Thanks for the interest! Please email [email protected] or call 1.800.872.5726. We look forward to hearing from you!
@4.0gpa442 жыл бұрын
Put a 100hp diesel on it and it would run better. Preferably, a remanufactured pre emissions engine.
@complexsimple72732 жыл бұрын
The SC-12 I've been using keeps getting jammed at the cutter head. I can get through a forklift sized load and by the end of one load it is jammed so bad that it has to be taken apart and the pieces manually cleared out. The pieces are being fed one or two slabs at a time. I wonder if others have the same issue.
@luke_haughwout2 жыл бұрын
Great job guys!
@Ithzzz2 жыл бұрын
looks like a nice machine! but how come there be no covers for any of the hydraulic lines and the engine is almost completly exposed ?
@SalscoInc2 жыл бұрын
Thanks for watching! They are like that for faster and easier maintenance by a mechanic.
@jeffsnider35882 жыл бұрын
Saw one of these at the Sunbelt Ag Expo, Moltrie GA, it looked to be well made.
@SalscoInc2 жыл бұрын
Thanks for visiting us Jeff! We were glad to be there...
@abhilashreddybonapally21552 жыл бұрын
What is the cost?
@SalscoInc2 жыл бұрын
Thank you for your interest...Email [email protected] for product inquiries on this machine.
@Wallys_Microbes2 жыл бұрын
this is amazing!
@SalscoInc2 жыл бұрын
Thanks for watching! The Safety Shield can also be retrofitted onto older chippers...
@Fayettepropertysolutions3 жыл бұрын
Is this still available?
@SalscoInc2 жыл бұрын
Thanks for the question! Absolutely...Yes we are still making Track Chippers. Give us a call at 800-872-5726 and ask for Jack. You will love this awesome machine! www.salsco.com/products/commercial-wood-chippers/engine-driven-hydraulic-feed-chippers/model-8635tk-6-track-chipper.html
@anhkhoacao17643 жыл бұрын
May nay mua ở đâu đc vậy .ai bị et cho tôi sdt voi
@SalscoInc2 жыл бұрын
Please call 1-800-872-5726 or email [email protected] so we can contact you directly.
@calebk49333 жыл бұрын
How much does this model cost?
@SalscoInc3 жыл бұрын
Thank you for the interest Caleb! This machine is custom built, depending on what you need…Please email our Sales Manager Jack at [email protected] or call our toll free number 1(800)872-5726. We hope to hear from you soon!
@najdouhassan63173 жыл бұрын
Haw.matches
@SalscoInc3 жыл бұрын
Thank you for the interest Najdou! This machine is custom built, depending on what you need…Please email our Sales Manager Jack at [email protected] or call our toll free number 1(800)872-5726. We hope to hear from you soon!
@@SalscoInc YOUR WELCOME!!!! 👍😉😉😉😉😉💛😎💛😁😄😃😀☺️❤️🧡💛💚💙💜🖤♥️🤘🤟👍😎😎😉🤩☺️
@fairwayjohn63363 жыл бұрын
Looks awesome!
@SalscoInc3 жыл бұрын
Thanks John!
@avontaprice62963 жыл бұрын
Is that how it discharge????? Also why is it making a pile of chipping & blow chippings at the same time??????😕😕😕😕😕😕😕😕😕😕🤨🤨🤨🤨🤨🤨🤨🤨🤔🤔🤔🤔🤔🤔🤔
@SalscoInc3 жыл бұрын
Thanks for watching! What you're seeing is the power of the airflow from the impeller. The SC18 would be paired with whatever solution you choose for sawdust disposal...Something to catch it and transport it away, like a conveyer belt. For any customization questions give us a call at 1-800-872-5726.
@avontaprice62963 жыл бұрын
@@SalscoInc oh okay thanks 👍👍👍👍👍👍👍😉😉😉😉😉😉😉
@luke_haughwout3 жыл бұрын
Great job guys! Very informative...
@user-vd4sv2pj6t3 жыл бұрын
👍👍👍👍
@bennewton87573 жыл бұрын
Powerful machine
@SalscoInc3 жыл бұрын
Thanks Ben! Give us a call if you're in the market for one...800.872.5726
@mgttreecare3 жыл бұрын
How does the 8637tk handle Palm Frons. We do alot of palm tree Trimming, and canopy work. Looking for something with a feed wheel that we can get into the backyards.
@SalscoInc3 жыл бұрын
Great question! Yes, it will absolutely handle Palm Fronds. This machine would be perfect for what you are describing...Give us a call at 800 872 5726 and ask for Sal or Jack Rizzo. Thank you!
@johnguswel26803 жыл бұрын
Hello, I am interested in this piece of equipment. How can I contact you?
@SalscoInc3 жыл бұрын
Hi John, give us a call at 800.872.5726 and ask for Jack Rizzo. Thank you!
@johnguswel26803 жыл бұрын
@@SalscoInc great! do you have whatsapp number?
@SalscoInc3 жыл бұрын
@@johnguswel2680 We do not use WhatsApp but you can send us a message on our Facebook page, or email [email protected]. Also the 800 number should be free...Thank you
@julioescobar52533 жыл бұрын
What’s the brand of this machine? Who sells it?
@SalscoInc3 жыл бұрын
Hi Julio, this is a Salsco 12" Shaving Mill, built and sold by Salsco. Call 1-800-872-5726 to speak with Sal or Jack Rizzo. We customize made to order Shaving Mills. Check out www.salsco.com to learn more. Thank you
@SalscoInc3 жыл бұрын
For more info on our Shaving Mill options, click here: www.salsco.com/products/shavings-processing-equipment-2/Shavings-Equipment.html
@beztruda22273 жыл бұрын
Очень аккуратно!!!
