ай бұрын
How much hp now
@jessbigboss09Ай бұрын
Brent speed says those add about 20-30 hp for the cams intake 5-10 hp
@SyndicateLoboАй бұрын
My mpgs did increase and you can definitely feel the extra power when you punch it.
@jessbigboss09Ай бұрын
@@SyndicateLobo what are your numbers looking like
@michaelroberts52972 ай бұрын
Put a mustang intake and throttle body. What gears are you running? Plus put a 3000 rpm stall with 373 gears. Go with long tube headers for best performance gains
@SyndicateLobo2 ай бұрын
3.55 stock gears. But Definitely want to do 3.73 gears in the near future.
@logicbewithyou1112 ай бұрын
clean ass truck. you do good videos for being this small, i hope you grow a lot more. But yeah you're not really gonna hear intake noises after exhaust, youd hear it if you had a stock exhaust.
@SyndicateLobo2 ай бұрын
Thanks! I always try to put out quality videos .
@TheTruthBeToId2 ай бұрын
Damn a 3v 4.6. Best bang for your buck is too boost that thing.
@Ghost5.42 ай бұрын
What kind of cam is in it? I wanna see if they got it for the 5.4 3v I also have a 2010
@SyndicateLobo2 ай бұрын
It's a Brenspeed Detroit Rocker cam they also make them for the 5.4 3v
@jacksondudes2 ай бұрын
first
@chris.forest12352 ай бұрын
Nice truck.. I really like the headlights, and I'm a fan of the chrome wheels. Built Ford tough.. Ride on
@SyndicateLobo2 ай бұрын
Thanks man!
@lancedalebrown-zs7fw3 ай бұрын
Love the black wheels
@manuelramirez82033 ай бұрын
glad i found this channel . i own a 2011 f150 with the 5.0 , previously owned a 2009 f150 with the 4.6 3v let me tell you i personally liked a lot more how the 3v sounds so much better. never thinnk i hered it cammed . its sounds good
@SyndicateLobo3 ай бұрын
I prefer the sound of a 3v over a 5.0 any day these 3vs are just so slept on.
@michaelbefumo-qg7ji3 ай бұрын
Yeah I thought about it after that I said at because it's a truck then I thought about it there's not much aftermarket support for a 54
@demarcusbody94373 ай бұрын
Cause they are trash 🤣
@randyrodriguez31273 ай бұрын
Sounds good bro
@tristencarkeek39333 ай бұрын
That’s absolutely insane
@robertpolanco34673 ай бұрын
What kind of muffler are you running?
@SyndicateLobo3 ай бұрын
As of right now its just a straight pipe from the cats back
@rubyhannah-59163 ай бұрын
Refreshing to hear some nice v8 chop compared to these new ecoboost and what not
@CarlosAlvarez-fw3nx3 ай бұрын
What year truck is it ??
@SyndicateLobo3 ай бұрын
It's a 2010 4.6l 3v
@CarlosAlvarez-fw3nx3 ай бұрын
Is it a 5.4 3v or 4.6 3v ?
@SyndicateLobo3 ай бұрын
4.6 3v
@michaelbefumo-qg7ji3 ай бұрын
It' says ,54
@SyndicateLobo3 ай бұрын
@@michaelbefumo-qg7ji it's a 4.6l 3v
@isaiahlara61013 ай бұрын
Where u get ur Texas badge at ? The one on the tailgate?
@SyndicateLobo3 ай бұрын
I got it off Amazon I'm not sure if they still make them tho
@isaiahlara61013 ай бұрын
Bad mf fr
@jessbigboss093 ай бұрын
Back pressure loss ? No check engine light ? You have cold air intake?
@SyndicateLobo3 ай бұрын
No back pressure loss. No check engine lights, oem intake for my application
@jessbigboss093 ай бұрын
@@SyndicateLobowhat you trying to run ? Would caí make your set sound different ????
@SyndicateLobo3 ай бұрын
@jessbigboss09 I'm looking into some JBA shorty headers right now actually. But ideally I would like to run headers, 3in pipe w/ H-pipe and duel side exits to really get the sound out of the cams.
@user-yp1nj2mv9w3 ай бұрын
روعععععهه ❤🔥
@TheScorpionSwayzeTrainBandit3 ай бұрын
Sounds so nice on idle damn
@TheScorpionSwayzeTrainBandit3 ай бұрын
Pass by sounds crazy too love the build
@SyndicateLobo3 ай бұрын
It's coming along, I can't stop watching the flybys lol
@tb1008753 ай бұрын
It's looking good brother. 👍
@SyndicateLobo3 ай бұрын
Right on 💪🏽
@Bowman2103 ай бұрын
Who did you get tuned by?
@SyndicateLobo3 ай бұрын
I got a email remote tune by brenspeed.
@groundzero40444 ай бұрын
It sounds more like dog 💩, I’m sure it runs like dog 💩!!!!