dont have to change the gasket of the spark plugs? also what happens if you lose one of the bolts?
@aussiemowers6 ай бұрын
G'day How do I tell the G4 from the new LM carby?
@andrewglasson39167 ай бұрын
Love it. I have a Victa Vantage 2 stroke which would be about 25 years and it still goes, usually starts first pull.
@crankhandle7 ай бұрын
Worse carburetor design and terrible choice of materials. They also run super rich even when correct. Trust an aussie to come up with a half ass carburetor 😂
@crankhandle6 ай бұрын
@@wxyzxdllnot that easy without making a manifold ect yourself. The head also is prone to warping and blowing the shit paper gasket if you cut long grass. The old victa mowers were better but if you want a two stroke, suzuki and Briggs both made good one's
@stevenjunemann5507 Жыл бұрын
Great vidio mate you were very helpful cheers steve
@deanoh6414 Жыл бұрын
Just wanted to say thank you for this video Did my son's Getz after seeing this and it giving me the confidence to tackle it. A few snags....had to get forceful to separate cover from head...and there was a fair bit of old gasket to remove so had to use a sharp edge to do that which didn't sit comorfortably with me...but a smooth down with 2000 grit and it levelled out the minor score marks. Good tip on the silicone. I used RTV and left 24 hours before start up. Fingers crossed it is OK. Took me the best part of 4 hours...but that was also cleaning a very coked cover and changing the spark plug tube seals.
@CJ-dx5mc Жыл бұрын
Beautiful video.
@mustangdude11 Жыл бұрын
Thank you very much!
@Shadow1986 Жыл бұрын
cheers mate. ur a good kent
@scottvincent7666 Жыл бұрын
Does it pull vacuum?
@najaclark966 Жыл бұрын
hey. i love this educational video. im aiming to do a tune up on my 08’ hyundai accent & before i got started i noticed i had oil leaking onto my spark plugs… i was told to just change out the valve cover as that might be my problem.. but now im wondering could it be those “spark plug cups” having a crack or hole in them? it would be great if you could help me out with a bit! thank you in advance
@Shadow1986 Жыл бұрын
could be, but unlikely. only way to be sure is to take the cover off anyway
@mustangdude11 Жыл бұрын
The industry standard is to replace the rocker cover gasket and spark plug gaskets. When you do, make sure to put silicone at the camshaft seals. That's a common leaking area. A retension after a few engine heat cycles is advisable, the gasket moves & shrinks.
@faezalaziz9322 жыл бұрын
can I use this technique on hyundai 2009? and do I ned to use bolt washer or seal to make it more tight...
@radius49142 жыл бұрын
My gasket looked so thin compared to yours
@marvinatlas22222 жыл бұрын
2004 salañdrà
@karenregan94912 жыл бұрын
HI Mustangdude We have been trying to find a DOHC gasket seal everywhere just like the blue one in you video, IS there anywhere you know of, as all gaskets seals we have tried are way to thin, which keeps causing the oil to leak from rocket cover, Your help would be greatly appreciated. In desperate need of your advice.
@nvmcrider84752 жыл бұрын
I was thinking about getting a 390 so please post the fix. Hopefully, just a loose wire or kill button malfunction.
@andrewvelasco75572 жыл бұрын
Thank you
@mustangdude11 Жыл бұрын
You're welcome
@unknownpresident2 жыл бұрын
Plastic fantastic carbs P.F.C are evil saying that I fixed a few so far , the white plastic is more sensitive to uv light , and gos brittle and cracks . People over tightening the screw is also causes problems . The replacement plastic nediles and or plastic cover hole are slightly different sizes , depending on original and after market . I never go by the lines, as I always point the arrow following gravity . Some people love ❤️ G4 , not me ! That's just one bit of the carb , lots more problem areas the G4 has .
@JuanMartinez-wk4tq3 жыл бұрын
Como cambiar estopera de cigüeñal
@poita_m71423 жыл бұрын
Should do it the R code rear end was brand new lol...
@garymarkham41673 жыл бұрын
Everyone who has a Aussie 2 stroke with a G4 Carby must watch this tutorial..I learned a lot and thankyou for sharing your knowledge mate.Fantastic video..Most times when a 2 stroke has a problem its the Carby and most of us would miss the brass seat as a problem!I am repairing a 1990 Victa Mustang 2 stroke it has the flat bright Orange Cowl..pulled it apart and got to the carby and could see the seat had moved to the bottom...I dont have your homemade tool yet and used my welders file and it flipped up and hit me in the eye..lol..no damage done..so reseated it and all looks good...Thanks again.
@DenizDales3 жыл бұрын
I think the tree killed the ZOHD
@alexsterling7393 жыл бұрын
How long did this take you to do in real time? Great video, btw
@woodworkingideas_3 жыл бұрын
why did you applied the glue just in the corner? not to whole surfaces?
@mustangdude113 жыл бұрын
The "glue" is automotive silicone or Silastic, it's not needed on the whole surface because the rubber gasket is meant to be a dry fit. Just put it in the corners because that's a common leak spot. Putting sealer on some gaskets like cork can cause problems with the gasket slipping from it's intended position and a leak will follow.
@justinspeegle46683 жыл бұрын
Skipped the coil pack ones witch are the most common problem
@mustangdude113 жыл бұрын
I no understand??
@a9entjones3 жыл бұрын
Fords are gay.
@a9entjones3 жыл бұрын
Shit pilot
@a9entjones3 жыл бұрын
You can be my wing man any time.
