Thanks for the useful video. I can program my two garage doors. Save money from buying a second one.
@davidleary100Күн бұрын
I chose model 3120 and it took me here, which has nothing to do with my model. The written instructions are not helping at all. We have 2 cars that have always used Homelink and we cannot get this new opener to program. And of course, try calling the 800#. You will never get through. I am really sorry we didn’t spend more on a better Liftmaster.
@bunitgarage26572 күн бұрын
Don't work, returned mine today. What a waste of time.
@barry289073 күн бұрын
I'm connecting the DCM to my existing wired push button. The printed instructions are careful to indicate the proper polarity for this connection. But when connecting the pair of wires to the DCM, there is no indication of polarity. I guess I have a 50% chance ...
@BelindaWoodson4 күн бұрын
Everybody in the United States Shall Live abundantly (Said the Lord)
@BelindaWoodson4 күн бұрын
🍑Georgia lottery Game Slip 👨🔬👩🔬🧑🔬 Grant IT !
@ryanmcmahon6156 күн бұрын
I have the 2128. I press the WiFi button till it beeps. The lights flash blue, green, red for approximately 30 seconds before turning solid red. It never connects to my phone.
@GenieCompany4 күн бұрын
Please reach out to our Aladdin Connect support team at 1-866-599-4995.
@joenmass6 күн бұрын
Goodluck trying to connect if you have an Xfinty router. You have an easier time programming a lunar space launch to the moon.
@shandrikasmotherman18047 күн бұрын
Thank you so much for posting this!
@ItsPyroe9 күн бұрын
Worked for me but then I was going to mount it (which means I had to take out batteries to allow access to mounting hole behind) after mounting no longer worked… kinda bs is this. Returning Forsure “chamberlain myQ” trash.
@dennisfromiowa50639 күн бұрын
How the fuck in 2024 this an 80 step procedure that never worked. This should be a two step process. This opener running n dos 3?
@WinkingP-E-N-1-516 күн бұрын
I have followed every step verbatim. I don’t get a reset tone, no flashing back lights, no movement. Definitely not a quality product. Will be shooting this device at the gun range.
@emadamer940416 күн бұрын
Liftmaster Chamberlain only hit once learn button and 4 numbers and then enter done ❤
@emadamer940416 күн бұрын
Genie 😂😅
@evolvingsteve974217 күн бұрын
Dipswitch section was very helpful! Thank you!
@JustChadinTX-bv7yv18 күн бұрын
Could you please try a little harder to make a more frustrating and difficult process AND then make the speed of the instructions on the video just slightly too fast for people to actually follow along? Please.
@rxonmymind836219 күн бұрын
Thank you! 2024 checking in.
@dbinder7922 күн бұрын
Please post more videos showing how Aladdin works with Google Home. Seems Genie has a better thing going, but MyQ is known of by more folks.
@elijahcharles110723 күн бұрын
Can we see how to connect 2 doors
@GenieCompany18 күн бұрын
Its the same steps as connecting 3 you just hit the number 2 instead of 3 when you are going to the step of adding more doors.
@2pieceharleyaudio24 күн бұрын
Didnt work for me. Purple never went to blue. Just straight reds
@GenieCompany18 күн бұрын
Please reach out to us at 1-800-354-3643
@ZillaYT24 күн бұрын
How about Chamberlin with purple Learn button?
@GenieCompany18 күн бұрын
Please contact us at 1-800-354-3641 we can walk you through it over the phone. Full instructions here; www.geniecompany.com/files/en/installation-programming/universal-wireless-wall-console
@m.j.thayne559125 күн бұрын
Dude. This video is a LIFESAVER
@ruddyorti311926 күн бұрын
Thnks a lot my friend I watched like 6 videos and your was the winner I finally fixed my door thnks to u hahah 👍👏🫡
@peterlabelle257926 күн бұрын
Tried complicated procedures repeatedly on Liftmaster operators with yellow and purple learn LEDs. After failing multiple times, I noticed button 2 I was using when programming the opener with purple LED worked on the operator with the Yellow program light. The instructions for this "universal" remotes are long, convoluted, and wrong.
