I bought 24mm 1.8. It does a lot of knocking sound while recording. I sent it to the Canon repairs. It was marketed as silent for video but for me it did a lot of noise. Its been 1 month and ticket on Canons website is still "Open" and "In procress". Cant believe that even in 2024 they are marketing quiet lenses for video and cameras are getting A LOT of video features and lens are still noisy as hell like in the 2010. My Kit lens 18-45 and 55-210 lenses are dead silent while photoing or recording video. Even my EF-S 55-250 was dead silent for video. There no simple everything to hear with any mic when using those. If my 24mm 1.8 comes from the Canon service I will change it to something else if that still makes that knocking noise.

I instead use 4 bar pressure on my machine. And the sweet taste of the coffee is amazing.

Do they make that annoying muzak sound as well.

Great video. It’s unacceptable that a 8k machine has any leaks that early in a Home! Let alone a coffee shop. I hope they get their shit together I’ve wanted this machine for a long time.

Just thinking if I should buy second hand VA E1 EXP machine for 2000 euro? Is it worth it?

I thought the Vostro used a T47a BB with the drive side being slightly thicker than the non-drive side. This appear to be a regular T47 or am i missing something?

Leaking from boiler is no acceptable for machines with this price point. In terms of reliability, my experience with La Marzocco is way better. Anyway, thanks for your sharing. And this video helps my to determine which machine has to eliminate from my list.😂

Amazing how machines make cleaning easier! I wish i had double thinking before getting very basic machine.

Nice !! Where do they print the size !?

Clean it. Don’t use water mist. Read the manual.

😱😱😱😭😭😭😭

what machine is that?

Nice vid.. what happened to the eagle One prima?

Dont use Arctic MX Paste for GPU if you Card more than 200W use, hotspot temp problem pre programmed.

0:45 Hi bro , Do you know what size for this screws in up ? Becuse my screws was losen 😢

Mind if I ask where did you get this 2nd hand in HK?

Atom 75

Hello , my qto. 75 not grinding , there's like a tick when I turn it on but no grinding

I got mine w grounds and they say that they test every model. . This is my last and best grinder. I got the SSP brew burrs.

Use britta filter on my rocker for 5 years now and havent descaled it so far. Yours looked as it didn't have any buildup at all.

Been nice to show a bit more about the probe, positioning, etc. I had to go back and watch again to spot the probe.

Where did you source the shorter lever? Since it's shorter is it much more difficult to pull?

Thanks for the video. What's noise at 1'44?

hi, was your battery charged out of box? I've just received my complete set (but the charging cable is yet to come), but my rear derailleur isn't switched on after connection to the battery. I assume the battery is dead, but I can't find any information on whether or not it comes charged out of box.

Where is prima

Thank you!

Hi Jake, busy with 14mths old. Haha. Here is one

How you getting on with the machine, not seen any uploads for a while. Hope all's ok

After soaking it. Do you rinse it with hot water before use?

That took 50 sec. With a grind-by-weight it takes just few sec.

Great looking bike, love the build! #RobbArmstrong

I gave you a thumbs down because you failed to monitor yous batteries and this made for a shitty video!

Just bought the Pesado E61 and kinda like the taste. It's very different compared to the 200RNT or the stock that came with my E61, and imo preferable. But I feel like the saturation mechanism of E61 is inferior regardless of shower screen, and your E1P results may differ completely.

You probably already got it fixed but for other people, the newer P64 has two screws that adjusts the burrs located on either side of the top burr carrier, it has to be loosen to take the carrier off. When you put it back you have to make sure that you do not tighten these screws too much or it will bind the burrs.

Ive just orderex the same screen, im getting channelling in one spot at the front. Im also gonna change the basket.

Well done. More than enough there to persuade anyone to buy SRAM AXS or stick with mechanical

내 자전거도 팩터 오스트로 레이싱 그린입니다. 좋은 영상 감사합니다.

What saddle are you using?

Great video, interesting that the 52 I measured (black with silver logo) is around 813g and the fake 52 that I measured is 902g.

I thought Factor said 30mm I max on spacers.

0:11

Honestly, it's so disappointing, it is one of the most beautiful looking home/commercial espresso machines. I've owned a Breville dual boiler for five years, and it's never, ever ever ever had a single problem. If I am going to pay 8 1/2 thousand dollars for an espresso machine, and it starts leaking within 14 months, the manufacturers have some serious issues they need to fix. I simply do not under any circumstances, expect this thing to have any problems the first five years with regular back flush and cleaning.

Nice build and good choice on the ultegra- There is so little difference b/w dura ace and ultegra aside from the price!

Thanks for the video. Comparing with EF35/2, the RF35/1.8 sounds so quiet. I cannot hear any AF sound even with the built-in mic. My main scenario is using external mics (3-6 ft away) to record piano performance in a quiet room. Do you think RF35/1.8 will work well for this? Thanks again!

Bene la bici e bella allora pedala efficenza assicurata nastro dorato nel manubrio più nella

The vacuum breaker is inside the copper cup top left of the top of the boiler.

Awesome video! Just embarking on a similar Ostro VAM, Zipp 404, Dura Ace Di2 build and this was extremely useful. Thanks.

🙂

Check the front hub caps, if they wobbles, it could be the reason of disc rubbing. If you swicth to DyraAce cassette it will not last long, it is softer material than Ultegra.