@Woundedsyria3 жыл бұрын
How the asphalt is compacted?
@SalscoInc3 жыл бұрын
Thanks for the question! Our machine puts the material down very evenly and smoothly, but most people will do a second pass with a rolling machine.
@brucebonkowsky94063 жыл бұрын
Nice equipt
@SalscoInc3 жыл бұрын
Thank you Bruce!
@luke_haughwout3 жыл бұрын
Those magnets work super fast...Everyone should get these on their machines!
@Partytourer3 жыл бұрын
I also think this is an awesome machine! But I bought a new "6-inch" chipper with dual feed rollers in 2007 and owned this machine for 8 years, after this time I would not buy a "6-inch" chipper again because it is too big to reach a "35-inch" door and to small to feed large Christmas trees or large limbs. Actual I have my third hydraulic feed chipper with electronic no stress system the machine is also self-propelled and can reach a "35-inch" door. I think you should release your 810 XT on tracks with long wheelbase to compete with the Hansa C60 RX 10 inch track chipper!
@SalscoInc3 жыл бұрын
Thanks for the feedback!
@rudycarlson82453 жыл бұрын
What engine is in this chipper?
@SalscoInc3 жыл бұрын
Hi Rudy, this machine can be built with several different engines, depending on what your needs are...Give us a call at 1.800.872.5726 and ask for Jack Rizzo. Thanks for watching!
@luke_haughwout3 жыл бұрын
This is an awesome machine!
@_P0tat07_3 жыл бұрын
I like the idea of a dual conveyor machine, but I’d rather have it on a 4 wheel utility vehicle. Such as a John Deere Pro-Gator. If I could have one built my way, I’d like one with electric actuators to raise and lower the conveyors. That would be the bees knees.
@SalscoInc3 жыл бұрын
Thanks for watching! The Salsco CRV not only picks up the cores, but it rolls and smooths the surface...Giving you a fantastic playing surface with no tire marks. When the machine is not in use as a core recovery vehicle, the elevators and collection box can be removed in less than one hour, giving you a great roller. So, the CRV is a two in one machine. Once again Salsco gives the customer more value for your dollars! - Sal Rizzo, President -Salsco, Inc.
@treydogg773 жыл бұрын
Can you all make one of those in a 38” cut sloped yard model?
@SalscoInc3 жыл бұрын
Thanks for the great question, Trey! The rolls are 36" on our machines. But check out our HP11-III for a wider machine or feel free to give us a call at 800-872-5726 to discuss, or email Jack Rizzo at [email protected].
@treydogg773 жыл бұрын
Nice shop, and I see you got a bridge crane as well!
@SalscoInc3 жыл бұрын
Yes, thanks for checking it out Trey!
@zackgunter34594 жыл бұрын
Is there a fuse box? Ours ain’t getting any power and the battery is hot so I think we blew a fuse but can’t find any fuses?
@zackgunter34594 жыл бұрын
Is there a fuse box? Ours ain’t getting any power and the battery is hot so I think we blew a fuse but can’t find any fuses?
@SalscoInc4 жыл бұрын
Hi Zack, please call us at 800-872-5726. Ask for Jack. Thanks!
@joymulund18604 жыл бұрын
How does it work?
@SalscoInc4 жыл бұрын
Thanks for watching, Joy! The operators wear magnetic bracelets...If these magnets pass in front of the Salsco Safety Shield, sensors in the plates send an instant signal to the chipper’s feeding mechanism, shutting it down in less than a second. Then the operator has to use the same magnetic bracelet to reset the device to resume the feeding mechanism!
Great piece of equipment, love it, saves all that wheel barrowing and wraking and better finish
@SalscoInc4 жыл бұрын
Thank you!
@ethanhull77424 жыл бұрын
What do those things cost
@SalscoInc4 жыл бұрын
Thank you Ethan for your inquiry...Contact us at [email protected] and a representative will be happy to answer all your questions!
@swampyyards4385 жыл бұрын
Can you still get this?
@SalscoInc4 жыл бұрын
Yes, you can. Contact Salsco directly.
@swampyyards4384 жыл бұрын
Thanks
@humdrummed5 жыл бұрын
they used to roll fairways with a steam roller in the early 1900's...very similar to the greens roller I used when working a t a golf course...Do you use this as a mowing alternative or just to smooth and speed up the fairways?
@SalscoInc3 жыл бұрын
Thanks for the great question! Our rollers are for smoothing fairways as you said, as well as water management! Feel free to give us a call at 800-872-5726 to discuss, or email Jack Rizzo at [email protected].
@joymulund18605 жыл бұрын
The machine looks robust just one query do you have shock absorbers on the wheel ?
@STEVEANDDAVEFILM5 жыл бұрын
Is this being driven by hydraulic s rather than pto
@joshswan18354 жыл бұрын
yep.
@tomtiernan82155 жыл бұрын
Very impressive!
@SalscoInc4 жыл бұрын
Thanks for the great feedback Tom!
@kellywright87715 жыл бұрын
Wow this really sucks Pun intended
@theresadeady5874 жыл бұрын
The vaccums like the Grinchs vaccum form the live action Grinch movie watch it again then when he begins to rob christmas from the first house you will see that vaccum sucking up the presents into the grinchs sleigh
@wirenchangoer41015 жыл бұрын
I could do this all day! Shredding the crap outta them branches.