Did the lifter fail and seize up? Or was that cam lobe made of butter?
@NightAndDayPerformance3 күн бұрын
yes lifter needle bearings were shot and caused the roller to lock up under load.
@whoknows59684 күн бұрын
I was going to say it could’ve been a technician prior to it being at auction but then I saw the welding on the muffler😂. I’ve seen techs weld control arms and tie rods so they can drive the car into the shop to do an inspection. But they did that because they had to get under the cars to show what was wrong and why it should be wholesaled…
@NightAndDayPerformance4 күн бұрын
no clue
@mrt89644 күн бұрын
More than likely a mechanic with no welding experience not the first time or last u will see that
@NightAndDayPerformance4 күн бұрын
unfortunately this is true
@Raptor33884 күн бұрын
Hey it's crap, but believe it or not, I've seen far worse.
@THEBOYBEANS4 күн бұрын
That would be my fat ass
@josephpeluchette1914 күн бұрын
We all would like to say some kid in a backyard with a torch but we know it was a pricy shop embarrassing for us all
@NightAndDayPerformance4 күн бұрын
yep lol "I can fix that no problem"
@MVPisME3834 күн бұрын
That's all factory😂
@NightAndDayPerformance4 күн бұрын
100%
@nocturnallane51394 күн бұрын
Looks like it has more cancer than anything in the world. LoL
@NightAndDayPerformance4 күн бұрын
😅🤣
@hinatastyles32894 күн бұрын
Lets now compare it to one of your weld!! It could it been done by an amateur owner... not necessary in a shop.
@NightAndDayPerformance4 күн бұрын
I promise ours are a million times better lol
@mariozamora54194 күн бұрын
Looks ok
@NightAndDayPerformance4 күн бұрын
😅
@RecuerdosTM4 күн бұрын
They Used TEMO welding tools 🔧 😂
@NightAndDayPerformance4 күн бұрын
🤣🤣
@trailwolfzj97624 күн бұрын
Smh that's so bad popcorn booger shit
@NightAndDayPerformance4 күн бұрын
🤣
@mrwealthytimemoney38694 күн бұрын
Bro that's why they sold it at the action
@NightAndDayPerformance4 күн бұрын
yep
@mrwealthytimemoney38694 күн бұрын
@@NightAndDayPerformance every auction car the person selling it is trying to make the most money out of the sale they are gonna Mikey mouse it as much as possible
@Chris000884 күн бұрын
Wow that sounds badass what a difference 👍🏾🔥, I’m looking for something for my 5.7 Challenger.
@NightAndDayPerformance4 күн бұрын
we have this system on our online store. www.nightanddayperformance.com
@zeitlerusmc4 күн бұрын
Bet that welder has a husky box full of Pittsburg tools too lol
@NightAndDayPerformance4 күн бұрын
nothing wrong with Pittsburg lmao "lifetime warranty" 🤣
@chuckwhitson6545 күн бұрын
No argon or flux core but ran it any way
@NightAndDayPerformance5 күн бұрын
🤣🤣
@codyspear12635 күн бұрын
Every time I weld, I feel like it looks like complete garbage. And then I see shit like this and think maybe I'm not so bad after all.
@NightAndDayPerformance5 күн бұрын
nah this was welded by Stevie wonder
@timotheegoulet15115 күн бұрын
Dude WTF? That's absurd
@NightAndDayPerformance5 күн бұрын
yea shits crazy
@srdaniel25 күн бұрын
Looks like the few welds I did on my free harbor freight wire feed welder. I gave up...
@NightAndDayPerformance5 күн бұрын
man the hf welder is better than this. they must have used a flame and solder lol
@user-ir8uk8ey2d5 күн бұрын
Welding a sub-frame, smh. The exhaust isn't the worst I've seen by a long shot, but anything dealing with the structural integrity of a vehicle is serious. Shops like that need to be shut down before they kill people.
@NightAndDayPerformance5 күн бұрын
I agree 100%
@octavioaguilera47415 күн бұрын
But it held up lmao
@NightAndDayPerformance5 күн бұрын
barely. it's cracking lol
@erthany5 күн бұрын
That's scary.
@NightAndDayPerformance5 күн бұрын
very much
@levilivingston9825 күн бұрын
I seen this car at David Stanley dodge in Oklahoma by tinker air force base.
@NightAndDayPerformance5 күн бұрын
yes that's the one. it looks way different now
@levilivingston9825 күн бұрын
@@NightAndDayPerformance I wondered what happened to it once it was gone.
@madroot6 күн бұрын
🤣🤣🤣🤣🤣
@raulcervantes800712 күн бұрын
Which AWE exhaust was installed? The touring or track edition?
