Would you recommend self tapping screws after drilling the hole?
@dalewortman331323 күн бұрын
Do you have videos on how to replace the axles like what sizes to use and wheel size if I needed to replace the wheel also? I'm thinking about restoring a couple old hotwheels cars
@RustBeltDiecastRacing19 күн бұрын
I don't but that's a great idea! I just might make that video
@FireFlower4626 күн бұрын
Why were all three of my favorite cars (Chancy, Whippy, and Trips) put in the same main?
@RustBeltDiecastRacing19 күн бұрын
It all just depends on what heat they ran in but Chance is our favorite too shhh don't tell anyone
@DocCason9793Ай бұрын
Just thought you might like to know, not knocking your way. I don’t make videos so I have to type it to put it out there, sorry.
@DocCason9793Ай бұрын
Rather that the paint/needle tech, you can also use “Sharpie” (ultra-fine tipped permanent markers) to fix door, trunk, hood, vents, grill, tail pan, etc. Anywhere there is a recessed line/area. The same places that you just use the paint. It is not “permanent” like paint, but because of the recessed nature of the seams/areas they are used on, it will not wipe away as it will if you were to use it in the roof or hood flat areas. Just mark the seam/recessed area, let it dry, and then come back with a soft cloth and wipe away and over color (like i said it will take away the accessible marks/areas but not the recessed marks/areas. Works well for display cars, but can wear out with play.
@dr_dodge_racing2 ай бұрын
nice video
@AllenLeonVanHouten3 ай бұрын
😱👌 love it
@sniffer62853 ай бұрын
I too like to scratch the paint on the wooden table as I'm drilling the rivets
@RustBeltDiecastRacing3 ай бұрын
We’re not so different you and I…
@marksentance99133 ай бұрын
Wouldn't it make life easier if they came screwed to begin with lol. Im thinking of Having a go and doing wheels swaps probably as far as i would fare go 🤣
@RustBeltDiecastRacing3 ай бұрын
Right?? Make it easy for us, Hot Wheels! 😂
@91lifetime233 ай бұрын
Cool video, so micro set and micro sol are not necessary for car models?
@ShawnStafford-19783 ай бұрын
I do wheel swaps and repainted custom cars. I like to drill pilot holes for screws to reassemble them afterwards.
@percyvoss89433 ай бұрын
Do Rotary tools work well?
@RustBeltDiecastRacing3 ай бұрын
Yes, actually a rotary tool with a carving bit (ball) works well to take off the rivet head.
@percyvoss89433 ай бұрын
@@RustBeltDiecastRacing Sweet! Thanks man I appreciate the quick response! I got my first rotary tool yesterday and I've been struggling like hell, your video absolutely helped!
@RustBeltDiecastRacing3 ай бұрын
@@percyvoss8943 that’s great to hear! Keep at it!
@ShawnStafford-19783 ай бұрын
@@percyvoss8943I bought a tapered drilling tool instead that works well for any size rivets that works well
@van_aguilar3 ай бұрын
how do you make a waterslide decal?
@RustBeltDiecastRacing3 ай бұрын
What are you a cop?
@TalkingGIJoe4 ай бұрын
Not sure if this is funny or not?
@Miles19654 ай бұрын
Always wanted to do this but never thought it could be done! Thanks so much this is amazing! (Nice mustang btw)
phew, I was worried we were getting a different type of yule log
@RustBeltDiecastRacing7 ай бұрын
Ya never know with Dan
@zeldadiecastracing7 ай бұрын
Merry christmas bro
@RustBeltDiecastRacing7 ай бұрын
Merry Christmas!
@jpkreations8 ай бұрын
Nice! Is it possible to put "Monster Micro-Machines Wheels" on a regular car?
@RustBeltDiecastRacing8 ай бұрын
Absolutely! Maybe I’ll make a new video…
@jpkreations8 ай бұрын
@RustBeltDiecastRacing Awesome!! I customize action figures and sometimes I modify 1/12 and/or 1/10 scale military vehicles and I would like to try (Just this one time) Micro Machines without wasting a lot of money experimenting... My goal is to make a military jeep with a gun/turret, and big wheels. My mini version of a jeep from an 80s Arcade Game called SilkWorm! Thanks!!!