@JenHiipakkaАй бұрын
I was able to connect to wifi fine, but does anyone know how to make the garage door go up faster, seems a bit slow.
@medicalantiquesАй бұрын
Best description. Finally got it to work!
@williamb.6918Ай бұрын
Is this an accurate statement? "Programming will not be lost after replacing batteries and programming is complete" After two years (around the time battery replacement is recommended) the unit will no longer open the door and exhibits the same behavior with fresh batteries. I have seen various references to the units losing their programming when batteries die or are replaced as well (which is contrary to the information in this video).
@GenieCompany18 күн бұрын
There were 2 different variations of this keypad, if you have the original version, then no, (separate video), if you have this exact version, then yes it should save the programming upon battery removal.
@Oh.CanadaАй бұрын
Cut to 1:27 to the useful part
@chunkynfunnyАй бұрын
Genies are pos .. my step parents live in a complex where they all have genies from the builder and everyone of these things don't work it's 44 units
@GenieCompany18 күн бұрын
If all 44 are not working that likely is not a Genie issue, but an external issue such as, such as radio frequency interference, if they live next to a militar y base, or possibly electrical? They can reach out at 1-800-354-3643 for further assitance
@Boblobblaw88Ай бұрын
So I shouldn’t stand UNDER the door while I’m putting it down?😆😆😆
@peterthienlele5198Ай бұрын
❤❤❤
@rodeo0808Ай бұрын
This didn’t work. This really is a horrible process especially when the app goes down.
@eddrichardson6893Ай бұрын
Worked like a charm - excellent video and verbal instructions. Thanks.
@myPPPLabАй бұрын
does it work with solid doors?
@GenieCompany18 күн бұрын
NO for use on residential sectional garage doors only
@myPPPLab14 күн бұрын
@@GenieCompany actually it does - have already installed 2055
@eustaquiodurazo7102Ай бұрын
Thank you so very much Sir.If you only knew how helpful your video was.it's almost 10pm right now in Redlands ca.i misplaced my remote and have not used my keypad for close to a year.Thanks for good instructions.GB
@jacobisworld9516Ай бұрын
How Many Doors Can A Key Pad Program
@mad125100Ай бұрын
This fixed my problem.
@jolenewallace1146Ай бұрын
Thank you. This video is much better than the one on the Home Lnk/Ford site. After 2 frustrating days, 30 plus minute attempts, I was finally able to complete programing my 23 Ford Edge.
@floppacentral26572 ай бұрын
Thank you for this video.
@zomgosz15032 ай бұрын
This video is terrible you are giving us a prolog that's 5 minutes long before even telling us how to program the keypad. If you don't know basics of putting batteries you should seriously get help.
@neilmazzanti62692 ай бұрын
Awesome video been trying no lie for years to get my homelink in my truck to work this worked perfectly the direction sucked balls thanks again
@Averagesasquatch2 ай бұрын
I thought I did something wrong when the door kept operating after I did the factory reset on the code. Turned it it's just that if you hit any key too soon after putting in the code any key will open it. I couldn't program the new code because the door kept opening. I just let it sit a minute then programmed the new code and it worked.
@chris76-012 ай бұрын
How much flex is normal between the opener motor body and the rail? Mine seems to have alot despite all the screws being tight so I'm going to reinforce it with custom extension bars.
@Kevin-yn7ju2 ай бұрын
I WANT TO FUCKING DIE
@maxjones11922 ай бұрын
My remotes keep unpairing themselves to the opener and I have to reprogram them to work again. Anyone know why this is happening
@doyeonkim50812 ай бұрын
Why the fuck would you skip the programming part after showing all the tinest manual shit. When programming is the most important. This is stupid
@ce79582 ай бұрын
Tried 2 keypads so far and no luck getting them to work. Genie garage door opener is from 1994. Keypad looks just like the one in video. How do I know if keypad will work with my genie garage door opener?
@CheriseJohnson-NOAAAffiliate2 ай бұрын
Thank you I literally programmed my garage in less than a min!
@AshleyTodd12 ай бұрын
Only 5 steps and combinations?? You should have at least added a step where the user has to spin clockwise in circles three times while depressing all buttons. Your engineers need to get it together!!