@NightAndDayPerformance11 күн бұрын
track
@Stage2_39215 күн бұрын
Did this car get a Converter.
@NightAndDayPerformance13 күн бұрын
manual car. but this car 100% would need 4000+ stall
@Stage2_39213 күн бұрын
@@NightAndDayPerformance 10-4
@williammustang532816 күн бұрын
That's music to my ears 👍👍
@ronbo42216 күн бұрын
Bluetooth Air. It's amazing. 😎
@NightAndDayPerformance16 күн бұрын
It really is!
@madroot17 күн бұрын
Oh thats nasty!
@NightAndDayPerformance17 күн бұрын
she's mad!!!
@AMPJay-uf6wr20 күн бұрын
U mean passenger?
@NightAndDayPerformance19 күн бұрын
yes. that was mentioned in the comment that we said the wrong seat
@cantcme124320 күн бұрын
Sounds absolutely beautiful, there's no better sound than ah Hemi..."Dodge, the brotherhood of muscle"
@WranghisKhan21 күн бұрын
Bought this Cam yesterday and now I’m going around looking at Cold Starts and Idle videos of people with it already in 😂
@NightAndDayPerformance21 күн бұрын
great selection!
@latronyasearcy505723 күн бұрын
I’m glad I didn’t see this the day of the storm. ❤
@NightAndDayPerformance23 күн бұрын
that's when dezja was yelling at me and you were on the phone lol
@viljamskrucis411528 күн бұрын
Thanks man! I really needed to see someone do it cuz im taking the cab off of a ram 1500 5.7 hemi
@NightAndDayPerformance27 күн бұрын
it's really not too bad. 8 bolts and some wires
@1sweet_ta28 күн бұрын
Stock pistons? Fuel? Compression ratio?
@NightAndDayPerformance27 күн бұрын
No. Forged High Compression FRP drop ins, E85, and compression is right around 13:1:1
@1sweet_ta27 күн бұрын
@@NightAndDayPerformance awesome can't wait to see this beast running!
@demontriacoleman9038Ай бұрын
I have a 2800-3000 stall converter will it work with this cam?
@NightAndDayPerformanceАй бұрын
3200+ is recommended but with good tuning 3000 could work. I would consult your tuner with specs
@ChadsGoneDivingАй бұрын
Did they do a DoD delete at the time of the cam swap? With 60k miles why not delete the AFM/DoD issue at that point? Great video. I'm hoping to be doing this sometime soon on my '19 GS.
@NightAndDayPerformanceАй бұрын
yes with the larger cams we always delete it
@KayTroll-ve7epАй бұрын
But could my gt sound this mean and nasty 😍😍😍
@RicoMeanАй бұрын
I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
@NightAndDayPerformanceАй бұрын
you can but you may need the dash harness and bcm
@RicoMeanАй бұрын
I just got a 2011 Durango and it got a srt engine in it can I change the pumpers the screen dash bored cluster and seats from a 2016-2020 srt Durango ?
@3HunDunKyleАй бұрын
Can’t wait to get my car to yall got me antsy😬 lol
@NightAndDayPerformanceАй бұрын
bring it on!! 😁
@user-oe8ht3yf9tАй бұрын
How do you separate the air deflectors from the bumper?
@NightAndDayPerformanceАй бұрын
if your talking about the plastic underneath you have to drill out the rivvets
@Dahtective17Ай бұрын
Do you guys recommend align honing the mains when you use arp main studs?
@NightAndDayPerformanceАй бұрын
it is recommended but your not 100% required
@NightAndDayPerformanceАй бұрын
just verify clerances if you don't
@Dahtective17Ай бұрын
@NightAndDayPerformance awesome, thank you. Your videos are great :)
@NightAndDayPerformanceАй бұрын
@@Dahtective17 thank you
@BigHappysPlaceАй бұрын
This is only the location for the aux battery. Where is the main battery?
@NightAndDayPerformanceАй бұрын
this is the main battery
@jayz5xАй бұрын
Sounds really good what frp cam it has and exhaust and what was the gains from stock?
@NightAndDayPerformanceАй бұрын
This is the Titan II blower cam. On average the Cam kits give 60-100hp. on this one you can expect about 3psi increase in boost
@BlacktopBullyRacingАй бұрын
I get connecting pump 1 & 2 but what do you do with the other connection ( 2 blue wires)
@NightAndDayPerformanceАй бұрын
they tap into the fuel level sender from the factory harness
@BlacktopBullyRacingАй бұрын
@@NightAndDayPerformance thanks , loved the video , helped me install mine this weekend
@SRTDC4 күн бұрын
@@NightAndDayPerformancethank you, I was just wondering about this!! Now I have an orange & purple wire that I still have to connect somewhere.