@RustBeltDiecastRacing8 ай бұрын
@jpkreations2647 oooo that sounds cool!
@Enthcreations8 ай бұрын
Cool
@jaydavidson-kg9gr9 ай бұрын
good vidio, I've never used lube and never had a problem
@maximojoe739810 ай бұрын
There is no need to tap these posts, other than that youre using a tried and true method
@WillieBeard10 ай бұрын
Why the music/noise?
@RustBeltDiecastRacing10 ай бұрын
Why the beard?
@derekriepe140110 ай бұрын
And the day time Emmy award goes to…..
@LiveYoungDieCast10 ай бұрын
Oh man! That was a good one 😂
@epvideosdiecastracing10 ай бұрын
OMG 😂😲🤫
@shredderspeedway429810 ай бұрын
Datsun Dan Does your mom Debbie, should be your next video 😅😅😅🎉😂❤
@zeldadiecastracing10 ай бұрын
Awesome video bro
@baycitydiecastracing10 ай бұрын
Datsun Dan you’re my hero!!
@905Diecast10 ай бұрын
I love it!!! Nuthin like a little Datsun Dan to face kick off the weekend!!!
@IndianaDiecastRacing10 ай бұрын
#maniacallaugh
@nickdeavers581610 ай бұрын
So odd
@RustBeltDiecastRacing10 ай бұрын
Or is it not odd enough?
@nickdeavers581610 ай бұрын
@@RustBeltDiecastRacing it's perfectly Paufler
@rubenmahrla980010 ай бұрын
I couldn't help notice you don't know what a fender is, pro-tip: it's not a bumper ;)
@nickdeavers581610 ай бұрын
😅😅😅😅
@casual-bat-man11 ай бұрын
Wait a second, I didn’t come here to skim a cat 🤨
@paddyoak111 ай бұрын
Why not hit the car with a lighter/matches and take some paint off for real. Let rust naturally. That’s what I might do. Have you tried that before? Thanks.
@scottcuilty415411 ай бұрын
Just tried it worked 👍
@vibeaux455211 ай бұрын
I have two Hot Wheels cars, one a used 1967 Chevelle Hot Wheels car and the other is a used 1968 Barracuda fastback Hot Wheels car, each of which have straight bodies, still-intact interiors, still-intact windows and straight chassis, the Chevelle's somewhat-weathered-chassis is plastic and the Barracuda's somewhat-weathered-chassis is metal, their bodies need new paint, their windows need to be cleaned up as do their chassis and their wheels do need to be switched out, albeit my hands are not fully capacitated due to various health issues from over the years and so, here's my question: Would you know of anyone out there who does clientele repair work on any such Matchbox/Hot Wheels cars? If yes, please, let me know, I really would appreciate it, thanks.
@RustBeltDiecastRacing11 ай бұрын
Unfortunately I don’t but I’ll keep an ear out for someone.
@dylanyoung665411 ай бұрын
Is there a way to put the car back together that doesn't involve screws? First time doing this and want to see if its something i like before buying a bunch of stuff. Would superglue work?
@RustBeltDiecastRacing11 ай бұрын
No super glue but you can use JB Quick or hot glue
@ronnieblack2482 Жыл бұрын
Great eye, truly. I found liquid masking over a light rust or a mix of rust shades saves a bunch of time. I just tried the "Rust all" kit with aging solution. It's incredible but God is it a long process. The rust is thinner than the thinnest reduced candy that you cab can imagine. The reward however is amazing. It lays flat and you just keep brushing. While it's drying I use that rust with charcoal and silver and do some streaking. The rusts dry very bright. You then black wash with a sponge or brush.
@RustBeltDiecastRacing11 ай бұрын
Thanks for the tip!
@noexpectations7322 Жыл бұрын
Bro I just wanna take apart my hot wheels
@RustBeltDiecastRacing Жыл бұрын
Have at it bro
@TeamJunkYardDog Жыл бұрын
I never thought I would spend so much time watching Die cast racing lol