@Flash_AU4 жыл бұрын
not sure if you're still replying to comments. but I have noisy and possibly damaged lifters. ran lifter tune up and it has not quieted them down. got an 07 with 1.4 for my first car. (previous owner flogged the poor thing) she does only have 106,000 and I got her at 89. so I got lucky on the milage. but I'm thinking of trying to do the lifters my self as I'm getting quoted 900 odd bucks and I don't have that type of money on hand. would you reckon its a relatively easy job to do?
@migeed34524 жыл бұрын
Where to buy the gasket?
@mustangdude113 жыл бұрын
Your local aftermarket parts supplier or buy genuine from Hyundai.
@a9entjones4 жыл бұрын
I wonder if his dreams are quiet...
@mustangdude115 жыл бұрын
Heres a link to the same video with the volume corrected. kzfaq.info/get/bejne/pN90mLqaqdbFj2g.html KZfaq don't allow me to edit the volume so I downloaded it again, you can hear it easily now, sorry for any inconvenience.
@mustangdude115 жыл бұрын
Heres a link to the same video with the volume corrected. kzfaq.info/get/bejne/pN90mLqaqdbFj2g.html KZfaq don't allow me to edit the volume so I downloaded it again, you can hear it easily now, sorry for any inconvenience.
@eva420xo65 жыл бұрын
Can't hear you!!!!!
@mustangdude115 жыл бұрын
Heres a link to the same video with the volume corrected. kzfaq.info/get/bejne/pN90mLqaqdbFj2g.html KZfaq don't allow me to edit the volume so I downloaded it again, you can hear it easily now, sorry for any inconvenience.
@eva420xo65 жыл бұрын
@@mustangdude11 Perfect! Thanks! Pleasant accent😀
@lynndempsey40965 жыл бұрын
Very sweet car!!!!
@bertschodts43055 жыл бұрын
Nice wheel setup! If it runs 275's in the back, I guess it's the 15x10" wheel of Wheel Vintiques, correct? And what are the wheel size in front: 15x7" or 15x8" With 235, 245 or 255?
@mustangdude113 жыл бұрын
You are correct with the rear wheels Bert however I had the offset changed due to the correct offset not being an option. The fronts are 15x8 with 245s
@prentissreese64485 жыл бұрын
perfect audio video
@gs91946 жыл бұрын
man my 2005 elantra has the same engine wtf
@joshdavis20646 жыл бұрын
Same with my getz lol
@mustangdude113 жыл бұрын
Yep
@mustangdude116 жыл бұрын
It sounds like the air conditioner electric fan isn't starting up. Run the engine with the AC on and watch for the fan to start up. It might start whenever the AC clutch is engaged, I'm not sure. But it should start as the temperature starts to rise.
@gs91946 жыл бұрын
mustangdude dude i just did the same thing i changed the gasket and its leaking like crazy plus its making air leak to but i didnt use the gasket maker or the silicone is it the problem and my valve cover has a little crack in one of the bolts holes
@gs91946 жыл бұрын
and its even heating up real fast
@mustangdude116 жыл бұрын
You need a new valve cover, and use silicone in the areas at the camshaft as the video shows. Then your problems are fixed.
@mustangdude116 жыл бұрын
More information is needed. First fix your oil leaks.
@mandradea16 жыл бұрын
I have a 2009 hyundai getz, when I turn on the air conditioner the engine temperature goes up and the high temperature dash light comes on. The radiator panel is clean, there is no refrigerant consumption. The problem occurs only when the air conditioner is turned on. please help me. I'm from Ecuador.
@mustangdude113 жыл бұрын
Check you electric fan is working
@zubberification7 жыл бұрын
Did you ever put in the free wheeling hubs on the Isuzu?
@joehyundaitech79617 жыл бұрын
I would like to know if there are 4 groments that come in the kit for the 4 spark plug holes ?
@LaughAtTheSky927 жыл бұрын
Why was this so relaxing to watch and listen to
@mustangdude117 жыл бұрын
Serenity now :-)
@tysingletary39087 жыл бұрын
my hyundai santa fe 2007 is tapping how could i go about fixing the problem or is the car a total lost
@mustangdude117 жыл бұрын
I'm not familiar with the Santa fe engine. I would change the engine oil & oil filter being sure to use the correct viscosity oil for your engine. Thin old oil may be allowing the hydraulic lifters to bleed down which would result in a noisy tapping sound.
@ivanjerez24177 жыл бұрын
Thank you for your help! very, very helpfull. thank you sooooooooooo very much! very well explained...
@mustangdude117 жыл бұрын
I like you Ivan.
@guidolondonochara8027 жыл бұрын
mazda1600
@mustangdude117 жыл бұрын
I'm confused??? Are the lights on Guido?
@IsaiahKey7 жыл бұрын
Hyundai xg350 videos on KZfaq...hell no?? Ok😓
@mustangdude113 жыл бұрын
Gotta love Hyundai
@StevenUspensky7 жыл бұрын
Thanks for this vid mate! Did you need to remove the front bash plates? How much oil did you use?
@mustangdude117 жыл бұрын
Thanks Steven. Only remove the rear bash plate, you can get at everything just fine. Oil Capacity: Not much from memory. I pumped out of a 20l drum so I didn't measure it. If you bought a 4 litre container of oil you will have some left over.
@JamesWoods20787 жыл бұрын
Hey, where did you get that blue valve cover gasket, i cant find any that fit my Hyundai Coupe 2001 anymore. They are all either to thin or do not sit correctly on the engine due to being too thin.
@mustangdude19157 жыл бұрын
James Woods get the dohc gasket, and not the sohc gasket. It should fit.
@mustangdude118 жыл бұрын
Oily spark plugs, assuming the plugs are the correct heat range would indicate an oil usage problem. Oil getting past the rings or valve stems.